I really not successed to install Bind, I installed Rhl9, After installation, i want to confirm the name server using dig command also, prob to use dig command with different option
View 1 Replies
I have read a lot of documentation but it is still hard to find a proper answer to my doubts.About the hostnames in a domain, how is it associate to a determinated port?
For example, when I type on the browser webmail.sparc86.net and then I get redirected to the port of 20000 of this same domain. Fine, but how does it work that it knows it should be redirected to the port 20000? From where is this information (the association webmail-port 20000) taken? The apache will manage this, right? But what about other services like ftp?Another example, If I wrote my own software listening, let's say on the port 40000 and I want to have a domain like "mystuff.sparc86.net" how would I let it be redirected to the port 40000 ?
What is the best IPtables configuration for bind DNS server.
View 3 Replies View Relatedwhat is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedI have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
I have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies View RelatedI am trying to set up a static IP for the pi.
Code: Select allcat /etc/network/interfaces
this should bring up something like iface eth0 inet dhcp
I installed RHEL 6 Beta 2 on ESX box and found that network is to be manually started through ifup command.
View 6 Replies View RelatedI am in the midst of upgrading my F11 computer to F13. I have run PreUpgrade, and the files have downloaded, it's restarted and now it's asking me to do the Manual TCP/IP Configuration. I have only enabled IPV4. It's asking for the following info (which I can't seem to get right)
[Code]....
The IP I want the computer to have is 192.168.0.5, my router is 192.168.0.1, my subnet is 255.255.255.0 I don't know what the Name server is for. Do I need to put the above into into any of the fields above? I've tried a few times but with no luck.
I am trying to manually configure my wireless interface similar to how I manually configure my wired interfaces on Ubuntu 10.10 (Maverick Meerkat). I have two wired interfaces that use static IP addresses. I set up these interfaces using /etc/network/interface file. I disabled network manager (it was never working correctly to start with). Now, I want to connect my wireless interface (wlan0) to an unsecured wireless private network. I know/can find out all the information about the wireless network (ssid, etc). Also, I need to do this without disconnecting either of my wired interfaces.
I have looked all over the internet/forums for information about how to set up this interface, but nothing I found meets my need. Is there any way I can use iwconfig or the interface file to connect to this wireless connection? Or is there any other tool that will allow me to manually do this?
From where I can download Openswan for my RHEL 5. Please if possible, give me installation and configuration manual.
View 3 Replies View RelatedUbuntu @ Powerbook G4 400mhz
What's about:
I'm trying to install Ubuntu (or lubuntu) to this old Powerbook [URL] with 400mhz PPC CPU. I got it instslled and can use the terminal, but can't get the xserver running! The problem is the display is verey sensitiv with correct resulution and frequency, if it is not OK, it will not show enything (well, some colors like northern lights but nothing else ) I can login using the keyboard and hear the logon sound of gnome. but of cause i cant see anything I got no external monitor for testing.
Now the big question: how can i setup the grafic card in the actuel version of ubuntu? here i found some info, but it's not working anymore with 10.10 [URL]
here i found the following datas for the screen:
resolution: 1152x768horizontal
31-46 vertikal
50-70
Creating a separate /tmp partition manually during install prevents a clean shutdown.
Setup: Debian 8 minimal server configuration (SSH only) using net install as virtual machine on Windows Server 2012 R2 Hyper-V (Gen 2).
1024 MB RAM, 20 GB VHDX, and 1 Processor, EFI boot
Packages installed: openssh-server, sudo, unattended-upgrades, bsd-mailx postfix
Application: IPv6 gateway using 6in4 tunnel
Symptoms: When shutting down the operating system (poweroff or reboot), the message
A start job is running for Unattended-Upgrades ( xx seconds / no limit ).is displayed on the console and will persist for several minutes before eventually timing out and shutting down.I've tried several different configurations. Any configuration that creates /tmp automatically (whole disk with single partition, or disk with separate /home, /var, and /tmp partitions) works fine and shuts down promptly. When I partition the disk manually (512 MB EFI Boot, 17 GB /, 3 GB /var, 512 MB /tmp, and 512+ swap) the problem occurs. I've narrowed it down to just the /tmp partition by testing and comparing various configurations (including/excluding partitions, placing partitions on a separate disk, changing the partition sizes, matching against automatic configurations, etc.).
I have also compared the /etc/fstab and /etc/default/tmpfs configuration file between working and non-working systems and cannot see any meaningful difference.
Installed OpenSUSE 11.4 with XFCE on MSI Wind U90. Unfortunately my RTL8187se buit-in wi-fi doesn't work.Finally found that driver r8180 works. After YAST2 configuration it worked, but after reboot stopped working. I've found that YAST2 forgets my manual configuration of the wifi card (forgets all settings).I've tried to remove card from YAST2 and configure again from scratch, but it forgets all my settings - mainly the module name - r8180, and without this driver network doesn't work!
View 3 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedI have decided to try to run a web server, with a view to possibly, eventually, hosting my own website.To test the water I downloaded ClearOS and SME Server with a view to installing on a spare partition and trying them out.But, both installers seem to require the whole HDD to install into. Both installers have a warning saying that all partitions and drives attached to the PC will be erased in order to 'initialise' the HDD.
