I need to send requests for certain resources through another SQUID I have the following configuration of the SQUID cache_peer foo.bar parent 3128 3130 proxy-only default
acl kaznet dst_as 9198
cache_peer_domain foo.bar
cache_peer_access foo.bar deny kaznet
always_direct allow kaznet
However, squid does not pay attention and sends all requests through a parent proxy.What am I doing wrong?
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedHere is my query:
Squid document says that Squid accepts only HTTP requests but speaks FTP on the server side when FTP object are requested.
We call Squid HTTP and FTP caching proxy server. Does it also caches FTP contents? Is it possible to configure FTP clients to use Squid cache? When we make an FTP request to an FTP site via Squid will it be bypassed?
I want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies View RelatedI would like to install and configure Transparent squid proxy on a gateway server ,but i dont have a local OR intranet DNS server.I am facing issues do that ,regard .My IP series is 192.168.1.1/24
View 5 Replies View RelatedI know this seems obvious but i'm stuck. I'm trying to install squid via the command "yum install squid" and here is the output:Quote:
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
[code]....
I have done configuration of webserver and i want it to pick some information from application server,but i don want people to see that application server,please can someone tell me in detail on how to setup squid reverse proxy server so that each time people want to access my servers they can just see one server,i mean one server must act as a loadbalancer to other servers,let say a sum of up to three servers.I am using redhat 5 servers with apache 2,and squid version that i have is 2.6.
View 5 Replies View RelatedI am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
I'm looking to set-up a squid server. Are there any good tutorials out there for this?
View 1 Replies View Relatedi m using squid for internet sharing, i am facing problem while accessing public ftp, therer is no problem in accessing local ftp, but if try to access public ftp like ftp://125.125.20.2 i am getting error
' An FTP authentication failure occurred while trying to retrieve the URL: ftp://125.125.20.3/
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.'
if i try to access local ftp ' ftp://10.185.200.12' getting no error
What is the command for installing squid?
Which distribution is needed? linux server?
i want to setup squid proxy server at my home. my service provider has ISA server install on its machine. in windows as a client we have to enter proxy settings manually to IE and firefox. but now in squid where i have to define to use this proxy settings. and what about /etc/resolv.conf . my service provider's connection settings are stated as under.:
IP ADDR= 192.168.1.x
subnet mask=255.255.255.0
Proxy= 192.168.1.1 port= 8080
I'm looking for VPS provider in the US. I'm just trying to get around geo-location restrictions and I figured that the easiest way would be to get a cheap VPS and set up squid. (I'm planning on sharing it with a few friends) Anybody has any experience with any VPS providers?
View 2 Replies View RelatedI'm trying to configure a squid server on CentOS 5.4.
It's really good but I think is there any squid alternative.
Is there any software like squid?
I have 10 systems on my network and I have centos5.5 installed on server. All other clients are on WinXP. I am using squid server to share internet on my network.Problem is: whenever an user trying to open a website through squid server, it opens too slow, but if same user tries to open same website by passing squid server, it opens 3 times faster. Downloading speed is same in both scenario. Only buffering speed is slow through squid.
View 1 Replies View RelatedI am using Red Hat Linux and i want to to configure SQUID server on it. The server has two Lan cards.WAN eth0 192.168.1.200LAN eth1 192.168.1.210 I have a static IP from my ISP. In my private network i have 40 computers running windows xp and fedora ,ubuntu as a destop pc's from range of 192.168.1.10 to 192.168.1.40 In my server computer I can brows internet because it is directly connected with the ISP.For configuring squid should I first make this computer as a gatewat by packet forwarding i.e # echo 1 > /proc/sys/net/ipv4/ip_forwardand then configure for squid server
View 1 Replies View RelatedI have a Printer which is attached to Linux System which is fedora 12. I have squid proxy server which is installed on CentOs 5. My squid works perfect. I am using it with wpad.
Now I can access the the cups page using
192.168.x.2:631 without proxy setting
But when I configure my browser with proxy setting 192.168.x.2:631 doesn't open. Due to this users are also not able to print. How to get cups working with squid
small office network with Linux CentOS 5.4 internet server. I use Squid 2.6.STABLE21. I have static IP.If I masquerade my small office net FTP works, but if I disable masquerade then FTP doesn't work through Squid.I was trying to stop iptables but the problem was the same.
View 9 Replies View Relatedhow to trouble shoot the issues on tcp_miss in squid ubuntu
It is really impacting our production as the files are 90% miss
I've been pulling my hair out and can't figure out what's wrong. I have dhcp, squid, and dansguardian all running on my server, but when I point a client to it for a proxy (192.168.1.15:8080) and try to get to a website, nothing happens and the connection times out. When I don't bother with the proxy, the client has no trouble getting to the internet. I've verified I can ping the server and gateway from both machines. And the services are running, no errors noted in the logs. Do I need to do any iptables or selinux changes?
My network is very basic, several clients on the same network as the server, connected to a verizon gateway. Local addresses are 192.168.1.x. The server is 192.168.1.15, gateway is 192.168.1.1.
I'm using:
* squid-7:3.1.8-1.fc12 (x86_64)
* dansguardian-2.10.1.1-3.fc12.x86_64
* Fedora 12
My squid config file:
Quote:
#
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
[code]....
I have created ACL to allow yahoo domain to some clients.
acl ym-src src 192.168.1.10
ACL ym dstdomain mail.yahoo.com
http_access allow ym ym-src
So its work just allow to open mail.yahoo.com but unable to login , As it block javascrpit and also unable to open login.yahoo.com:443. Tell me to which dstdomain should be allow to access mail.yahoo.com with out any disturbance.
first i'm new in this filed of linuxi have Debian 5 serveri need to know how build squid and cache in server
View 1 Replies View RelatedHow I can implement quota for my webproxy users in squid?
View 5 Replies View Relatedm using Squid 3 for web cache and i want to use multiple outgoing ip addresses. Not 1 ip for 1 client, i want to rotate several outgoing ip addresses to the same client.
Client A --> outgoing IP A
next conection
Client A --> outgoing IP B
and so on
to configure squid as a non-transparent proxy? I understand https cannot be filtered using squid as a transparent proxy. So i need to find out how to configure squid for https filtering.
View 1 Replies View RelatedI want filter some sites on my network by squid .
My Distribution is suse server 11 squid 2.7
i am using squid on fedora 12. I have two wan DSL links. is it possible that two dsl connections can be used on linux for loadbalancing.One requsest goest with first dsl ethernet and other request go to other dsl ethernet Like RoundRobin.
View 1 Replies View RelatedI configured squid in oracle enterprise linux 5.I want to block skype access.i configured the following to block skype.but it is not blocking.acl skype_blocking urlpath_regex [0-9]+.[0-9]+.[0-9]+.[0-9]+ http_access deny skype_blocking
View 3 Replies View RelatedI'm having a problem at the moment (sometimes), tail -f cache.log
[Code].....