Server :: Get A Copy Of A Script To Unable To Make One Or Point To Instructions?

Aug 16, 2010

I'm having a few problems with setting up my server i'v found that QBittorrent is my best option especially with its -nox feature however i'm at a lose for setting up a service script for /ect/ini.d/ so i can run it as a deamon, does anyone know where i can get a copy of a script to do it or is somone able to make one or point me to instructions on how to make one somewhere.

View 1 Replies


ADVERTISEMENT

General :: Make RDM Available As Mount Point On Server?

Aug 23, 2010

I built a Suse Linux server on vmware. I attached an RDM to the server and can now see the drive as a "Mass Storage Drive" in Applications - computer. When I double click on the icon, I get an error message that indicates that the drive can not be mounted. I tried to mount in gnome terminal using: mount /dev/sdb and get "can't find .dev/sdb in /etc/fstab or /etc/mtab". I tried adding device that I would like to mount to fstab, but don't think I have the settings correct. I looking for any info that might step me through the process.

View 2 Replies View Related

Ubuntu :: Unable To Restore GRUB Using Instructions?

Nov 10, 2010

I have a dual boot system with Ubuntu 10.10 and Windows Vista. Today I upgraded Vista to Windows 7, and GRUB is no longer working. The usual problem, I know. Searched forums & Web and found many instructions for restoring GRUB manually or by using the Ubuntu Live CD.I tried the Live CD first. All the instructions say to boot to the CD, open a terminal, and enter: sudo grubI get an error message: command not found.Then I tried the manual method, which (after mounting the relevant partition) includes the instructions:

Reinstall the boot manager by typing "sudo grub-install --root-directory=/mnt/ /dev/sdX", replacing "X" with the Ubuntu drive's letter, and then hitting "Enter." For example, "/dev/sda" is the Ubuntu drive for most users.[This step appeared to work fine.]Then: Restart the computer into your Ubuntu system.Alas, the computer restarts to sh:grub and I don't know how to get from there to either Linux or Windows, or what to do to fix this problem. At this point I have no working system on that computer

View 9 Replies View Related

Ubuntu Networking :: Point To Point Tunneling Server Connection Errors?

Mar 28, 2011

I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66

View 2 Replies View Related

Server :: Unable To Copy Data To Remote Server Using Ncftp Command

Jul 16, 2011

I am unable to use ncftp command I have defined all variables used. i have to copy the data to another server FTPS. When i am executing this command it is throwing error

ncftp -u : option unknown

I am copying total script what i am executing in my server. Please some one tell me is there any pistake in using the ncftp command , or tell me some other commands to copy data to remote server

BAK="/opt/DBbackups"
NOW=$(date +"%d-%m-%Y")
FTPU="username"
FTPP="password"

[code]....

View 6 Replies View Related

General :: Copy A Read-Only File And Make The Copy Writable With A Single Cp Command?

Mar 1, 2011

How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).

More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.

View 1 Replies View Related

General :: Copy - Take A Snapshot Of A Directory As It Was At A Particular Point In Time?

Mar 4, 2011

I have a directory containing a lot of result log files (directory size ~ 4GB), and a set of processes running that keep on writing to these files. To be able to correctly analyze the results at a later time, I want to copy the whole directory to an archive destination, and I cannot stop the processes.

I want a copy of the directory as it was at a particular point of time. As the size directory is huge (which means it takes about 40 seconds to copy) and some of the files are being written to, a normal cp -r does NOT give me a snapshot at a particular point in time, rather a snapshot of files spread over some 40 seconds. This is not good enough.

Is there a way to get an exclusive lock on the directory and all its components while copying?

View 5 Replies View Related

Server :: Amanda Unable To Copy Backup File From Holding Disk To Tapes

May 14, 2010

I have some issue with my amanda backup server, which is connecting with Scalar Quantum i500 via FC. I got the error as below 3 days ago.
These dumps were to tape 000289.
*** A TAPE ERROR OCCURRED: [No more writable valid tape found].

Normally I will load the proper tapes and run the amflush to push stuff from the holding disk to tapes manually. However this time amflush in this case did not help, Amanda immediately responded with an out of tape error again.

Meanwhile I got some errors from dmesg as well
st3: Error 18 (sugg. bt 0x0, driver bt 0x0, host bt 0x0).
scsi1 (0,3,0) : reservation conflict

View 8 Replies View Related

Software :: Make G++ Compile In Floating Point Support?

Apr 14, 2011

One of those odd things I learned the hard way is that if you are writing a shared object (library/.so) and any programs that will link to that library uses floating point numbers, the library must be compiled as if it uses floating point numbers. What that really means is, you need to declare at least one float in the source for the library or when the caller connects and tries to run code in the library, the process aborts.I end up putting a float pi (3.1415); in the code and getting an unused variable warning all the time. There has to be a simpler way, some flag to pass to g++ that says, "include floating point support even if you don't really need to."

p.s. Gosh I hope I remembered this correctly. I encountered this problem doing a multi-platform build for Windows and Linux. This COULD be a VC++ problem that I just carried into Linux by using the same source.

