For converting a WMA to a MP3 stream 24h by day, I consider to lease a virtual server.
Is this basically possible in linux (ubuntu server 8.04), maybe with Video LAN Client software?
In windows my command line is for my network
Code:
how to have alsa convert a digital sound stream to analogue before it is sent to the hdmi out? I would like to modify asound.conf. I do not have gnome as a desktop so I need to manually input the changes to asound.conf. The reason I ask is. I have sound going out of my acer revo to both spdif and hdmi. The spdif goes to my receiver and I want digital passthrough for that. The hdmi goes to my tv and I need it to be analouge before it gets to the tv. Right now, I get passthrough to both the spdif and hdmi. (the tv is all static) I want to have alsa convert the signal for the hdmi output only.
View 9 Replies View Relatedi need to ask how can i stream live video from my usb web-cam that is attached directly to my server.
View 2 Replies View Relatedi have a PC (debian wheezy) in my LAN that serves as dlna server, especially for my TV. it runs minidlna from the repository and the system is nice.i have a stream that comes from the Internet and i can see it in URl... i can see that stream to my PC or to my mobile through a browser or VLC.is it possible to get that stream in DLNA to serve it in my LAN for devices that cannot see it directly, such as my TV?
View 1 Replies View RelatedStep #1: Generate DSA Key PairUse ssh-keygen command as follows:$ ssh-keygen -t dsaOutput:
Enter file in which to save the key (/home/vivek/.ssh/id_dsa): Press [Enter] key
Enter passphrase (empty for no passphrase): myPassword
Enter same passphrase again: myPassword
[code]...
It seems I might be having an issue that's a non-issue. I am not able to stream/ connect to a stream using vlc.I've looked at a few walk-throughs; I follow the steps and as often as not I get no error messages but cannot connect to a stream.
View 1 Replies View RelatedI was wondering if it would be possible to set up a server on my desktop that has a folder of videos converted to iPhone formats that I can access with my iPhone over the internet to stream videos to my phone?I started by setting up a server and used no-ip2 to create a domain name so I didn't have to worry about my dynamic ip changing.Then I tried unsuccessfully to transcode a DVD to iPhone format using Arista, Transmaggedon, and Avidemux, none of which I could get to properly work.
Finally I used iUI (URL...) to create a site that would appear as a simple menu to search through my movies on my website and stream them.This failed in that every time I set a static link it would change it to URL...
We have one major problem in our dedicated online mail server. In this mail server both sendmail and qmail running for send and receive mails. In this server I can able to send mail to other domain like Gmail and yahoo its works fine. But I am not receiving any mails from other domains. And automatically I got telnet localhost 25 connections refused error. When I send mail from my webmail I got like this error Connection refused Server replied: 111 can't open SMTP stream. This is I got when I send mail from webmail. I am using centos 5.2 version.
View 2 Replies View RelatedI'm using CentOS 5.5 as a media server to stream media content over my local network. Currently i'm having problem while installing last.fm scrobbler.
Here is a sample output:
yum localinstall xmms-scrobbler-0.4.0-7.fc11.i586.rpm
Loaded plugins: fastestmirror, priorities
Setting up Local Package Process
Examining xmms-scrobbler-0.4.0-7.fc11.i586.rpm: xmms-scrobbler-0.4.0-7.fc11.i586
Marking xmms-scrobbler-0.4.0-7.fc11.i586.rpm to be installed
Loading mirror speeds from cached hostfile .....
The program package-cleanup is found in the yum-utils package.
Upon searching my hard disk this is what i get:
find / -mount -name libcurl*
/usr/share/man/man3/libcurl-easy.3.gz
/usr/share/man/man3/libcurl-tutorial.3.gz
/usr/share/man/man3/libcurl-share.3.gz
/usr/share/man/man3/libcurl-errors.3.gz
/usr/share/man/man3/libcurl-multi.3.gz
/usr/share/man/man3/libcurl.3.gz
/usr/lib/libcurl.so.3
/usr/lib/libcurl.a
/usr/lib/libcurl.so.3.0.0
/usr/lib/pkgconfig/libcurl.pc
/usr/lib/libcurl.so
So it tells me that I need libcurl.so.4, but I couldn't find any suitable rpm binaries for it. The only rpm that i found was for Suse and Mandrake. How to set this up, so that i can get a fully functional media server.
