Server :: Miniserv.conf Dont Exists After Installation?
Apr 24, 2011
im using centos 5.6, and successfully run apache and php. I try to install the webmin using yum install,...and it complete the installation.I chkconfig --list webmin on and service webmin start..[URL]When i look to /etc/webmin....this file dont exist?when I command ..... service webmin restart/etc/init.d/webmin: line 62: /etc/webmin/stop: No such file or directory/etc/init.d/webmin: line 62: /etc/webmin/start: No such file or directoryhow come? even though it completes the installation
View 1 Replies
ADVERTISEMENT
Apr 7, 2011
I am recently getting a very weird error on my Webmin. The result of this problem I suspect is I am no longer able to log into my Maia Mailguard which is my Spam Viewer.
Quote:[BEGIN failed--compilation aborted at (eval 17) line 1.
restarting miniserv
[06/Apr/2011:23:34:09 -0400] Restarting
[06/Apr/2011:23:34:10 -0400] miniserv.pl started
[06/Apr/2011:23:34:10 -0400] Perl module Authen::PAM needed for PAM is not installed : Can't locate Authen/PAM.pm in @INC (@INC contains: /usr/libexec/webmin /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 17) line 1.
BEGIN failed--compilation aborted at (eval 17) line 1.
Failed to initialize SSL connection
Failed to initialize SSL connection
View 3 Replies
View Related
Feb 12, 2011
I get this warning when running rkhunter:The file rkhunter.cond foes not exist on the system, but it is present in the rkhunter.dat file.However, the conf file does exist as I just edited it.Any ideas on why this error occurs?[root#] locate rkhunter.conf/etc/rkhunter.conf
View 15 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Mar 22, 2011
I have configured heartbeat+DRBD on a SLES10 SP3 cluster and that's working fine except when both nodes are down and I turn on only one node. When this happens, the heartbeat don't starts automatically (the service status says it's unused, so the services, IP address and partition don't start automatically too).
I can turn on the heartbeat manually (service heartbeat start) and get the services, ip address and partition initialized too, but I'd like to make it starts automatically because it's possible to have one node broken and the person that will turn on the other node can forget to manually starts the service.
-When the heartbeat is unused on the first node and I turn on the second node, the heartbeat on the first node starts automatically and everything is fine.
-The command "chkconfig heartbeat on" was executed.
View 6 Replies
View Related
Mar 3, 2010
Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.
View 2 Replies
View Related
Aug 20, 2010
I am setting up LDAP server, i set slapd.conf(dc=proldap,dc=com) and start ldap it is OK but when i check using ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts result is : namingContexts: dc=my-domain,dc=com
it seems that it did not use my slapd.conf so i tried removing my slapd.conf from /etc/openldap and start slapd again and it did start with no errors. and when i do ldapsearch again still uses dc=my-domain,dc=com
I tried searching about this in google and found no answers,
my reference in setting up ldap is the link below. but it seemed that it always uses another configuration not the one i modified
I'm using Fedora12, ldap version 2.4.19. i installed ldap by yum install url
url
View 12 Replies
View Related
May 17, 2010
I am trying to install Ubuntu LTS 10.04 on an IBM Lenovo T61 Thinkpad notebook with Windows 7 preinstalled on it. There were two hard drives one 30 GB and other almost 110 GB which (the second one) I resized in three partitions with the help of Windows 7 disk management. Now when I try to install Ubuntu, the partition manager doesn't recognize the newly created partitions it only shows 2 partitions C: and old 100+ GB D:. I had created a separate partition for Ubuntu also but I can't see it so can't install Ubuntu on it, I can't resize the visible partition because it is divided into three actually and I have data on each of three.
View 5 Replies
View Related
Jul 24, 2009
I tried Fedora 11 Live CD and if finds and I am able to connect to my wireless network imediately. But now when I have installed Fedora to the hard drive, I can see the wireless network, but when I press connect, it starts connecting, both dots become green but then it just says "Disconnected, the wireless network has been disconnected"
View 1 Replies
View Related
Apr 14, 2011
I am using CentOS 5.6 with Apache 2.2.17. The Apache was compiled from source using RPM build to comply with PCI requirements. Also Plesk 9.3 is used as a control panel, but other than the config files the Apache is pretty standard. When the httpd is started, there are no errors reported in /var/log/messages or in the error_log, and the httpd starts, shows up in ps and the pid file exists in /var/run/httpd.pid.
