right i wouldn't ask without searching first but i didn't find a full guide on how to setup an irc server including hosting it on a irc.*.com sub-domain and including things like chanserv
View 3 Replies
I am once again trying to get a fully functional desktop at work without a dual boot setup. One issue is file searching. I have looked at beagle, tracker and Google Desktop. I am currently testing Google Desktop and it appears to work well, but it is not integrated into nautilus and it appears to not index my email in evolution that is accessed via an exchange server.
Beagle appears dead. Tracker looks promising, but I can't tell if it integrates into Nautilus currently without rebuilding Nautilus. If you use Tracker, can you tell me how it works with Nautilus, mapped cifs drives on windows servers and evolution in exchange mode. Also, the current version of tracker is 0.10.6, but on 10.04 only 0.6.X is available and Natty looks poised to ship with 0.8.X. Is there any advantage to compiling it? Are there Ubuntu specific tweaks that are lost if you go with source?
Using Debian Lenny I'm getting the following message in my mail: /etc/cron.daily/logrotate:
Quote:
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
I get the following error while starting apache httpd
Code: httpd: Could not determine the server's fully qualified domain name, using <Server's-ip-address> for ServerName I googled it and have come across the following solutions, all of them involve changing the ServerName setting in httpd.conf:ServerName localhost ServerName www.example.com:80 ServerName <ip-address-of-server> ServerName <hostname-of-machine/FQDN>
I am setting up httpd to be accessed from over a LAN, so i don't have a .com domain name. I am thinking of going with the first option, it seems to be working...
I have been working on NTP to find out resolution of my issues unable to find. let me briefly explain here. I have three servers and no server is fully synced with remote NTP server.I don't know why it sync time alternatively with remote NTP server and LOCAL whereas there is not issue in connectivity/reachability of NTP server and NTP clients. Also server 1 reporting kernel time sync disabled 0001.
View 6 Replies View RelatedI'm trying to fully automate a Minecraft server, and I decided to use Ubuntu 11.04 on this computer. The computer I'm using for it is an old computer (it's the old family PC, it's about 5 years old (and running amazingly now that I've formatted the hard drive (compared to how it used to run))) so it won't run the Unix environment (or something like that) and runs the Gnome environment instead.
Anyways; the server auto-starts when my computer turns on (my computer also automatically turns on). Now all I need to do is have my computer auto-shutdown at 12:00AM as well as enter the command "stop" into the running terminal. I plan to later add more commands (such as automatically welcoming people to the server when they connect, but that's not important right now and I'll likely be able to figure out if I can get this working).
This is the command I'm using to shutdown the computer:
sudo shutdown -P 24:00
However, it doesn't work. First of all, I need to enter my password, so I need some way to have the shell file enter my password for me whenever the terminal asks for it. Second of all, it just plan doesn't work, even if I enter my password (like, the countdown doesn't appear). As for entering commands into the terminal, the only way I can think of is:echo "stop" But the problem is that doesn't work because it wont enter into the running terminal (and I don't know how to do that).
I am getting this
[root@ncc1701 ~]# hostname
ncc1701
[root@ncc1701 ~]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 63.123.155.104 for ServerName
[ OK ]
problem is that I have no idea where it is getting the 63.123.155.104 address from. Its not mine and its not the IP of the server..
I decided that I'd torture myself and try to get a server up and running with SELinux fully enabled. I so far have figured out virtual hosting, vsftpd, and SSH to work with it nicely, but I can't figure out what to do to get AWstats to be viewable through a browser with SELinux enabled. This is what I get from /var/log/messages:
Code:
Mar 19 15:09:34 localhost kernel: type=1400 audit(1237496974.987:69): avc: denied { getattr } for pid=4769 comm="httpd" path="/usr/share/awstats/wwwroot/cgi-bin/awstats.pl" dev=sda1 ino=1267968 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=system_u:object_r:httpd_awstats_script_exec_t:s0 tclass=file
Mar 19 15:09:34 localhost kernel: type=1400 audit(1237496974.987:70): avc: denied { getattr } for pid=4769 comm="httpd" path="/usr/share/awstats/wwwroot/cgi-bin/awstats.pl" dev=sda1 ino=1267968 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=system_u:object_r:httpd_awstats_script_exec_t:s0 tclass=file
Could someone explain to me what I should be looking for in these messages? Or what I would need to do to fix it?
I am facing an error:"Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using TestServer.localdomain.com for ServerName"When I am restarting the httpd service.Can anyone please tell me what is this error about & how to fix it.bare with me as I am a newbie, so kindly requesting for the easy explanation.steps to set the Domain name.
View 1 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View RelatedHow to setup a SMS server using Linux, also want to know the appropriate Linux distribution to setup a SMS server.
View 2 Replies View RelatedI have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies View RelatedI'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedIs it possible to somehow setup an ssh server that doesn't require a username,password or cert to login?I wish to provide shell access to a console program, which will prompt for a username and password.Encryption is essential though, and users must not be able to snoop in on each other
View 9 Replies View RelatedIf you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies View RelatedI have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
I want to set up moodle and need to give my computer some capability to act as a server. I am following the steps at [URL] although my question is not really related to moodle. Here is the problem: setting everything up to make my computer accessible from outside has worked so far. I got myself a static IP address using a dynamic dns server and can ssh into my computer from any other computer connected to the www. So,
[Code]....
How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
View 1 Replies View Relatedhow i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
View 4 Replies View RelatedI need to setup a Linux VPN server at work for resources' sharing, I currently have a server running CentOS 5.4, and tried endless tutorials on the web, but to no avail, and can't find where the logs are kept for the VPN server to check where the error is. But all my attempts to try to connect keep failing.
View 9 Replies View RelatedI have a few friends that have seen me bypass firewalls with a socks proxy (SSH). I explained on how it works and how secure it is for browsing the Internet and checking your email in public places. I had at least 6 asked me if I could set up an account on my server for them and they would pay me! Now what I wanted to know was how I can set this up in a server and website where they can register an account and pay me through PayPal! I don't need help setting up the site! Just on how to set up the server to automate this. What tools are needed (ex. ISPConfig, jailkit.... stuff like that?) I don't mind doing this manually but if I get more people that would like this I don't really want to do every single one.
View 1 Replies View RelatedHow can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replies View RelatedI am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
I'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.
Is it possible to do this with no router and only a DSL ISP connection?
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
We currently have a SUSE Apache2 reverse proxy server setup to reverse proxy (proxy_mod) our GroupWise Web Access server. Our SUSE box is located at www.domain.com. Our GroupWise Web Access server is located internally and is called GWMail. We are in the process of migrating from Novell to Windows, so we will have an exchange server with OWA access running on a Windows Server 2008 IIS7 box. That one will be called EXMail internally. Right now when someone goes to www.domain.com/gw/webacc it goes to the GWMail internal server from the outside world. This was all set up by previous techs who used Linux more.
We would like to set up reverse proxy to be able to reverse proxy to the Exchange Server from the outside world. Unfortunately the snag we are running into is that Exchange needs to run on port 443, and forwarding to port 443 has been a little tricky. I've read elsewhere we need to implement a generic TCP proxy, such as IPtables. what we need to do to get our SUSU Apache2 server to be able to reverse proxy to our Exchange server on port 443. For the save of argument lets call our SUSE server ExtranetServer. Below is our default-configuration.conf file's configuration:
[Code]....
What is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedI am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
