I was going through Apache Life Cycle
[URL]
I am not new to apache but I am curious to know capabilities of Apache.Where can I get more such as some one who can program a module for apache what objectives can they achieve.
I'm very new to linux and would like to build a 64-bit file server to backup my pc and laptop, I would also like it to have HTPC capabilities because it will be stored in my "man cave", where me and mates seem to hang out a fair bit. I've never built an AMD system before and would like this build to be AMD.
This is what I've come up with so far:
64-bit system:
Case: Thermaltake V3 with 450W PSU
CPU: Athlon II x2 255 3.1GHz
Mobo: ASRock 880GXH-USB3
HDD: WD Green 500Gb for OS, 2x Samsung EcoGreen 2Tb for storage (one will be kept off site)
Memory: 1x Corsair CMV4GX3M1A1333C9 4Gb DDR3
[Code]...
I'm not sure about all this being compatible with linux, like the tuner, but I have read that you can get this working. I'm on a pretty tight budget so I can't upgrade to higher end components, but would like suggestions on components where I could save a few $$ or if any of these components are overkill.
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
heard about App runner. Does it have the capabilities of running Adobes CS3 or CS4? if so how? Also having issues using Cross-compliler and Wine to sort this out.
View 1 Replies View Relatedwhat capabilities a wireless ad hoc network?
View 1 Replies View RelatedTake a look at the picture. 1 refers to the mail icon, which has pidgin in it (I couldn't screenshot while open for some reason), and 2 refers to the icon that can be clicked which has the capabilities to set "available, away, invisible, etc" and that type of thing. Problem is, I no longer use empathy, I use pidgin instant messenger. Can I use the #2 icon referred to in the picture to control my status for pidgin?
View 4 Replies View Relatedi am in the process of setting up my wonderful slackware system on my laptop, and now i would like to make sure i am able to run as much multimedia as possible (to be up to snuff in this realm with mac and windows users). i am running slackware x86_64 version 13.0 with a full install (but only with the software sets a, ap, d, f, k, kde, l, n, x, xap, y) and have installed flash-player-plugin from slackbuilds.org.
recently i stumbled upon this website: [url] it explains precisely what i would like to know: which packages should i install to get a fully-featured multimedia slackware install (and in which order should i build/install these packages to take care of dependencies). i emailed the author to make sure this guide was up to date with slackware 13, but, sadly, it is not. it seems that mr. anderson uses slackware 12.2, and thus there may be inconsistencies between what this guide explains and what works on the newest slackware. for example, mplayerplug-in has been depreciated in favor of gecko-mediaplayer. i need to know if more of this has happened. i would simply test it myself, but i have been distro-hopping reinstalling repeatedly over the past few weeks for various reasons, and i am trying to avoid dirtying up my system too much and having to reinstall yet again.
so i ask of you, does mr. anderson's list apply to slackware 13.0, or are there any changes that need to be made? i ask because someone here may have already used this guide and may be willing to share their knowledge and experience on it. eric's vlc slackbuild is very interesting, and i plan to run that, so vlc and its dependencies are covered. my multimedia needs are not too demanding, but i do expect web media to work flawlessly. i often visit www.apple.com and watch movie trailers, guided tours, etc., so i need quicktime videos on the web to work. videos and online flash games already work fine with flash-player-plugin. i also visit some web sites that have windows media formats being streamed (.wmv and .wma).
I have a Gigabit network card that it's using r8169 kernel module and is not showing 1000 mbps capabilities; instead it is showing the following:
Code: Select all mii-tool -v
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:00:20, model 32 rev 1
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
I was able to use this nic with gigabit speeds in the past...
I just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.
View 9 Replies View RelatedI would like for X11 something like dvtm.
Could you post the possible package names that does that?
I'd like to modify a linux distro, specifically Puppy, so that the drivers/mechanisms for mounting local HDDs and Networking is Disabled completely. A step further than simply disabling "auto-mounting" at boot time, I don't even want mounting to be possible (at least by default).Likewise, further than just disabling network devices, I'd like to remove the ability to use network devices. How are these "mounting" and "device drivers" mechanisms implemented, where are they, and what are my options?
