This thread contains the cleartype-like freetype, cairo, libXft packages for 13.1. Please refer to "Beautiful Fonts in 12.1" The patches for freetype, cairo and libXft are all come from the thread above, with a little modification so libXft can be patched successfully. You can find the patches and slackbuilds used for these packages, precompiled binaries as well.slackbuilds including patches:[URL]
View 14 RepliesI'm interested in seeing what others are doing w.r.t. fonts in a standard Slack install. The 2 main apps I use are Firefox and Thunderbird and both look fairly poor out of the box. Previously I've used a combination of gtk-qt-engine and gnome-appearance-properties ( with a gsb install ) but this doesn't always do the 'right thing'.
View 2 Replies View RelatedNow I know that I could use "consolechar" command with option "f " to set other fonts temporarily. The problem for me now is that I had tried almost all of those fonts in directory /usr/share/consolefont/, but I could not find a suitable one, none of them are beautiful. So, I hope one can tell me how to get the fonts and how to set the font I like to be lasting.
View 1 Replies View RelatedHow i can configure my conky application to make the gui beautiful ! i can't find a good tuto.
View 4 Replies View RelatedI have a full install of Slackware 12.2 and am using KDE 3.5. The other day, an application I was using threw an error about not being able to find a font, specifically code...
Finally, the KDE "Font Installer" program only shows 166 fonts (87 families) in administrator mode.
Question time.
The big question is in KDE, what actually controls which fonts are available to other programs? Are only the fonts displayed in the "Font Installer" app actually available, and if so, how do I make everything available.
I know which lines in xorg.conf set the font path so I can adjust and add others if needed. However, one thing in the font paths confuses me. It concerns the entry "/usr/share/fonts/75dpi/:unscaled" What does the ":unscaled" part mean? I ask because I have no subdirectory of "/usr/share/fonts/75dpi" called ":unscaled"
Final question. Is there a log somewhere that would show exactly which font is being requested but not found? I've looked in /var/log/Xorg.0.log but didn't find anything.
I would like to know if there is a fix for firefox font menus, also the font for bookmarks, the problem is that these fonts are too big , like 16 , instead of 10 or 12
i've had this problem with all linux distros that i've used, everything is fine except the menu and bookmark fonts in firefox, same in chrome, menu and bookmark fonts are big, anything i tried i could not make it look like the normal font sizes in windows or even Konqueror. and it not that only that it is big fonts, they are also wide.
I cannot found arial fonts .tgz. How to install it if we found it.
View 14 Replies View RelatedI don't know whats changed but since I installed 13.37 the fonts in fluxbox are crappy looking.Is there anything I should know thats changed with regards to this.They were fine in 13.1.
View 2 Replies View RelatedI have RAR archive including some files using Russian file names and I?m unable to display them properly in xterm window in my Slackware 13.1. Instead of the Cyrillic letters I see questions marks, for example ??.txt?.I tried four methods:
Code:
xterm -en iso-8859-5 -fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso8859-5
xterm -en koi8-r -fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-koi8-r
[code]...
Some time ago I optimised my fonts following dugan's great tutorial. I mostly used Seamonkey to browse so I didn't notice the difference until today I ran Firefox. The font preferences seem to be identical, yet the fonts look differently on each browser. See the attachments (the browser on the left-hand side is Seamonkey)
View 2 Replies View RelatedI'm trying to identify - and eventually uninstall - exotic fonts packages, but unfortunately, the package names in the X group - as well as their descriptions - are not always very helpful.
I'd like to uninstall every font that's not needed to write in either french, german or english, that is: arab, asian, greek and cyrillic fonts, plus the odd exotic font I haven't thought of.
The reason I'm doing this is not some sort of xenophobia on my behalf, but the simple fact that the LibreOffice font selector is quite crowded when all the font packages are installed. Since the desktops I install are primarily used by folks who freshly migrate from Microsoft windows, I've found that a mix of standard latin fonts plus the webfonts (XP + Vista) fonts package from SBo is the most popular solution. At least, that's what I did until now when installing other Linux distributions.
FYI for Khmer people trying to use Slackware there is no equivalent to the Debian package ttf-khmeros.To install the Khmeros Fonts
Now you should see lovely Khmer fonts instead of a bunch of squares. I imagine this works for other languages too.For more information about Linux in Cambodia go to KhmerOS at:URL...By the way Kde is the best translated desktop for Khmer and LibreOffice also is translated.
I just upgraded from Slackware 12.2 to 13 and most things seem to be working fine (with the exception of the new Amarok, which crashes).However, in the GTK applications I use (Firefox, Gimp, Aumix), all the fonts have been replaced by square boxes.point me in the right direction on troubleshooting this problem? Did I miss a step or do something wrong while upgrading?
