I just upgraded from Slackware 12.2 to 13 and most things seem to be working fine (with the exception of the new Amarok, which crashes).However, in the GTK applications I use (Firefox, Gimp, Aumix), all the fonts have been replaced by square boxes.point me in the right direction on troubleshooting this problem? Did I miss a step or do something wrong while upgrading?
View 1 RepliesI have a couple things I think is my video card. One annoying thing it does is to put half inch square boxes in random places and times that might be trying to display what was in that spot before you changed the window. Sometimes it can be important information so I had to find a way to do something about it. I couldn't get rid of them but I could move them out of the way by moving the pointer to a different area and turning the scroll wheel. That would put the square in the new area where the pointer was.
The other thing is very bad scroll control. Sometimes I would have to use the arrows in the corner. Sometimes I had to drag the slider which moved hard, not at all or very delayed. The squares also make highlighting very difficult. Because an area will not be highlighted you don't know the results until you paste it. It might be perfect. I believe the video card is on the motherboard. I do have a spare slot so If needed I could put in a new one. Where is my title bar at the top of a screen which allows you to move it around or -minimize or maximize or close.
Don't know how this happened, but I only see small boxes instead of my fonts on the desktop, in the title bars or on the panel
I really don't know how to fix it..
When I turn on my computer running Ubuntu 10, everything works fine except there are no fonts displayed anywhere, and instead i see boxes (like when a character is missing). If i go into a terminal, i see that i have plenty of fonts installed. I noticed a pango error earlier, but I can't reproduce it right now because I am not near that computer. I tried reinstalling libpango to no avail. I have never heard of something like this, can anyone shed some light, or offer some suggestions on what could be wrong?
View 2 Replies View RelatedI reinstalled Fedora 11 last night because i saw that I could leave out packages that I don't need by unchecking everything in the software selection screen. Anaconda installed about 179 packages and I rebooted. I installed X, GDM, and LXDE, but whenever, I start GDM, all the fonts show up as random boxes, ie. there's no english on the sceen, just boxes. I'm pretty sure that i forgot to install a font that fedora uses for gdm but i don't know which one to install.
View 1 Replies View RelatedMy video suddenly stopped working. I get strange lines across the screen, a weird white box around the cursor and all the fonts are messed up (much similar to this thread http://ubuntuforums.org/showthread.php?t=1395788)I think the problem started when updating to kernel 2.6.31-22, but booting into 2.6.31-21 (which worked just a few days ago) does not solve the problem. I have also tried to disable all screen effects and I have installed the radeonhd driver - without any luck.
View 2 Replies View RelatedIn CentOS 5.4 (Final), emacs is displaying characters as little boxes. see attached screen shot. I searched the Web and found others have this same problem with emacs in CentOS 5.4 but have not found any solution. I installed emacs in a base CentOS Amazon EC2 instance as follows:
yum -y groupinstall "GNOME Desktop Environment"
yum -y install emacs
yum -y groupinstall emacs
This issue does not arise for me in Amazon EC2 instances running Red Hat, Fedora, or Ubuntu when I install emacs as I did here. I am not X font savvy
Just finished installing slackware 13.37 64 bit on two boxes which are connected to the modem. I ran netconfig to enable dhcpd and the two boxes are on the internet working. Now, what I don't understand is how should I access(r/w) files from one another.
View 3 Replies View RelatedYou may know that there was a security release for Adobe Flash Plugin for Linux x86 but not for x86_64. There has been a development:
See : http://labs.adobe.com/downloads/flashplayer10.html
It works fine here. I have a Multilib Slack 13.1 stable.
I've got a Linksys WRT54G router with the latest firmware. I've got an HP laptop connecting wirelessly and my main box connecting wirelessly with a Linksys WMP54G card. (As an aside, I used to have another box too with the same wireless card). Both are set up with a static IP. Both can access the Internet just fine. The router is on the main floor. My main box is in the basement. Both boxes are running fully patched versions of Slackware64 13.1. sshd is running on both.