View 14 Replies View RelatedIt is known that binaries with the SetUID bit enabled are a threat for the system.I saw on this ArchLinux wiki[URL].tead_Of_Setuida way to limit the use of SetUID bit thanks to POSIX capabilities.It looks very interesting.Does anyone of you used it already?Is it a burden for the system afterwards (like binaries not working, needing to be fixed); or is it seamless
View 3 Replies View RelatedI recently installed Ubuntu 9.10 onto an older laptop for my boss. However, after installation I lost all internet capabilities... both through wireless and ethernet connections. There is zero indication that Ubuntu is picking up any wireless connections at all and when I plugged into an ethernet connection Ubuntu acts as if it is trying to connect, however unsuccessfully. I have eliminated the internet connection as my problem because I was able to connect with my laptop running 9.10 with no problem. I have searched and searched everywhere for fixes to this problem however 99% of them need an internet connection to install the required firmware and drivers... is there any OFFLINE solution out there?The computer is a Compaq Presario 2200 with a Boradcom Corp BCM4306 802.11b/g Wireless LAN Controller
View 4 Replies View RelatedA kind fellow Linux enthusiast told me about DrummerDP project grub24dos.
Here is two links to it.
grub24dos announcement on Reboot
grub24dos on SourceForge
Iam not on that level so I can only trust his words for it. He start up on MsWindows and install it from that OS.
He recommend one do a back up first in case something unexpected happen No warranty.
The very good thing is that it gives grub2 ability to boot isos on a NTFS formatted HDD. Isos that one otherwise had needed to place on a Ext2 formatted partition and that could serve those who want to preserve windows for Gaming?
I have an internal PCI sound card, and I would like to find out what MIDI capabilities it has, if any. It is currently using the ens1370 ALSA driver. It has the standard Line in, Line out, and Mic jacks, as well as what appears to be a game port. I think it has some MIDI capabilities, because "cat /dev/snd/midiC0D0" does not fail with "no such device or address," but I don't know if it has MIDI input capabilities, or if it can synthesize, or what. Is there any way to tell?
View 4 Replies View RelatedI want to extend my perl capabilities using CGI. So, could you please tell me where to start and how to start my cgi scripts on linux RHEL AS 4 system.
View 4 Replies View RelatedWhen I upgraded from Karmic to Lucid, I guess one of those upgrades was the tex engine, it was upgraded to texlive 2009.Though It can render everything I could render beforehand, I am having trouble about one thing. I cannot use the additional preferences that can be used to edit an image when using includegraphics function.
For example:
egin{figure} [H]
centering
includegraphics[width=0.7linewidth,angle=-90,trim = 5mm 8mm 10mm 0mm, clip]{example.ps}
end{figure}
Used to rotate my ps file, trim it, then scale it as specified. Now, I get an error:
./Rapor.tex:59:Illegal unit of measure (pt inserted) ...e=-90,trim = 5mm 8mm 10mm 0mm, clip]{example.ps}
If there is only [width=linewidth] tex doesn't recognize linewidth and prints:
./Rapor.tex:59:Missing number, treated as zero...includegraphics[width=linewidth]{example.ps}
and the output file has the text within the square brackets, rather than the image.
Somehow there is a problem or a change in how this usage is interpreted. I am using:
usepackage{float}
usepackage{graphicx}
packages that are related to graphics. I'm using Kile 2.0.85, but the problem is editor independent, I get the same results with Texmaker. I am using the exact same .tex sources that I used with Karmic.
What I've tried:
I installed texlive packages from scratch, with Kile.I changed the graphicx.sty file with a version that I found on the net.
I was wondering if anyone could recommend a way a very lightweight MTA without network capabilities just for receiving local administration emails?I know I could restrict access, I was just wondering if there was something more lightweight designed purely for local use.
View 2 Replies View RelatedDoes anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies View RelatedI try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies View RelatedI installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
Can anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
View 1 Replies View RelatedI have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View Related