View 1 Replies View RelatedIs there any way to use TTF fonts for the screen (CLI not X-Windows)? I added a font in /usr/share/fonts/TTF and updated all font directories, and then issued the setconsolefont command, but my font is not there. Actually, I didn't see any TTF fonts in the list at all, even though there are already some in the TTF directory.
View 2 Replies View Relatedwhen running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
View 2 Replies View RelatedAfter i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]
View 2 Replies View RelatedRecently I was creating an image in GIMP when I needed to add a new font. I went to my mounted XP drive and copied the file I wanted over into /usr/X11R6/share/fonts/TTF then I went to the font installer as root and installed the font system wide. After that I reloaded GIMP and the font was available. A little while later I went to browse the internet and when I loaded up firefox, it showed a properly formatted and spaced page with no text on it at all. If I highlighted a line, the invisible text would copy to the clipboard properly and I could read it that way. I figured it might've been a just a FF issue, but when I loaded up Seamonkey, I wound up with the same problem. I'm using Firefox 3.0.16 and Seamonkey 2.0.1. I tried going into the preferences and changing the default font, but no matter what I change it to, it doesn't fix it. Slack 1.2 running kernel 2.6.27.31-smp. I use slapt-get to stay up to date and as far as I can tell i have the latest patches and pkgs.
Code:
bash-3.1$ fc-cache -rv
/usr/share/fonts/OTF: caching, new cache contents: 23 fonts, 0 dirs
/usr/share/fonts/TTF: caching, new cache contents: 91 fonts, 0 dirs
/usr/share/fonts/Type1: caching, new cache contents: 64 fonts, 0 dirs
[code]....
I have successfully installed Slackware 13.1 with the help of a brilliant guide and some reading on my own. And I am loving it. I have installed few applications and feel that the I understand the system more better than any other linuses I tried.
But, the initial fonts look quite out of focussed(can't find a word) or simply ugly?
I searched and found few threads and a dugan's blog but I got confused as to what to do exactly....How to make fonts beautiful or focussed?... This is my first query.....
Also, a second query is about updating the system...I installed Slackware 13.1 DVD without KDE( Yes I love xfce). As I see I used the "slackpkg" utility to update.
First, uncommented the # sign from one of the mirrors in /etc/slackpkg/mirrors and ran slackpkg update
And the next time when I ran the same, it said "No changes in change log between last update and now". I gather it means my system is upto date but I have doubt about it. How do I conform if the system is upto date? Should I necessarily subscribe to the mailing list? It a thing I haven't done yet.
I use Slackware 13.1. So far I chose during the installation of the system lat2a-16.psfu.gz font and my applications worked well in console mode. Now the same applications with the same font display gridded rectangles instead of some diacritical characters. In /etc/rc.d/rc.font I have standard setfont -v lat2a-16.psfu.gz command:
/etc/rc.d/rc.font:
Code:
setfont -v lat2a-16.psfu.gz
In /etc/rc.d/rc.keymap I have standard loadkeys pl2.map command:
/etc/rc.d/rc.keymap:
Code:
if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys pl2.map; fi
Standard setfont -v lat2a-16.psfu.gz command reports for some reason loading of the Unicode mapping table:
# setfont -v lat2a-16.psfu.gz
Code:
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2a-16.psfu.gz
Loading Unicode mapping table...
[code]....
I examined /etc/rc.d directory but I didn�t find the setting switching the console to the Unicode mode. The same with env and set commands outputs. I tried to overwrite Slackware 13.1 /usr/share/kbd/consolefonts/lat2a-16.psfu.gz with lat2a-16.psfu.gz file provided in kbd packages from Slackware 12.2 and 11.0 but the results were the same. I suppose the problem is caused by improper handling of the system settings by the kernel but I�m not sure.how can I get rid of Unicode console font and keyboard layout and come back to ISO-8859-2 font and keyboard?
I am having some problem with fonts in some websites in firefox. The fonts will not be visible! The image should be self explanatory. Let me add that I am trying to add support for unicode in linux something that I wasn't much familiar with up until now - so I messed a few things up before I managed to unicode in linux command line and konsole terminal. Additionally, I tried adding true type fonts (which I added in a new sub-folder /usr/share/fonts/ms-ttf) and run fc-cache. Moreover, I installed the fonts system-wide from within KDE system settings. In the end: I am stuck with a semi-working firefox; facebook and digitalblasphemy to name a few don't show any fonts.
Gmail and other sites work fine. Google-chrome has not been affected at all - all pages show up fine. Also the extra 'ms-ttf' fonts that I installed in kde system-wide do not appear in libre-office in the available fonts.. I am not sure if this has to do with the more general mess I've caused or it is some more specific matter. I tried following [URL] tips in compiling firefox but I decided not to install requiredbuilder in order to proceed with the installation - I ended up installing frefox-3.6.12 from -current, but the problem persists.