First let me preface this with saying that I have been googling, and trolling boards trying to find a solution, tutorials, any thing to help me what I am trying to do, all day (since 8 am, when I started work, till now 3:50 pm) and I have found little to improve my situation.My goal is to setup my desktop (running Fedora core 12) as a server that can be accessed from anywhere. I would like to be able to have streaming music (find a song, or an album, you want to listen to, click and play) from any location, any computer, and I would also like to store files and such that I could also share with whomever I give permission. I have found plenty of tutorials helping with Apache and SSH, so anything along those lines would be nice.
View 14 Replies View Relatedsetup a media server in Linux which streams video over the internet? Is it easy to do this? I want a server that will actually encode video in real time to allow it to stream over sometimes slow or unreliable networks. Basically, I want a server that works on the internet. I have a directory with a bunch of video files, and want to make this accessible to myself remotely. For other situations, I found great and useful software (such as the PS3 media server). I'd like to find something equally as useful for streaming video over the internet.
View 1 Replies View RelatedI'm running Ubuntu 9.10 and I have got a VNC, FTP, SSH, Apache server running on it. I would love to setup a media server on it so that when I'm away from home I can stream my movies rather than download them via ftp (made even worse by my slow upload speed).
I installed fuppes however I think that only streams to xboxes, playstations, etc :/
Is there a piece of software that I could put on top of apache? So that when I'm out and about I can just open my website and from there open my password-protected media server and stream any movie file I chose?
I have a high bandwidth linux server and a lower bandwidth windows computer. I want to have the windows computer send my webcam stream to the linux server, then have the linux server redistribute the stream with it's higher available speed to any users connected to it (via http, or whatever will work).
View 3 Replies View RelatedI need help to do a program that emulates the following shell command line:"sort </etc/passwd | less".Using a socket in a connection-oriented setup.First the contents of the file /etc/password are being fed into the sort program. The sort program is then sorting the contents of the file and sending it to another programm called less. Less is paging the results so that you can see one page of the results at a time.I know that i can solve the problem this way:
1. Create a server program that will stream the contents of a file to any client that connects to it
2. Create a client application that will connect to the server and download the contents of the file. The program should then sort the file. After sorting the file the client should connect to the "less" program and send the sorted results
3. Create a server program that will listen for connections and download whatever is sent to it. It will then display that data one page at a time.
I have a debian home server right now, I'm using samba for my file server but I was wanting to stream my movies and music to my other computers. My family (the other users on the network) are NOT computer savvy, and to top it off they are using both Windows (xp) and Mac (Snow Leopard) machines. So I'm looking for software that is simple to use that will allow other operating systems to use it. I would think the easiest way would be to stream the music/movies through a home website. I have seen quite a few programs out there that stream music, but none for movies.
View 3 Replies View RelatedI am running single drive Ubuntu server 9.10 with a lot of software. Now I want to add one more disk (same size and type) and to convert this to RAID 0 without need of reinsallation. Is it possible and if yes how? I didn't find nothing for RAID 0. It sounds simple, but probably is not.
View 4 Replies View RelatedI have a desktop PC running Ubuntu 9.04. It has an AMD Athlon 3000 processor and 2G of RAM with two HDDs, one 450G, the other 110G. All my data on the desktop is backed up on the 2nd disk, together with data from 3 laptops. My plan is to use the desktop as a file and print server for the other machines and in the process free up some work space on my desk as I'll no longer need the screen and keyboard for the desktop.
So, I think, all I have to do is download the 32bit version of Ubuntu 9.10 Server Edition and install it on the desktop. Then I'll be able to access the backed-up data on the 2nd drive, and have an in-house web server as well. I will be able to administer the new server from one of the other machines, hence the free desk space.
how can i convert the ubuntu server into gui except gnome,xbuntu,kde enviornment. as they are very heavy. the purpose is basic trouble shooting like network card,internet browser,terminal command line shell prompt,login logout etc.