I like to ssh into the other box when there's a security update or to copy a file from one computer to the other, etc. The problem is that I can't do that all the time. Even if the laptop is connected to the network and accessing the Internet, on my main box ssh will still "say ssh: connect to host ***** port 22: No route to host". It is my understanding that if I ssh in, it is accessing the other computer directly and not going through the router. What would cause this? Even if I bring the laptop within four feet of my computer, it still can't connect.
There doesn't seem to be a rhyme or reason to when it will connect and when it wont. Sometimes I can access it just fine then about five minutes later I can't.
I'm interested in seeing what others are doing w.r.t. fonts in a standard Slack install. The 2 main apps I use are Firefox and Thunderbird and both look fairly poor out of the box. Previously I've used a combination of gtk-qt-engine and gnome-appearance-properties ( with a gsb install ) but this doesn't always do the 'right thing'.
View 2 Replies View RelatedThis thread contains the cleartype-like freetype, cairo, libXft packages for 13.1. Please refer to "Beautiful Fonts in 12.1" The patches for freetype, cairo and libXft are all come from the thread above, with a little modification so libXft can be patched successfully. You can find the patches and slackbuilds used for these packages, precompiled binaries as well.slackbuilds including patches:[URL]
View 14 Replies View RelatedI have a full install of Slackware 12.2 and am using KDE 3.5. The other day, an application I was using threw an error about not being able to find a font, specifically code...
Finally, the KDE "Font Installer" program only shows 166 fonts (87 families) in administrator mode.
Question time.
The big question is in KDE, what actually controls which fonts are available to other programs? Are only the fonts displayed in the "Font Installer" app actually available, and if so, how do I make everything available.
I know which lines in xorg.conf set the font path so I can adjust and add others if needed. However, one thing in the font paths confuses me. It concerns the entry "/usr/share/fonts/75dpi/:unscaled" What does the ":unscaled" part mean? I ask because I have no subdirectory of "/usr/share/fonts/75dpi" called ":unscaled"
Final question. Is there a log somewhere that would show exactly which font is being requested but not found? I've looked in /var/log/Xorg.0.log but didn't find anything.
I would like to know if there is a fix for firefox font menus, also the font for bookmarks, the problem is that these fonts are too big , like 16 , instead of 10 or 12
i've had this problem with all linux distros that i've used, everything is fine except the menu and bookmark fonts in firefox, same in chrome, menu and bookmark fonts are big, anything i tried i could not make it look like the normal font sizes in windows or even Konqueror. and it not that only that it is big fonts, they are also wide.
I cannot found arial fonts .tgz. How to install it if we found it.
View 14 Replies View RelatedI don't know whats changed but since I installed 13.37 the fonts in fluxbox are crappy looking.Is there anything I should know thats changed with regards to this.They were fine in 13.1.
View 2 Replies View RelatedI have RAR archive including some files using Russian file names and I?m unable to display them properly in xterm window in my Slackware 13.1. Instead of the Cyrillic letters I see questions marks, for example ??.txt?.I tried four methods:
Code:
xterm -en iso-8859-5 -fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso8859-5
xterm -en koi8-r -fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-koi8-r
[code]...
Some time ago I optimised my fonts following dugan's great tutorial. I mostly used Seamonkey to browse so I didn't notice the difference until today I ran Firefox. The font preferences seem to be identical, yet the fonts look differently on each browser. See the attachments (the browser on the left-hand side is Seamonkey)
View 2 Replies View RelatedI'm trying to identify - and eventually uninstall - exotic fonts packages, but unfortunately, the package names in the X group - as well as their descriptions - are not always very helpful.
I'd like to uninstall every font that's not needed to write in either french, german or english, that is: arab, asian, greek and cyrillic fonts, plus the odd exotic font I haven't thought of.
