Suppose when I install squid proxy server Can I view the web pages visited by a particular user/machine in a particular session? I think we can analise the information by the log files of squid. But can I view the page(static)?
View 6 Replies
I am experiencing a problem which I lack the knowledge to crack at this stage. I run a home server (2.6.28-19-server #64-Ubuntu SMP) which firewalls and proxies for my LAN (including 2 linux boxes, a vista box and a win7 box).Most of the time this works well. Very occasionally we will run into a website which will not display at all on the LAN boxes.Examples: for a long time I could hit the forums.egosoft.com site but not the egosoft.com site. Now my wife can't hit www.boden.co.uk. I'm pretty sure that the problem is in the Squid3 config. solation testing:Run the vista box direct into the ADSL modem: get the website.Hit the website using Lynx through SSH on the server box: get the website.Try to get the site on a browser (have tested with IE8 and chrome) on any of the win boxes through the proxy - no joy. DNS error.Firefox on Ubuntu desktop from the linux client boxes gives an error message about an unrecognised form of compression.I can only assume that I've misconfigured the Squid3 proxy in some way - it works for 99% of sites but fails utterly on others.
View 9 Replies View RelatedIs there a utility or method enabling easier navigation (keyword search, hyperlink etc) or color/syntax highlighting when viewing man pages?
View 7 Replies View RelatedFirefox is crashing whenever I go to a page with a java applet such as this one [URL]... I get the following output in the command line:
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize: using /usr/lib/classpath/gappletviewer.
GCJ PLUGIN: thread 0xb5e191f0: NP_Initialize return
GCJ PLUGIN: thread 0xb5e191f0: GCJ_New
GCJ PLUGIN: thread 0xb5e191f0: plugin_data_new
[Code]...
I installed webmin on Debian apt-get install webmin. After installation following message came.
Code:
Setting up webmin (1.510-2) ...
Webmin install complete. You can now login to https://IP:10000/
as root with your root password, or as any user who can use sudo to run commands as root. So I infer that the installation was successful.
But when I do
Code:
http://IP:10000
I get following error
Code:
Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error.
I have configured squid proxy on centos 5.5 and some of my squid.conf file has following lines
Code:
http_access allow ncsa_users office
There are 3 users called "user034, user035 and user050" in the /etc/squid/squid_passwd file need to restricted access to internet except sites www.abc.com form anywhere in the lan. Once they logged in any ip, rule should apply.(that means no ip related acl, only user name related) How can I configure this in squid.
How can I configure squid to allow access from untrusted segment only to selected pages? My configuration is as follows
Code:
acl untrusted src 192.168.78.0/255.255.255.0
acl allowedpages url_regex -i "/etc/squid/allowed.txt"
[code]....
Is there anyway to monitor the current bandwidth in use by a user (NCSA auth) on squid? Occasionally we get a user downloading too many videos at once, which blocks bandwidth to other users on the network. As I have no idea which user it is until the end of the day (SARG reports), we just restart the squid server to disconnect their downloads.
View 6 Replies View RelatedI want that squid error pages have the company logo. I edited the page called ERR_ACCESS_DENIED but the image doesn't show (image its in the same directory as ERR_ACCESS_DENIED).
I tried png and gif formats to no avail.
Also I found this but I don't get what the writer is saying so I cant do it.
http://www.creative.net.au/evil/squi...ge_pages.shtml
I'm running a squid proxy in my ubuntu server, and I must have mess it up with the squid configuration. Users, cannot, access https pages. Can you tell me what to change in my squid.conf, so, to fix this?
Here is my squid.conf (witch is a friends conf, that i have change for my needs...)
Code:
http_port 8888
#http_port 3128
icp_port 3130
acl QUERY urlpath_regex cgi-bin ?
code....
I'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
Is there any way to view the any user activity/ commands history and date, time in the system? I look at the /var/log/secure but I can find only the login/ logout attempts and "history" command doesn't come with date/time that the user issue the commands. Any there any best practice to audit the user activities inside the system?