View 1 Replies View RelatedI am trying to use 'convert' in command prompt to convert image file format.I get the following error.
convert: UnableToOpenConfigureFile `delegates.xml' @ configure.c/GetConfigureOptions/589.
convert: NoDecodeDelegateForThisImageFormat `airplane.jpg' @ constitute.c/ReadImage/530.
convert: MissingAnImageFilename `airplane.ppm' @ convert.c/ConvertImageCommand/2838.
I have Ubuntu 9.04 and just installed Sound Converter. I am trying to convert a bunch of .ogg files to mp3 to play on my iPod and it's not working so well. In the Sound Converter options I have is set to convert to high quality mp3. I choose the folder that the files are in and after a moment (slow laptop) Sound Converter populates, I hit 'convert' and it shows that the conversion completes in two seconds. All that it did was create the new folder structure of artist/album but there is nothing in there. Not sure what I am missing. I used Sound Converter before and it worked fine.
View 2 Replies View RelatedWhat is the easiest way in Linux to convert syslog messages to XML?
View 1 Replies View RelatedI have about 1k pdfs loaded for an education project on a linux based server. That said we just found out we need them all to be PPT's to work well with the desktop sharing software. They are all categorized nicely so I dont want to recreate the wheel. Trying to see if there is some software anyone knows about that I can run and convert the files?
View 1 Replies View RelatedI'm trying to use convert, I have installed the imagemagick. I use this line:convert *.jpg test.pdf but I'm only able to convert to pdf 1 single jpg file, not multiple files at once. When there's more than one file, I get the following error: Segmentation fault
View 5 Replies View RelatedIn my home network i have installed NSLU2 in my router , and the hard drives have all my music stored in them. When i try to open a music file with RhythmBox everything its fine. But when i open them with audacious nothing happens. I can play music files that are stored in my laptop , but not from my hard drive from NSLU2.
I have ubuntu 8.10 installed.
An easy way to convert wav files into mp3 (or ogg).
$ sudo-apt-get install nautilus-script-audio-convert mpg321 vorbis-tools lame nautilus-script-manager.
after that run
$ nautilus-script-manager enable ConvertAudioFile
Now, when you right click on audio file, under 'scripts', you will see ConvertAudioFile option.
I have hosted my site from some hosting service. They are providing pretty good C panel but my problem is that the host belongs from US and maximum hosted website from US and during united states office hours my site goes down because high usage and overload on mysql server. I have tried my pc to turn into web server by fedora 14 and I am successfully to do it. But I have only one pc and It's Intel dual core with 2 gb ram. I know It's pretty good configuration for F14. Bu My pc is more that 3 and half years old. So, I want to know is it will be good idea to convert my pc into web server or should I get a new one? Or what do you say If I get a used pc.
View 5 Replies View Relatedwe have an existing debian server which host our moodle installs , but i need to look at converting to virtual and host within our test network for breal fix testing... but i cant find anything that will allow me to convert it as it stands.
we use Virtual machine manager, i would like to have used Redhat but its a no no ...
I have these file systems for my linux distro. I dual boot with another OS that has its own file system. My primary disk drive has ten(10) partitions of various sorts to implement this. If I boot Linux, is there some way to point the virtualization parts at those other file systems to boot rather than load other different files into Linux file space?
Clearly, I'm missing something in how Wine, VirtualBox and similar virtualization currently happens. But what I describe above surely seems more attractive.
I have a lot of .flac files downloaded from several sites. Most of them come with a .cue file, and the .jpg with the cover, etc. It seems it is the intention of the uploader that one rebuilds the original CDDA. However, if I had a stand-alone CD/DVD player with flac I would hardly see the point of converting the flac to cdda. Furthermore, I could even play the flacs with a software player although, in this case, the audio quality would not be so good due to the noise picked up by the signal from the PC digital circuits.
View 2 Replies View RelatedHow to Nat. I wanted to be able to resolve something like
ftp.myfirstdomain.com to 192.168.0.2
Then ftp.mysecond.com to 192.168.0.3
Just as a random example, I know these cannot be done using name based virtual hosts like in Apache. But I got this working internally using my LAN connection and the 2 IP addresses above, with Bind DNS pointing the dns's to those 2 ip addresses respectively. This worked, yet when I tried connecting from my work place to transfer some files, it kept going to the default user's home directory. Just wanted to get this project finished, 2 domains and one public facing IP address.