Server :: Change Ssh Port On RH5?
Sep 21, 2010How do i change the ssh port on my redhat 5 server. Can you tell me how to do it through the gui and through cmd line?
View 5 Replies
ADVERTISEMENT
General :: SFTP Server Port Blocked On Uni Network / Need To Change Listening Port
Oct 21, 2010VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
Server :: SSH Is Still Listening On Port 22 After Change To A New Port?
Apr 6, 2011I edited "sshd_config" file and changed port 22 to a new port. After I restart ssh, it listens on port 22 and the new port. How can I disable SSH to listen on port 22? I'm using Debian.
View 6 Replies View RelatedUbuntu :: Change VNC Server Listen Port?
Dec 30, 2010I wish to use the VNC server built in to the Ubuntu to easily access it from other computers on my local network. I need to skew the VNC Server port off of the normal 5900 to something else because I am using VNC to access several computers (sometimes simultaneously) so each VNC server needs to be set with a different port #. At this point it is all local subnet connections with no incoming internet access and I am not worried about security.
View 2 Replies View RelatedCentOS 5 Server :: Change My Ssh Port From The Default 22
Feb 9, 2010I want to change my ssh port from the default 22 to something else. I did the following: vi /etc/ssh/sshd_config; uncommented Port 22 and changed it to the desired port number. After that I run service sshd restart for the change to take an effect. Now, when I want to login into the new port I receive this message - Network error:Unable to route to host. When I change the port back to 22, I will be able to login again.
View 6 Replies View RelatedServer :: How To Change Sendmail Port Number In Centos 5.4
Aug 4, 2011currently i want to configure sendmail port number 25 im using these port numberalready how can i chage my senmdail port no.
View 2 Replies View RelatedServer :: Configure In Order To Change The Smtp Port?
Jan 31, 2010I have scalix (sendmail) installed on my server and it is working very good but I need to change the smtp listening port because I am thinking that my sendmail is being used as a spam engine.
what/how I need to configure in order to change the smtp port?
Server :: Change Ssh Port On The Servers Including Centos And Ubuntu?
Mar 10, 2010i need to change ssh port on the servers including centos and ubuntu when i make changes to /etc/ssh/sshd.config and change the port to something else restart sshd then i can determine that port 22 is not working but ssh does not connect to new port it says "no route to the host"
View 9 Replies View RelatedCentOS 5 Networking :: Change ISCSI Server Listening Port 3260 - Scsi-target-utils
May 14, 2010iSCSI Server, can I change the default port 3260 to other port ?
View 1 Replies View RelatedServer :: Postfix Port - Send Message Via Port 587 Not Port 25
May 2, 2010I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
CentOS 5 :: Postfix Mail Server Will Not Start Tried To Change Postfix Smtp Port?
Oct 4, 2010so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedFedora Networking :: 3G USB Modem Has Wrong Device Port In NM - Change Device Port In Network Manager?
Aug 14, 2009I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedServer :: If Forward A Port In Iptables, Does The Port Have To Be Open On The Firewall
Aug 5, 2009If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedServer :: Proxy SSL Requests To Another Port To Hide Port # In URL?
Jul 1, 2010server: LAMP - debian, apache2, mysql, php5. a bit info on my network: There is a another service here that already uses port 443 already. It made my website time out, hence the move to another port. PLus, i dont want the 2 services sharing the port. What I am trying to do is forward 443 requests to another port where the SSL service is running so I can hide my port number in the URL.
Here is my sites available conf file:
Code:
NameVirtualHost *:80
NameVirtualHost *:443
NameVirtualHost *:####
[code]....
Programming :: Edit Sshd_conf Files To Change The "#Port 22" To "Port 22" From A Script?
Feb 4, 2011i am trying to edit sshd_conf files to change the "#Port 22" to "Port 22" from a script.
I have tried this many different ways.
sshs1='s/#Port 22/Port 22/g'
sed $sshs1 /home/l/Desktop/test
the reason i have it as a string in this instance is because $sshs1 gets a variable, but im not working on that right yet. I've tried changing the ' to ` and ". this is what i get:
sed: -e expression #1, char 7: unterminated `s' command
sed: -e expression #1, char 8: extra characters after command
sed: -e expression #1, char 8: extra characters after command
"
sed: -e expression #1, char 7: unterminated `s' command
i know it may have to do with my regex, but i cant seem to find a decent tut.
Red Hat :: Change The Default Port (80) To 85?
Sep 10, 2010I installed Apache2 on Redhat EL 5. I am trying to change the default port (80) to 85. I tried editing httpd.conf and changed
Listen 80
to
Listen 85
It ditn't change any thing. 'netstat -tuapn | grep :85' returns nothing.
CentOS 5 :: How To Change Ssh Port 22
Jul 17, 2011I go in using nano /etc/ssh/sshd_config I change the port number.. I then restart ssh service restart.. I then run netstat -tupln and it still shows ssh as port 22!i am not sure what I am doing that is incorrect.Do I have to remove the # < ? I go to redit it and its still showing 2222 nano /etc/ssh/sshd_config ?
View 18 Replies View RelatedUbuntu :: Change The Ethernet Port Name?
Aug 4, 2011I have a program which requires running on port eth0. My current connection is named eth7. how can I change this? I went to /etc/network/interfaces but did not see the connections for eth0 or eth7 in that location. I also tried to change it in the "Network Manager" but that just broke my connection and returned errors. What Can I do?