I must've installed 100 linux distros and i've never seen this before, including CentOS 5.5, which ClearOS is based on.Why is this the case? Is there any way I can install alongside another linux installation?? I have tried vbox but it doesn't offer a proper sandbox really as there is only one NIC.
why but on one of my boxes I am having trouble adding a new zone with the BIND Configuration GUI. When I click New->Zone, it'd pop up a long form for me to fill out various things like .....
Cache Time To Live
Authoritative Name Server
Responsible Person E-mail
etc
I notice that on the working box, it'd populate the output of the "hostname" command onto the "Authoritative Name Server" field. However, on the box that doesn't allow me to add new zones, it uses something like localhost.
I am trying to install Bind 9.3.6 - P1 on OEL 5 Update 4 which is running on Oracle VM Server as Oracle Template OVM_EL5U4_X86_PVM_4GB
Requirement :
We have two different domains
1. abc.com
2. abc.co.in
Some of the Servers are in :
abc.com
xyz.abc.com def.abc.com
... and more
code....
When I tried creating DNS Server : Dig worked on the server but when i am giving the IP of the DNS Server on another machine it cannot resolve any IP or Internet Address
Giving the following Messege on nslookup
DNS request time out
timeout was 2 seconds
***'Cant find server name for the address 192.168.1.x : Time Out
***Default Servers are not available
Default Server - Unkwoun
Address : 192.168.1.x
i have hosted a web server on cent os 5.6.i need to write the rules for that server.1. 1st how can i flush the iptables ?
i used this command
iptables -F
iptables -X
[code]...
Is it possible to configure Apache with password security (AuthConfig), yet allow certain IP addresses access without being prompted for a password?
View 3 Replies View RelatedI want to migrate to bind 9.10 in debian wheezy. I don't want to take the source code from debian Sid since its an experimental version. So I have taken source code from official bind forum and compiled in debian wheezy. The compilation is successful but I am having problem in running the binary in debian wheezy. It's not honoring the binary even though I run it. I am not getting error messages on console but still it is not running.
I want to know whether its feasible to do this Or is it dependent on any other system libraries to make it run ?
Last few lines from Strace Dump
==============================
capget(0x20080522, 0, NULL) = 0
capget(0x20080522, 0, {0, CAP_CHOWN|CAP_DAC_READ_SEARCH|CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_SYS_CHROOT|CAP_SYS_RESOURCE, 0}) = 0
getuid() = 1007
[Code] .....
Is is possible, via iptables or something similar, to bind a service running on a specific port to a specific interface? My case: I use a VPN service for privacy. I would like to have all traffic except ftp and ssh to run over tun0. Ports 21 and 22 will need to be accessible to the outside world (eth0) while the VPN is running.
View 3 Replies View RelatedDHCP I have working, so is BIND.
I'm trying to get dynamic dns working and am having issues
I suspect this maybe a chroot issue.
I've tried to follow the chroot advise within the wiki for Bind but no joy.
I had installed BIND packages but /etc/named.conf file is missing as the packages are shown,
[root@nisserver ~]# yum list bind*
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
[code]...
a zone file (db.example.edu.br) starts like this:
Code:
; BIND version named 8.4.6-REL-NOESW Tue Jan 25 19:11:36 UTC 2005
; BIND version lamont@mix:/build/lamont/bind-8.4.6/src/bin/named
; zone 'example.edu.br' last serial 200806011
; from [201.138.35.4].53 (local [201.138.35.15].51183) using AXFR at Wed Mar 12 18:44:01 2008
; NOT TSIG verified
[Code]...
uname
Linux cam01 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) i686 GNU/Linux
debian_version
8.0
I have three webcams and after reboot they change their /dev/videoX names from time to time.
My attempt to add .rules file to /etc/udev/rules.d was unsuccessful.
Code: Select allSUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4EE37780", SYMLINK+="video10"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4B2AC690", SYMLINK+="video11"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="HD_WebCam_HD_WebCam", SYMLINK+="video12"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="046d_0825_4EE37780", SYMLINK+="mvideo10"
ATTRS{ID_SERIAL}=="046d_0825_4B2AC690", SYMLINK+="mvideo11"
SUBSYSTEM=="video4linux", ATTRS{ID_SERIAL}=="HD_WebCam_HD_WebCam", SYMLINK+="mvideo12"
Years ago I was able to set this up, but my old method has become obsolete. How do you do it today with Ubuntu 10.10?I want:* A VNC server always running* The server should start at boot time* The user should come to the login screen of ubuntu and need to loginI have Googled, but there are so many versions of this and none of those I tried solve all of the above requirements.
View 4 Replies View RelatedI have installed Canon ImageRunner 2018i on my linux box using CUPS web interface. When I try to install this as a network printer from a Windows XP machine, the windows XP machine keeps asking me for a device driver. Is there a way to configure the printer on CUPS/Samba so that when I try to install it on Windows XP machine as a network printer, it does not ask me for a device driver?
View 7 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies View Related