The reason I'm doing this is not some sort of xenophobia on my behalf, but the simple fact that the LibreOffice font selector is quite crowded when all the font packages are installed. Since the desktops I install are primarily used by folks who freshly migrate from Microsoft windows, I've found that a mix of standard latin fonts plus the webfonts (XP + Vista) fonts package from SBo is the most popular solution. At least, that's what I did until now when installing other Linux distributions.
FYI for Khmer people trying to use Slackware there is no equivalent to the Debian package ttf-khmeros.To install the Khmeros Fonts
Now you should see lovely Khmer fonts instead of a bunch of squares. I imagine this works for other languages too.For more information about Linux in Cambodia go to KhmerOS at:URL...By the way Kde is the best translated desktop for Khmer and LibreOffice also is translated.
Is there any way to use TTF fonts for the screen (CLI not X-Windows)? I added a font in /usr/share/fonts/TTF and updated all font directories, and then issued the setconsolefont command, but my font is not there. Actually, I didn't see any TTF fonts in the list at all, even though there are already some in the TTF directory.
View 2 Replies View RelatedThis game is Java based. After rebooting the game works, but on ending the game several notification boxes remain. If these boxes are not closed in the reverse order that the game opened them, it is no longer possible to close them. Only by killing the Java processes can these notifications be made to close. Also after playing the game, even if all these notifications are closed it is many times necessary to kill the Java process(es) in order to get the game to load again at a later time. I am currently using Slackware 1.30, but a similar problem has existed in several of the past releases.
View 4 Replies View Relatedwhen running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
View 2 Replies View RelatedAfter i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]
View 2 Replies View RelatedRecently I was creating an image in GIMP when I needed to add a new font. I went to my mounted XP drive and copied the file I wanted over into /usr/X11R6/share/fonts/TTF then I went to the font installer as root and installed the font system wide. After that I reloaded GIMP and the font was available. A little while later I went to browse the internet and when I loaded up firefox, it showed a properly formatted and spaced page with no text on it at all. If I highlighted a line, the invisible text would copy to the clipboard properly and I could read it that way. I figured it might've been a just a FF issue, but when I loaded up Seamonkey, I wound up with the same problem. I'm using Firefox 3.0.16 and Seamonkey 2.0.1. I tried going into the preferences and changing the default font, but no matter what I change it to, it doesn't fix it. Slack 1.2 running kernel 2.6.27.31-smp. I use slapt-get to stay up to date and as far as I can tell i have the latest patches and pkgs.
Code:
bash-3.1$ fc-cache -rv
/usr/share/fonts/OTF: caching, new cache contents: 23 fonts, 0 dirs
/usr/share/fonts/TTF: caching, new cache contents: 91 fonts, 0 dirs
/usr/share/fonts/Type1: caching, new cache contents: 64 fonts, 0 dirs
[code]....
I have successfully installed Slackware 13.1 with the help of a brilliant guide and some reading on my own. And I am loving it. I have installed few applications and feel that the I understand the system more better than any other linuses I tried.
But, the initial fonts look quite out of focussed(can't find a word) or simply ugly?
I searched and found few threads and a dugan's blog but I got confused as to what to do exactly....How to make fonts beautiful or focussed?... This is my first query.....
Also, a second query is about updating the system...I installed Slackware 13.1 DVD without KDE( Yes I love xfce). As I see I used the "slackpkg" utility to update.
First, uncommented the # sign from one of the mirrors in /etc/slackpkg/mirrors and ran slackpkg update
And the next time when I ran the same, it said "No changes in change log between last update and now". I gather it means my system is upto date but I have doubt about it. How do I conform if the system is upto date? Should I necessarily subscribe to the mailing list? It a thing I haven't done yet.