View 7 Replies View RelatedGeneral :: Change The Default Port Of Ssh That Is 22?
May 26, 2010How can I change the default port of ssh that is 22? Because of security issue I just want to give some other port.
View 3 Replies View RelatedGeneral :: Change Ssh Defualt Port 22?
May 10, 2011i want to change ssh defualt port 22 can you suggest which port i need to use for ssh so prevent it from hackers
View 4 Replies View RelatedUbuntu :: Dont See Any Option To Change The Port?
Jun 4, 2010When setting up a new pop3 accounr in evolution, I dont see any option to change the port, my pop3 server requires port 110.Is there a way to check or alter this in Evolution
View 1 Replies View RelatedHardware :: Change LVM Disk Sata Port?
Oct 18, 2010I have Linux system with 6x500 GB sata drives on LVM. I want to change 1 of the disks with larger - 1 TB. I don't have available free sata ports, so I'll add pcie sata controller. I'll add the 1 TB disk to the pcie controller and will use "pvmove" to transfer the PEs from one of the 500 GB drives to the new 1 TB. Then I want to remove the 500 GB disk from the LVM. I want to remove the physical disk from the box and to place the 1 TB disk on its place. But I don't know if the LVM will recognize the disk? I want to remove the pcie controller from the box because the motherboards sata controller is better.
View 1 Replies View RelatedHardware :: Change Serial Port Settings?
Mar 18, 2009I am using Fedora 10 and I need to change the defaults that get set on the serial port.I know how to do what I need to in Windows, but I can't seem to figure it out in Linux.
Windows Settings:
Bits/Second '115200'
Data Bits '8'
Parity 'None'
Stop Bits '1'
Flow Control 'None'
Receive Buffer 14 (HIGH)
Transmit Buffer 16 (HIGH)
General :: E-mail Redirect And Port Change?
Sep 24, 2010I am looking to set up a system that will bring in an e-mail on a port like 4082 then sent it out to a standard e-mail port. this is a fire wall issue. I am looking for the best software I can use on an Ubuntu-Desktop platform to accomplish this and an idea on how to set this up?
View 6 Replies View RelatedSoftware :: Change The Port Numbers Of Samba?
Jan 19, 2011I need to change the port numbers of samba. Our ISP is blocking the ports 445 and 139. So i need to run samba in a different port.
View 1 Replies View RelatedFedora Networking :: Port Redirect, I.e. Whatever Comes Through Whatever Interface On Port AAAA Will Get Redirected To Port BBBB?
Feb 18, 2010I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
Fedora :: Change The MOBO And Trying To Get The Serial Port Working?
Apr 20, 2011I've just had to change the MOBO and trying to get the serial port working, I see from previous posts there are some problems lurking in the past.
setserial -g /dev/ttyS*
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: unknown, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
but I'm not seeing anything from a GPS receiver in NMEA at 4800 no par 1 stp I know that was working about a year ago. I think udev was not helping ,as I was getting permission denied to the com port, I added myself to group dialout. and no message on startup now
I need to be able to talk to a piece of kit with 9600 baud and nothing. I have win32 s/w to drive it , but it falls over in wine. My laptop still has win7 on it in a tiny partition but no 9w d connector and I'm waiting for a USB converter cable. Too many variables ! I'd forgotten all the hassle of having to install drivers just to get basic things running. But as the stupid thing couldn't manage using the driver for my NIC, I was stuck with hyper-terminal, and nothing from the GPS board @4800 or another piece of equipment running at 9600. I suspect the com port on the new mobo doesn't wan to play
Ubuntu Networking :: Using Iptables To Change A Destination Port But Keep The Ip The Same?
Mar 23, 2010I am playing around with transparent proxies, The current way I am doing things is the program makes a request to a computer on port 80, I use
Code:
iptables -t nat -A OUTPUT -p tcp --destination-port 80 -j REDIRECT --to-port 1234 to redirect to my proxy that I am playing with. the proxy will send out a request to port 81 (as all outbound port 80 are being fed back in to the proxy) so I want to do something like
Code:
iptables -t nat -A OUTPUT -p tcp --destination-port 81 -j DNAT --to-destination xxxx:80 The problem lies with the xxxx part. How do I change the destination port without changing changing the destination ip? Or am I doing this setup completely wrong,
Ubuntu Servers :: Ssh_config Can't Change Port Number?
Jun 4, 2010I've got 10.04 on a headless server on a home network. I've edited /etc/ssh ssh_config and changed line 39 from:
# Port 22
to:
Port 30000
I then
user@server$: sudo /etc/init.d/ssh reload
from the host
user@desktop$: ssh servername -p 30000
ssh: connect to host servername port 30000: Connection refused
What am I doing wrong? I've also tried completely restarting the computer.
Ubuntu Servers :: Change HTTP Port To Say 8080
Feb 8, 2011I will be setting up a web server at my house. It will be a simple page for my family to keep in touch and maybe some other stuff. Here is the problem: I believe my ISP blocks port 80. So when setting up the firewall and it list the normal port 80 am I able to edit to say 8080? I have a ddns already setup for my router and I am waiting for an email back from DynDNS.com on setting up a new domain to forward to my already setup hostname. I just need to get everything redirected to another port beside 80.
View 4 Replies View Related