Server :: Install Dig Command On Laptop?
Jan 18, 2010I just install linux on my laptop(mandriva 2010) trying to use it to keep my server remotely but I notice that I do not have some commands that I used to use, one of them "dig".
View 2 RepliesI just install linux on my laptop(mandriva 2010) trying to use it to keep my server remotely but I notice that I do not have some commands that I used to use, one of them "dig".
View 2 RepliesI am trying to create a server on my laptop. I have a windows 7 OS. I have downloaded Apache HTTP Server, MySQL Server and PHP. My Apache seems to be working well at one point i.e., when I use the http://localhost "It Works" does show in the browser. When I attempt to sign on the MySQL Server with my password the command prompt shuts off so quick I can't even read what the window says. The MySQL server seems to be running in the task manager under mysqld.exe.
End goal: have mysql running and adn communicating with php on apache.
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View Relatedcan i install a ssh server to ssh into someones computer if they have a laptop since the ip would be changing somewhat often?
View 1 Replies View RelatedI tried installing RHEL5 server edition in my laptop and it couldnt detect the video card and so the installation continued in the blue screen and i didnt get the usual GUI for installation so i discontinued the installation.can anyone help me how to i install this.Pls i am in need of RHEL in my laptop.
View 3 Replies View RelatedI have a linux server in a remote location. I have access to it only via putty. How do I install GUI on the linux server and view the GUI on my windows laptop?I installed KDE and when I type startx I get errors.
View 3 Replies View RelatedI'm trying to install Fedora 14 on my netbook using a network PXE server on my laptop. I can see in the syslog, that initrd.img and vmlinuz get sent over tftp. The problem seems to be in my kernel parameters:
LABEL fedora14-EFI-boot-i386
kernel /images/fedora14-EFI-boot-i386/vmlinuz0
MENU LABEL fedora14-EFI-boot-i386
append initrd=/images/fedora14-EFI-boot-i386/initrd0.img ksdevice=bootif lang= kssendmac text ks=http://192.168.2.1/cblr/svc/op/ks/profile/fedora14-EFI-boot-i386 selinux=0
ipappend 2
On booting up the netbook it can't find a root device. I'm not sure what to specify for the root= because I have deleted all the partitions on /dev/sda. I did this because originally it kept booting up the old OS, and I assumed there was a way to format the disk as part of the install. I'm stuck now and was hoping someone with more experience of bootloaders might be able to help. If possible I'd like to do this using the network rather than a usb.
I have a Toshiba A205 S5804 laptop that had Vista Home Premium installed. Tried to install Centos 5 (2.6.18-8-el5) and when I went through the install process, X Server failed to start so I had to go thorough the command line install. Once the install completed, it only booted to console.
The default resolution for this laptop is 1280X800 but I dont know if that is why or not. if anyone has a clue about my issue, please let me know.. I really dont want to install windows.
I wish to use my laptop to create a system for my Soekris 4801. I don't want to take the server down for the lengthy install ( took 6 hours last time, Fedora 5 ). I want to create the image on a USB drive for the 586 Soekris server on my 686 HP laptop. Then scp the image to the Soekris and reboot and configure the server.
View 3 Replies View RelatedI need to install a command line server without gui and smallest as possible Is there a option on installer to obtain a minimal server?
View 4 Replies View RelatedI am trying to install webmin on my server(9.10) by command line
what is the command to see if it is installed or not
I am trying to install a printer server in the command line.
Does anyone know of good tutorials? or could explain it to me.
I already have cups installed. I just need to install the correct driver which is the Canon MP180 and set it to share.
I am experiencing difficulty in installing BABYftp server. I have cpp source code downloaded from net. I am following the instructions in readme file. The command to run is autoconf && ./configure && make
but it is giving me error (last four lines) as-
checking security/pam_appl.h usability... no
checking security/pam_appl.h presence... no
checking for security/pam_appl.h... no
configure: error: PAM headers not found.
Why is such error occuring?
Also is there any command like sudo apt-get install <package_name> for babyftp?
I'm using a webhosting server running CentOS, and I'm trying to install GCC to compile Java on the server. Since I'm new to Linux and don't have root privileges, I'm having trouble installing this. I need to install this using command-line. I don't know if I should compile from source (which I downloaded off the "gcc.gnu.org" website) or if I need to install a binary or something. Can I even install anything without root privileges?