I'm running -current (13.37) 32 bit and have installed OpenOffice 3.2.1. The problem is the menu fonts in OpenOffice which look very thin and are not smooth. All other application fonts look very good. When I had this same version of OpenOffice installed on Slackware 12.2 I did not see this problem.In OpenOffice I have ticked the option to use system font for user interface but this doesn't seem to have any effect. I've also ticked the screen font anti aliasing option because the fonts look worse when this is not ticked. My KDE system font is DejaVu Sans, the same as it was on Slackware 12.2.
My OpenOffice package was built using a script written by Robby Workman which I think I got from his web site a long time ago. It takes the rpms and creates a Slackware package.
<Edit> Got it fixed. Didn't put the correct res in the xorg.conf file...Sheesh...None the less, this is the moment that I do a little dance around my little space...I got current up and running with only asking this dumb question...Hoo howdy...It's GRRRRRRRRRRRREAT...Now to test to see if everything I had on 12.2 will compile...So far gbdfed is not doing so.../edit>Sorry if this has been posted before, and I will look for it later if no one replies, I'm just bloody burnt out at the moment...Hooked up 122gb hd, and rather than spend the hours reading up on dd, I decided to try 13.0...Lo and behold my 845g didn't work, which I had suspected would have been the prob...So I fuddled around, read, and read, and read some more...Upgraded to current, based on a thread here...Forgot to check lilo for any errors...Hoo boy, what fun...Current changed the drives from hd# to sd#. Had to use my old zenwalk 5.2 disk to chroot in order to fix that. Then something else went wrong. Well, now I know what mkinitrd is good for, . Well, fuddling around some more, installing this intel driver, installing that intel driver until I finally found something that worked...However, I get better frame rate with glxgears than I did on 12.2, but when I move any windows they are a little choppy, plus the little tiny fonts which is rather annoying...Anyway, what else should I look at? Could it be xinarama support which I don't need?
View 2 Replies View RelatedWhen booting into my slack12 fluxbox desktop today my fonts were so small they were hard to read. The same is true if I use kde. I didn't change anything that I can think of. I tried running fc-cache but it didn't change anything. My xorg.conf hasnt changed. Interestingly, my xterm font didn't change size, but the konsole font is tiny like my other desktop fonts.
View 3 Replies View RelatedI just finished installing a bunch of truetype fonts. After installing them, firefox is displaying "bradybunch" font when I search google.
The font settings are all serif and sans serif in both the system fonts settings and firefox settings.
I am using ubuntu 9.10.
Any idea why this could be happening?
I would like to use the Adobe Garamond Pro in my text doccument in open office writer. I got a text document where from a friend where it is used so I know that it can. But when I want to edit I cant find it in the fonts dropdown menu.
View 2 Replies View RelatedI have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.
How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?
I have just installed openSUSE 11.2 X86_64 on my laptop, I then used KDE to install lots of type 1 fonts for my printer. These get loaded to /usr/local/share/fonts/...These installed fonts are visible to KDE (KWRITE) and GIMP so I assume that the installation was O.K. When I start openOFFICE writer I do not see these fonts. The font selection appears to be the fonts located under /usr/share/fonts. I have not tried other ooo3 components. I assume that they are not going to see the fonts either.
I have searched google and it appears that /usr/local/share/fonts is the correct location for non-packaged fonts. Has anybody any idea what is wrong? I think I could move all the fonts to /usr/share/fonts and ooo3 would work but this seems to break the installation directory structure. I have considered symlinks but I don't like the idea of defining a font twice to Linux and creating the syslinks is more work than reinstalling the fonts if they are lost
1. What do I need to set all the fonts to in 11.04 to make them look more like W7 fonts?2. Is there a way I can improve the graphics in WINE? Some very simple games run slow. Is there a way I can change the cursors in wine.
View 3 Replies View RelatedI am trying to install the open office suite using Add/Remove Software. It however give the following error:
Code:
dejavu-serif-fonts conflicts with dejavu-fonts
dejavu-sans-fonts conflicts with dejavu-fonts
dejavu-sans-mono-fonts conflicts with dejavu-fonts
Just sharing some progress with font instalation in fedora 10, because there is no more support to xfs or chkfontpath. Take a look at /etc/fonts/fonts.conf, in the beginning of this file you can find:
Code:
<!-- Font directory list -->
<dir>/usr/share/fonts</dir>
<dir>/usr/share/X11/fonts/Type1</dir>
<dir>/usr/share/X11/fonts/TTF</dir>
[code]...
To install true type fonts, just throw your fonts in one of these directories. You can put it in your own home if you want (~/.fonts). With this, you can install any fonts, like windows fonts, mscorefonts ... Don't forget to restart X and test with fc-list.