However when you check the status 'service httpd status' you get 'httpd dead but subsys locked'. You can add websites normally, and the proper config files are generated so I am pretty sure this isn't a control panel issue as I have other servers running the same control panel and Apache 2.2.16 compiled and installed the same way as the 2.2.17 and there are no problems.
View 1 Replies
View Related
Jun 6, 2009
I'm running CentOS 5.3 64bit and from the get go I've had problems with the Apache server.More specifically, on what seems to be a random occurance, the apache server stops to respond.The process is still running, but nothing happens with it, and it is not responding.The /var/logs/httpd/error_log is blank for the occurance and only shows an entry after I give it a restart.So I'm a bit confused about what is going on.With that said, I need to make sure the httpd is working one way or another.I don't want to force a restart service every 10 minutes as this seems a bit too much.However, I do want to have the following:
run a crond every minute to do:If it fails, then do service httpd restart (and log the failure and restart to a file and email me a message).Any pointers on how to do that?It ain't the pretty solution, but it will save me from a very angry user until I'll figure what is the real cause for this failure.
View 5 Replies
View Related
Dec 18, 2010
I am trying to install ubuntu 9.04 in a desktop but when loading the first screen it appears a box writing somthing "vmlifuz" the only choose that have is "ok" when i am hit button "ok" does not working, if a press it again (when the box with the ok disappears) load the dialog saying "Try ubuntu" , "install ubuntu" etc. Then if a hit one of this the dialog comes again saying something about "live-install" i hit ok but this time not process in the installation. After that I had try to intall windows xp but when go to load kernal prompt a message could not load a setupdd.sys. I had try to install Linux mint after the starting screen says ready and then nothing , i had try to install fedora only running the cd without even a message only a black screen. At last i had install ubuntu to another pc and i took the hard disk and plug it to this one, when i power on the pc after bios info in the screen come this "grub rescue>"
View 3 Replies
View Related
Jan 17, 2011
I am new to scripting, would like to have a script that tests whether a directory exists on remote host & display the message accordingly. The remote hostname can be provided by means of file containing list of hostnames. Can use rsh for connecting to remote host.I tried with couple of scripts by searching google but didn't get desired result. Please help me, below is my efforts, $file contains list of hostnames.
View 10 Replies
View Related
Apr 11, 2011
status is httpd dead but pid file exists ang logged caught SIGTERM, shutting down.
View 1 Replies
View Related
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
View Related
Aug 12, 2010
I updated Lucid yesterday, and when I restarted the user interface was changed to a more simple feeling display. This makes me think I'm stuck in a "basic" mode or something. I attached a screen shot, but to give you an idea ill describe some issues. For one thing the minimize buttons are now on the right. The volume control, which used to appear on the top right of the screen, is gone and my multimedia volume control buttons on my Inspiron 1420 no longer work. Furthermore, the command terminal is now white and the keyboard shortcuts for copy and past don't work.
Immediately after updating I also got an error message at login (which also appears different and gives options on bottom of screen like gnome Failsafe) which said something like "gnome default power management installed incorrectly...". I followed the advice of a forum thread that involved the purge command and that seemed to remedy that message.
View 1 Replies
View Related
Mar 3, 2011
My kernel is not updating and I'm getting errors like.........
[Code]...