View 9 Replies View RelatedMy company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies View RelatedI've accidentally changed /usr/bin/php file on my server by running a cp command. I know this is bad, i just don't know how bad. Everything is working fine (websites using php), so i just wanted to know what this action could cause and also how can i restore original content.
View 4 Replies View RelatedI would like to install and manage SQUID Proxy Server using command line in Ubuntu 10.04 Server.
View 1 Replies View RelatedWhat is the command to manage the power from my laptop.
View 1 Replies View RelatedI would like to be able to suspend to disk or Ram from the command line. I can do it with the package 'hibernate' which works well, but it needs to be run as root:
Code:
Do you know if there is any way that I can make this script run by normal users?
I am using a minimal version of 9.04 with openbox.
I'm running Fedora 10 [KDE] on an Acer laptop and am having problems configuring "hot keys" for it. First thing that needs to be mentioned is that the hotkeys used to work when I was running it on Gnome without me having to do anything. I assumed that this will be the case with KDE too. In any case, I think driver installation is supposed to be quite straight forward. There are two packages: acer_acpi and acerhk and different installation instructions for each one of them. The problem I am having is when I run the makefile script for either one of these, I get the following output in the terminal:
Quote:
Makefile: line 5: KERNELSRC?=/lib/modules/2.6.27.9-159.fc10.x86_64/build: No such file or directory
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: shell: command not found
Makefile: line 6: shell: command not found
Makefile: line 8: KERNELVERSION: command not found
[Code].....
I think build-essential and some other packages are normally needed, but since you can't get them for Fedora (?), I groupinstalled "Development Tools" and some other group.
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies View Relatedi want to disable the su command on a server so that users cant run the su command i removed the comment from the 3 and 5 line in /etc/pam.d/su file but it doesnt seem to work the file is shown below
#%PAM-1.0
auth sufficient pam_rootok.so
# Uncomment the following line to implicitly trust users in the "wheel" group.
[code]....
I am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
View 2 Replies View Relatedi want to install wine on rhel 5.plz send me wine installtion command.
View 1 Replies View RelatedI am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
I was having so much trouble with ubuntu 8.04 that I deleted off my computer and did a fresh install of 9.10. I downloaded the 64 bit iso from the internet, burned it to a disc and installed it. When it asked if it should be the server version I thought I said no. Now when I boot it only boots to the server version and all I get is command line. Can I get out of this and get my regular ubuntu screen back or did I install the wrong version?
View 6 Replies View RelatedI am not seeing what i am doing wrong here, but here goes:
From my server I need to run a command for backup on 25 remote servers (through a script). Now I have pushed the public keys for remote ssh connectivity on all of them and it works ( I can push files using rsync without the need to enter passwords on the remote servers), howver, I need to run the following command:
ssh odsadmin@10.139.111.1 'cp -a /var/www/life /var/www/life-v4'
when I run this command, I keep getting asked to enter the password, I even tried putting sudo in front of the cp, but still get the request to enter the password.
I am unable to use ncftp command I have defined all variables used. i have to copy the data to another server FTPS. When i am executing this command it is throwing error
ncftp -u : option unknown
I am copying total script what i am executing in my server. Please some one tell me is there any pistake in using the ncftp command , or tell me some other commands to copy data to remote server
BAK="/opt/DBbackups"
NOW=$(date +"%d-%m-%Y")
FTPU="username"
FTPP="password"
[code]....
we are synchronizing server time with ntpdate command in cron.how often should it run?
View 3 Replies View RelatedIn oreder to run an application software on RHEL 3 ES server, I created a link forcefully using following command from root id:
# cd /lib64/tls/
# ln -sf libc-2.3.4.so libc.so.6
before that I copied file libc-2.3.4.so from a workstation with OS RHEL 4 WS so that a link can be created.
Now I am unable to run any command except cd & pwd and it gives error messaage as given below:
ls:relocation error:/lib64/tls/libc.so.6:symbol _rtld_global_ro,version GLIBC_PRIVATE not defined in file ld-linux-x86-64.so.2with link time reference.
Before running this command libc.so.6 was pointing to libc-2.3.so file in path /lib64/libc-2.3.2.so.
I am now unable even to open a new window on the server.Please send me some solution as early as possible because this server is running production data and many users are runnig application on this server.