View 9 Replies View RelatedI was chatting with my 83+ year old mother last night on the phone about her computer. She boots about 50-50 between winXP and openSUSE-11.1. She was complaining about some Windoze problem that neither my wife nor I could remotely fix (with us living a continent away) and she noted she would not boot to winXP if it were not for the fact she can play back (from her Hot Mail account) power point presentations MUCH easier under winXP than she can under Linux. Hence she often boots to winXP because she can handle those files easier under winXP.
View 9 Replies View RelatedMy squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedRecently I noticed, that manpages are not available anymore for a normal user:
Code:
$ man grep
No manual entry for grep
See 'man 7 undocumented' for help when manual pages are not available.With root privileges everything works fine
This question is regarding squid based security. We would like to enforce browser security onto our users and would like to know if anyone has performed this. Our goal is to check a users browser version/plugin level before allowing them to access the internet in our organization. If their browser does not meet a standard compliance level such as patches or if they are using i.e. 5.0 we would redirect them to a page telling them that they need to update their browser before access will be permitted. Has anyone performed any types of checks like these?
View 4 Replies View RelatedI need to stop the viewing of robots.txt on my website. I get the contents of the file displayed in my browser when I issue the command: [URL] stop this as it displays all the directories I don't want them to go to.
The main problem is that I can look at any directory on my site and get a file listing and then right-click on that file name and then save it to my client hard-drive all from my browser. ex: [URL] I think I can change this behavior in the apache config but don't know enough.
Im using squid proxy server..i want to limit bandwidth for single user using squid proxy.
View 6 Replies View RelatedI am using auth_param basic program /usr/lib/squid/squid_ldap_auth to authenticate users using squid from ldap. The user and pass is in clear text over the network between the browser and the squid server. Any way to send it in an encrypted format??
View 2 Replies View RelatedI like AWstats for viewing/visualizing web traffic to my server. However, I am in a situation where I would like to visualize ALL traffic to/from a network, in a way similar to AWstats. That is to say, Free and Visual. The program will have to be linux/http/java based as it will run on a linux server off of a Network Tap.
View 5 Replies View RelatedI running Squid 2.7. I using NCSA veryfication so only registered users may use proxy server. I want to allow only 1 connection to proxy for 1 user. Why not per ip ? Alot of users have dynamic IP's and i want to avoid password sharing beetween users. Any idea how to do it in squid ? Mb other autentyfication system connected to squid granting access to proxy server ?
View 3 Replies View RelatedI have Squid and Dans set up on a passthrough box with 2 nics, port 80 requestsEverything is working great. I need to know if there is a way to set up Dansguardian so that a user can enter a password on a blocked page to access it.
View 3 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI've installed qmailtoaster on CentOS. I use vqadmin for managing virtual domain. I can list the current domains on vqadmin interface. But when I choose "View Domain", enter a my domain and choose "View Domain", I receive a white page. I can't view the information about my domain. Please help me to resolve the problem. I can create a new domain and view the domain on vqadmin but I can't view the existing domains.
View 1 Replies View Relatedhow to configure redhat squid in graphical user interface and uses of squid
View 2 Replies View RelatedI rented a server to run CS 1.6 game servers. I had someone install Apache and configure my server to be able to use control panel for my game servers( i am running 4 gservers and have 5 ips = 1 ip is free). When i type my primary ip in the web browser it displays the Apache test page.
My question is can i add pages to the Apache without messing up anything with the control panel or my game servers. I am familiar with html. My primary ip is used for 1 of th egame servers but i can change that if necessary. And if possible to add pages how to add a site name, sth like [url] instead of entering the primary ip to display the content.
I have installed lighttpd from svn as
Code:
Then I created four directories
Code:
And ls -l for following is
Code:
So permissions are correct upto here.
Then
Code:
Changed the following to
Code:
To
Code:
Then
Code:
Now I run
Code:
I can see
Code:
lighttpd is running.
Following is lighttpd.conf [url]
I created some html pages in /var/lighttpd/ in a directory called jp (which I had made).
Permissions of Document ROOT
Code:
And the directory
Code:
I was not able to see the webpages [url] but I was able to see [url] so why I could not browse the directory jp
I am getting a 404 not found error. Where as the page exists.
Im using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
View 3 Replies View Related