View 6 Replies
View Related
Dec 1, 2010
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies
View Related
Aug 4, 2011
If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies
View Related
Feb 21, 2010
I'll preface this by saying i'm by no means an expert on Linux. A competant beginner at most.We have a dedicated server, the 'resolv.conf' was changed, specifically the domain that was listed (this is the primary domain).I only became aware of this change, when we get into work on Friday and all our sites were down - I attributed this to DNS fault as if I changed my host file (I work on a windows machine) and specifically routed to the domains to the correct IP address, the websites were served fine.I tracked down the resolv.conf change by quizzing a collegue. I then switched the resolv.conf file back to it's original state - luckily a backup was made so I am 100% sure that the current resolv.conf is the correct one.
change was made Friday morning, around 9.30am (UK time). It is now 5.05pm (UK time). The original change was made sometime on Weds afternoon, and the sites stopped serving between Thursday night and Friday morning.Does anyone have any idea how long it should take for the fix to be picked up? Will it be picked up? I just started to think that the change can't be picked up due to some DNS related voodoo.
View 4 Replies
View Related
Sep 17, 2010
I want to know if the file "named.stats" exists in bind9 under solaris 5.8?
View 1 Replies
View Related
Jul 13, 2010
can anyone tell me what is the difference between these two files of LDAP client /etc/ldap.conf and /etc/ldap/ldap.conf and for what purposes these two files gives services. Is it necessary to have these two files at a time ?
I use these files to install LDAP client to authenticate with our LDAP server by creating a symbolic link of /etc/ldap.conf to /etc/ldap/ldap.conf.
View 8 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Sep 20, 2010
The thing is, I've created a new local zone here (called "local.lan"), and, aparently, it is working fine, and DHCP3-SERVER is updating DNS info through the controls.But sometimes I get some strange answers from the server, like when I do the "arp" command in one of the clients, and get the server's hostname "mixed" with it's own reverse, like this: "dns.local.lan.2.168. | ether | 00:02:1e:f5:61:74 | C | eth0". Other thing is that sometimes my DNS don't update when a computer "enters" the lan. In the /var/log/syslog the DHCPOFFER appears, but the information about the DNS update isn't there.So, I would like to show you my named.conf file and my local zone db file, and get some feedback from you (what would you change... what is wrong...).
# ------------------- #
* named.conf:
# ------------------- #
[code]....
View 17 Replies
View Related
Jan 10, 2011
I am having a situation where I do not have DNS server (the person who has that is not me) for a few websites which are running on a reverse proxy. I recently after having a long trouble shooting hours found that my proxy pass entries look as follows
Code:
ProxyPass /app1 http://192.168.1.3:8080/app1
ProxyPass / http://192.168.1.3
ProxyPassReverse /app1 http://192.168.1.3:8080/app1
ProxyPassReverse / http://192.168.1.3
If I use the entries as above then some one from internet is able to access the sites.But from within LAN people are unable to access it.
How ever if I use
Code:
ProxyPass /app1 http://site1.myserver.com:8080/app1
ProxyPass / http://site1.myserver.com
ProxyPassReverse /app1 http://site1.myserver.com:8080/app1
ProxyPassReverse / http://site1.myserver.com
then things work on LAN but from internet it is not accessible.What can be a solution in this case will putting things in resolv.conf do?
View 7 Replies
View Related
Mar 11, 2010
While configuring dhcpd.conf on centos 4 I couldn't find option to reserve that ip addresses. I have subnet of 10.0.0.0 network of which i want reserve 1 - 50 addresses for my servers. I'll assign static ips to my servers & printers.
[Code]...
View 6 Replies
View Related
Jan 20, 2010
Like in the subject. Does anyone knows how to do it without restart
View 1 Replies
View Related
Jan 11, 2010
Is there any way to associate a group to subnet in dhcpd.conf? I want hosts in a specific group to be locked to an IP range defined in subnet. Something like this:
Code:
authoritative;
ddns-update-style ad-hoc;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.1 192.168.0.100;
option blah1;
[Code]...
View 1 Replies
View Related
Apr 3, 2011
I'm trying to set up samba. I am editing the smb.conf.master file, and then using the testparm -s "smb.conf.master > smb.conf" command to make the smb.conf file. I am running this command as root. However, the smb.conf is not updating with the changes I am making. Does anyone know why? It just stays the same no matter what I change. The only way to change it is to edit the smb.conf file itself.
View 1 Replies
View Related
