Currently i am using xampp in fedora 15 to develop php projects . my question is that i want to setup database server of my choice(MYSQL).when i gone to download mysql from their site. i got confused which to download and install. I need server edition of mysql to hold large amount of data...
View 3 RepliesI finally got Ubuntu server edition 10.4 LTS installed. But After the installation my computer boots and after the BIOS screen there is a blinking cursor and then the monitor says that there is no input.I am running a Dell Optiplex SX270, no modifications.
View 8 Replies View RelatedWhilst I have used GUI-based Linux distros for the last few years, I am now struggling somewhat when it comes to setting up a server from the command line. All the howto's I've read so far tell you how to set up certain things, but I don't know what I actually need to set up.Rather than asking the same questions all over again on a forum like this, and generally being a bit of a noob, I wonder if there's a resource somewhere that someone could direct me to in order to know what I need to do to set up a fileserver.
The hardware is all done, and I will probably set up a router distro like IpCop to manage the network, but I'm rather lost as to what packages I need, and how to know what the server is/isn't doing.I've used plenty of command lines in the past (ms dos, amiga dos, BASIC programming etc), just not a linux command line. All I've ever done is mount a few drives, use nmap and started x
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I am using CentOS5 and installed the MySQL for server during the installation. I can set up and use MySQL databases. But I cannot make it startup everytime the server restarts. And quite a lot of methods need this folder "support-files/mysql.server", while my set up cannot find this. I am wondering if my installation of the MySQL for server is complete or not.
View 4 Replies View RelatedIm getting this error when i try to run mysql from a shell
Code:
ERROR 2002 (HY0000): can't connect to local MySQL server through socket
I have installed MySQL over yum on fedora.
but the path and file /var/lib/mysql/mysql.sock does not exist on my system?
I've tried /etc/init.d/mysql start, and it actually starts, or at least, it doesn't error out. But when I do pgrep mysql I get nothing, and when I try to login with mysql -p as root, I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
None of my other logins work, either, but since pgrep mysql didn't work, it's clear that MySQL just isn't running. I tried uninstalling and reinstalling mysql-server via apt-get, but I get the same thing. The logs in /var/log/syslog show this:
Apr 11 14:31:26 /etc/init.d/mysql[9774]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed
Apr 11 14:31:26 /etc/init.d/mysql[9774]: error: 'Can't connect to local MySQL server
[code].....
We have 2 servers, 1 is the webserver and the other is the Mysql server.
When transfering a 2GB file from the webserver to the Mysql server.
The webserver's connection to the mysql DB server dies completely.
Need to restart the MYSQL process in order for it to come back online.
During this connection downtime, when using phpmyadmin on the mysql server shows no problem running queries etc.
Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
View 1 Replies View RelatedI have a RHEL5 machine having mysql5.0.22 is installed in it. i also installed java through "jdk-1_5_0_19-linux-i586.bin" package, and its version is 1.5.0_19. I am trying to check if any JDBC driver for Mysql Server is installed on my system . How can I do this? If any driver is already installed How can I get the file path for those driver files? is it comes along with jdk packages? As i am not a programmer, and does't know more about jdbc.
View 1 Replies View RelatedI tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
I have an e-mail production server that has been running fine for almost two years.
Notice mail was not serving today and login to a bunch of errors in messages
However, I think they are all from not being able to access MySQL and when I:
mysql -u root -p
I get:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
what the difference is between msql-server and mysql-community-server
View 5 Replies View RelatedI've just made my old, dusty computer into an Ubuntu Server. So far, i have installed a well functioned LAMP server, to host my Website. I have also installed a FTP-Server (proftpd) and i was wondering if i could manage my FTP accounts in MySQL so i could make an account creation page for it? If yes, how?
View 2 Replies View RelatedI like to run a mySql database server on a Ubuntu (which is no server) for local use only. Is there some instruction how to do this? I downloaded several DBMS but they all seem to assume a running server.
View 1 Replies View RelatedI would like to connect to a separate mysql server, yet I can't find any documentation on how to do this.How would one achieve this? I am running qmail on centos4.
View 3 Replies View RelatedI'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies View RelatedI have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View Relatedwhat is configure option of Mysql server from Centos repo? I mean configuration option used before compilation.
View 1 Replies View RelatedI am using CentOS5 and installed the MySQL for server during the installation. I can set up and use MySQL databases. But I cannot make it startup everytime the server restarts. And quite a lot of methods need this folder "support-files/mysql.server", while my set up cannot find this. I am wondering if my installation of the MySQL for server is complete or not.
View 3 Replies View RelatedI have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
i'm looking for a way to set up my Bukkit server (Minecraft) with a mysql server on Ubuntu 10.04LTS
View 1 Replies View Relatedmy mysql is hogging my server resources andd sometimes crash it.Is there a way to increase memory it uses?I get this message alot..
Time: Mon Dec 6 08:21:33 2010 -0600
Account: mysql
Resource: Virtual Memory Size
[code]....
I'm running Debian Testing and am confounded by a new problem.mysql -u root -p works great.mysql -u mythtv -p doesn't. This is a first for me.I did the usual as mysql root: mysql> create user 'mythtv'@'127.0.0.1' identified by 'mythtv';Query OK, 0 rows affected (0.01 sec)
mysql> grant all on *.* to 'mythtv'@'127.0.0.1';
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
[code]....
How can I use SSH to connect to my mysql server remotely? SSH connects on port xxxx, so do I need to forward ports in the putty connection?
View 4 Replies View Relatedi try to install mysql-server how do i create a password for it
yum install mysql mysql-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.optus.net
* updates: mirror.optus.net
[Code]...