View 1 Replies View Related

Fedora Networking :: Make F10 Laptop A Wireless Access Point?

Jun 23, 2009

I'm trying to make my F10 Laptop a wireless Access point.

When I 'iwconfig wlan1 mode Master' I get:
SET failed on wlan1; Invalide argument.

wlan1 is a Netgear WG111v2 which worked as soon as I plugged it in after I installed F10.
I don't know is it not supported? What is? Is there a different driver I can put on that will work in master mode.

What should I do basically?

View 1 Replies View Related

Ubuntu Networking :: Make Router To Access Point To Routes LAN Which Use Wireless

Mar 3, 2010

i have a router, i use it to connect my LAN to internet. Now, my LAN only coneck via cable, i want to try make my router to be a Acces point to routes the LAN whitch use Wireless.

View 1 Replies View Related

Fedora Networking :: Unable To Connect To Access Point Using WEP?

Feb 18, 2010

Install Fedora 12 on my laptop and having problem connecting to access point using WEP . I complied with wireless setup with key but will not connect. Works with security disable, the router is a Westell 327W from what was Bellsouth.

View 1 Replies View Related

Ubuntu :: Installing From 11.04 Live Cd - Unable To Stat The Mount Point

Jul 1, 2011

I've installed Ubuntu 11.04 on a desktop and am trying to install ndiswrapper. I don't have a wired connection to the router, but I have managed to use ndiswrapper successfully on other Linux live distributions which already had them installed (eg, Linux Mint 9). By inserting the Ubuntu 11.04 Live Cd and adding the cdrom in Synaptic's "Settings > Repositories" menu, I can find it in the list of packages, but when I try to install ndiswrapper-utils-1.9 and ndiswrapper-common I get a few error messages. First, a notice pops up saying: "Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages?". I guessed this is due to lack of an internet connection, so I selected "yes" and got an error box that reads:

"E: Internal Error, No file name for ndiswrapper-utils-1.9 W: Failed to fetch cdrom:[Ubuntu 11.04_Natty Narwhal_-Release i386 (20110427.1)]/pool/main/n/ndiswrapper/ndiswrapper-utils-1.9_1.56+r2729-1_i386.deb
Unable to stat the mount point /media/Ubuntu4011.0440i386/ - stat (2: No such file or directory)"

This system has two hard drives and a cdrom drive. I've error checked the Live cd, and it came up clean. Please, can someone give me a hand getting Ubuntu to mount the cd? PS: I've downloaded the ndiswrapper files from sourceforge onto a thumbstick (version 1.56). Is there a way I can install them from the stick?

View 1 Replies View Related

Server :: IOPS On Multiple Server Single Mount Point System?

May 28, 2010

In my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.

View 1 Replies View Related

General :: Usb Flash Drive Error / Unable To Read Mount Point

Nov 18, 2010

Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.

View 4 Replies View Related

Networking :: Policy Routing Using Two Point-to-point Links?

Aug 27, 2009

This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:

Code:
# ifconfig ppp0
ppp0 Protokoll:Punkt-zu-Punkt Verbindung

[code]...

View 9 Replies View Related

Ubuntu :: How To Make A Copy Protected DVD

Sep 22, 2010

I would like to make a copy protected DVD for my security purpose.

View 3 Replies View Related

Ubuntu :: Make The New Copy Bootable?

Feb 8, 2011

i want to copy an ubuntu system from one computer to another using netcat / tar. What directories should i exclude? also how do i make the new copy bootable?

View 1 Replies View Related

Ubuntu Servers :: SSL Setup - Connection Error Unable To Make A Secure Connection To The Server

Feb 10, 2011

I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]

From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt

Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:

[Code]...

So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.

View 5 Replies View Related

Debian :: Can't Copy Downloaded File To /opt - Make It Possible?

May 12, 2011

I can't copy downloaded file to /opt

View 3 Replies View Related

Fedora :: Make A Copy Of A DVD - Burning With Brasero Or K3b

Aug 17, 2010

I was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.

View 4 Replies View Related

Ubuntu Installation :: How To Make System Copy On DVD

Feb 17, 2011

I got my ubuntu system install and I installed every thing I need and configures compiz and themes and every thing is ok. So now I want to make my system on DVDs so I can reinstall it any time I want. The system partition is 19 Gegabyte used so I must make my system on 4-5 DVDs is that's possible with every configuration and theme and every thing same?

View 3 Replies View Related

Debian :: Copy The IMG To The USB Device And Make It Bootable?

Feb 1, 2011

I've done an image according to:

[URL]

then I've copied it using:

Code:

# fdisk -l
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1145fa35

[code]....