I use Slackware 13.1. So far I chose during the installation of the system lat2a-16.psfu.gz font and my applications worked well in console mode. Now the same applications with the same font display gridded rectangles instead of some diacritical characters. In /etc/rc.d/rc.font I have standard setfont -v lat2a-16.psfu.gz command:
/etc/rc.d/rc.font:
Code:
setfont -v lat2a-16.psfu.gz
In /etc/rc.d/rc.keymap I have standard loadkeys pl2.map command:
/etc/rc.d/rc.keymap:
Code:
if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys pl2.map; fi
Standard setfont -v lat2a-16.psfu.gz command reports for some reason loading of the Unicode mapping table:
# setfont -v lat2a-16.psfu.gz
Code:
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2a-16.psfu.gz
Loading Unicode mapping table...
[code]....
I examined /etc/rc.d directory but I didn�t find the setting switching the console to the Unicode mode. The same with env and set commands outputs. I tried to overwrite Slackware 13.1 /usr/share/kbd/consolefonts/lat2a-16.psfu.gz with lat2a-16.psfu.gz file provided in kbd packages from Slackware 12.2 and 11.0 but the results were the same. I suppose the problem is caused by improper handling of the system settings by the kernel but I�m not sure.how can I get rid of Unicode console font and keyboard layout and come back to ISO-8859-2 font and keyboard?
I am having some problem with fonts in some websites in firefox. The fonts will not be visible! The image should be self explanatory. Let me add that I am trying to add support for unicode in linux something that I wasn't much familiar with up until now - so I messed a few things up before I managed to unicode in linux command line and konsole terminal. Additionally, I tried adding true type fonts (which I added in a new sub-folder /usr/share/fonts/ms-ttf) and run fc-cache. Moreover, I installed the fonts system-wide from within KDE system settings. In the end: I am stuck with a semi-working firefox; facebook and digitalblasphemy to name a few don't show any fonts.
Gmail and other sites work fine. Google-chrome has not been affected at all - all pages show up fine. Also the extra 'ms-ttf' fonts that I installed in kde system-wide do not appear in libre-office in the available fonts.. I am not sure if this has to do with the more general mess I've caused or it is some more specific matter. I tried following [URL] tips in compiling firefox but I decided not to install requiredbuilder in order to proceed with the installation - I ended up installing frefox-3.6.12 from -current, but the problem persists.
I'm running -current (13.37) 32 bit and have installed OpenOffice 3.2.1. The problem is the menu fonts in OpenOffice which look very thin and are not smooth. All other application fonts look very good. When I had this same version of OpenOffice installed on Slackware 12.2 I did not see this problem.In OpenOffice I have ticked the option to use system font for user interface but this doesn't seem to have any effect. I've also ticked the screen font anti aliasing option because the fonts look worse when this is not ticked. My KDE system font is DejaVu Sans, the same as it was on Slackware 12.2.
My OpenOffice package was built using a script written by Robby Workman which I think I got from his web site a long time ago. It takes the rpms and creates a Slackware package.
<Edit> Got it fixed. Didn't put the correct res in the xorg.conf file...Sheesh...None the less, this is the moment that I do a little dance around my little space...I got current up and running with only asking this dumb question...Hoo howdy...It's GRRRRRRRRRRRREAT...Now to test to see if everything I had on 12.2 will compile...So far gbdfed is not doing so.../edit>Sorry if this has been posted before, and I will look for it later if no one replies, I'm just bloody burnt out at the moment...Hooked up 122gb hd, and rather than spend the hours reading up on dd, I decided to try 13.0...Lo and behold my 845g didn't work, which I had suspected would have been the prob...So I fuddled around, read, and read, and read some more...Upgraded to current, based on a thread here...Forgot to check lilo for any errors...Hoo boy, what fun...Current changed the drives from hd# to sd#. Had to use my old zenwalk 5.2 disk to chroot in order to fix that. Then something else went wrong. Well, now I know what mkinitrd is good for, . Well, fuddling around some more, installing this intel driver, installing that intel driver until I finally found something that worked...However, I get better frame rate with glxgears than I did on 12.2, but when I move any windows they are a little choppy, plus the little tiny fonts which is rather annoying...Anyway, what else should I look at? Could it be xinarama support which I don't need?
View 2 Replies View Related