View 2 Replies View Related

General :: Need To Make Working Copy Of Failing HDD

May 22, 2010

I run a sever 24/7/365 with Debian 5.0.4 (lenny) GNOME 2.22.3. It seems that the HDD is beginning to fail as it starting to clunk & you can hear it spinning up & down. I had lots of help in setting up the server, and i am not that good with linux...but i am learning all the time I have a spare HDD lying around, and i am wondering if its possible to use it to make a "exact working copy" of the HDD whats failing ? The spare HDD actually has XP on it, but i cannot see this preventing it from being used ?As my knowledge is still very little with Linux, and its important for me to replace the HDD, can anyone point me in the right direction to copying failing HDD ?? Also is it possible to then fit the new HDD into my server and it will work straight away ? This is to prevent any added downtime on my 24/7/365 server.

View 14 Replies View Related

Ubuntu Networking :: Point To Point (ad-hoc) SSH Over USB Or Ethernet?

Jun 3, 2010

I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.

So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.

View 1 Replies View Related

Server :: Point My.cnf To The New Sql Path?

Jun 10, 2010

I own a server with Centos 64bit and Cpanel on it and i add a second disk and move mysql there:

cp -r /var/lib/mysql/* /newdisk/mysql/

Now i want to edit my.cnf and point it to the new path but i don't know what to add there

View 13 Replies View Related

Fedora :: Extremly Slow Copy Speed (50K/s) / Make It Up?

Feb 17, 2011

I am having a very weird problem, of which I have never heard before. The problem, shortly (I will give details in the following), is that the copy speed between the partition in which I am running my Fedora and another partition where I store backup data is 50K/s, which is extremely slow (it has been usually around 10M/s, almost 200 times faster).

My laptop is a HP Pavillion Dv7 2080 ep, in which I have two disks of 250G. One of the disks is partitioned between two operational systems, Fedora 14 64 and Windows 7 64, and the other disk contains the above referred partition where I store my backups (lets call it backup disk). The problem happens ONLY when I try to copy anything from my home in Fedora to the backup disk. I first thought it could be a problem in the backup disk. Then I login into the windows and made a copy of some AVI files (3G approx) to the backup disk, which went normally, within a few seconds, thus eliminating this possibility. I try therefore to make the inverse process, a copy from the backup disk into my home folder in Fedora. It went normally, copying 4 G also within few seconds, actually with an excellent speed of 50M/s. After searching in google, I saw some people also complaining of slow copy speed (although they had 7M/s, more than 100 times faster than what I have now), and one cause could be that the source file system (in my case the Fedora home folder) would be near its full capacity. I therefore eliminate everything that I could, around 15G, and now I have like 20G of free disk space, which I think is more than enough for everything. However, the problem persists. Some people also said that it could be the type of files and/or amount of data. I therefore tried several kinds of files (from raw data files to AVI and RMVB regular video files), and several amounts of data (from single files with a few Megas to folders with 20G) and in all cases I had the same unacceptably low copy speed of 50K/s.

It seems to be a problem in the software, caused by the updates, since until 10 days ago it was everything ok. However, I usually make the updates whenever they appear but make my backups much less frequently. Therefore I don't know for sure what has changed in Fedora through the updates since the last backup I made, when everything was working fine.

View 5 Replies View Related

Ubuntu Installation :: Does Grub Make Copy Of Contents Of MBR?

Feb 26, 2011

My system is an Acer Aspire One Happy netbook. It runs Windows 7 OEM. I installed Ubuntu Netbook Remix, which works fine. Unfortunately, I put GRUB in the MBR (I wanted it on Ubuntu partition in order to use Win 7 bootloader). Acer netbooks seem to have a particular MBR (in order to run e-Recovery Management), which is different to the standard Windows 7 MBR.

Moreover, in the internet there are instruction to restore Acer MBR, but they do not seem useful, since I do not find the MBRWRWIN.EXE and RTMBR.BIN files on the hidden partition. Is there a way to tell GRUB to remove itself and restore the previous content of the MBR (something like the old "lilo -u")? Does GRUB make a copy of the content of the MBR before installing itself? Where is it, if it is so?

View 2 Replies View Related

Ubuntu :: Changing Filesystem - Using Partimage To Make Copy Of Data

Feb 22, 2010

I have my / partition on an SSD that I formatted in ext3 but I now realise that, in order to use TRIM, I need to be ext4. Can I use Partimage to make and image of the partition, format it (using GParted) and then restore the image? Basically, do Partimage files survive a filesystem change?

View 1 Replies View Related

CentOS 5 :: Generate An ISO And Burn Into A DVD To Make A New Copy Of 5.4 Installation Disk?

May 19, 2010

Previously I have Centos 5.3 installed. Eventually I upgraded the systems to Centos 5.4 Now is it possible to generate an ISO and burn into a DVD to make a new copy of Centos 5.4 installation disk? This is far better than downloading.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved