Learning samba. The samba on a server and the samba on clients arent the same conf. OK; but it pam/nsswitch is set to compat only, can the /etc/passwd be automatically updated from the server to the clients?
shall it need ldap on the server ?
I just installed SLES 11.2 X86_64 and have SMB Server started after adding 2 lines to smb.conf:1. NTMLv2 = Yes2. name resolve order = wins bcast host lmhostsThere are also 02 new DWORD lines I add to Win7 clientsHKEY_LOCAL_MACHINESystemCurrentControlSetServicesLanManWorkstationParameters 1.DomainCompatibilityMode = 12. DNSNameResolutionRequired = 0Of course a few number of modifications I made from Yast to enable SMB Server and Client, and bcast as well. Now I am able to join my Linux Domain without error at first reboot from win7, but it seems spending a long time about 30 secs for auth. even I test on a very fast network system, all with core quad 3GHZ CPU and 4GB DDR2I would like to mention here that before I made the above changes I did a lot of different modifications onto my win7 clients (I found many suggestions online), and all seems mess up and never work; Then I had to reinstall win7 from scratch and just add 02 lines as above, but it works.
View 3 Replies View RelatedI am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log
[code]...
In my work I want to build up a Linux based network, where windows and linux clients are going to share a Thecus network drive.Each client will have specific permissions for accessing the samba shares. I have installed Ubuntu SRV 10.4 with gui and webmin.
View 1 Replies View RelatedI use OpenSuse 11.3 and I successfully built a samba/openldap server. However the raoming profiles were not working so I removed the roaming profile part of the samba and the openldap using ldap account manager. I also rejoined a couple of the computers back to the domain successfully (it was not an instaneous join, it took a good minute or 2 to join each pc). Now I cannot cannot login to any of these computers with the domain credentials. I can share using the UNC path no problem and this was working find about 1 week ago.
On 1 of the computers Iw as able to finally get a log file saying this:
I have the problems with transfer speed between samba and Windows XP clients.
Samba server configuration:
Quad Core 6600 CPU.
4 Gb RAM
OpenSUSE 11.2 with kernel "2.6.31.12-0.1-desktop"
Samba - samba-3.5.1-1.1.i586
Test: 4 GB File copying. One file.
Transfer speed from Samba Server to Windows 7 and XP clients:
(Windows clients copy file from Server share -> to local drive)
From Server to Windows 7 client 1:
85-90 Mb/sec
From Server to Windows 7 client 2:
90-100 Mb/sec
From Server to XP1 client 3
75-100 Mb/sec
Transfer speed from Windows 7 and XP clients TO Samba Server:
(client copy file from local drive -> to server Share)
From Server to Windows 7 client 1:
12-20 Mb/sec
From Server to Windows 7 client 2:
30-35 Mb/sec
From Server to Windows XP client 1
20-27 Mb/sec
(Copying file from Windows local drive to Windows remote share)
From Window 7 client 1 TO Windows XP client 1
40-50 Mb/sec
From Window 7 client 2 TO Windows XP client 1
50-60 Mb/sec
Copying file from Windows 7 client 2 share -> TO Windows XP client 1 show me 100-120 Mb/sec speed permanent.
Copying file from Linux hosts to NFS server is stable 50-90
Mb/sec bidirectional.
This part of my smb.conf file
Code:
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2009-10-27
[global]
log level = 1
debug level = 0
max log size = 50 .....
I have very slow write speed when copying file from Windows clients to Samba Share. Samba speed is slower than Windows native clients connections ?
I want to replace Windows AD with SAMBA I want to know what policies restrictions I can get in SAMBA as compared to windows AD - whether it is possible to restrict clients not to change IP, access cdrom or control panel.
View 1 Replies View RelatedOn all of my xp clients no matter what the username is is I am continously getting the error saying that the profile cannot be found. I just built this domain recently and since day 1 the roaming profiles have not worked.
here is my smb.conf:
# Primary Domain Controller smb.conf
# Global parameters
[global]
unix charset = utf8
[code].....
I have a samba server running on Mandriva v 10. Lately one of the users who was logging in to and using the server normally cannot do so. I set up a new user on another workstation and he also cannot connect. the server appears on the network in the workgroup but when he tries to click on the icon to connect windows gives an error which says that he has no permission. I can log in normally without any problem. Can any one provide an answer? Both the unloggable users are set up as samba users with samba passwords.
View 4 Replies View RelatedI've done this before, maybe ten times. This time is different. I don't know why, but Samba will not allow any clients to connect.
I've done:
- installed samba
- setup the samba shares
- have a samba user/passwd
- authentication = users
- punched in the samba stuff for firewall
- workgroup is set right
What the heck? I cannot get any client to connect. Not even the server machine can connect to itself through a client. What am I missing here???
Just for the record, I'm trying to connect to \SERVER:
Code:
Code:
I removed a whole lot of comment lines in the config file.
i have an Opensuse 10.3 server running samba and i just wanted to know how i could attach ms dos clients to samba if thats possible,i tried downloading TCP/IP software for dos but i could not find anything on the net that works.
View 9 Replies View RelatedWe've been running samba on linux for a while and everything was fine. All of a sudden when you add new clients to the domain you get the error message :Logon Failure:unknown user name or bad password. This to me seems like a windows error message and not a samba error. When you remove an existing machine (ie on domain) and then try to rejoin it to the domain you fail.
View 4 Replies View RelatedI have been able to accomplish my goal of creating an AD-like authentication using LDAP,SAMBA and LAM. From what I have seen you can have this type of setup but it doesn't allow the passing of group policies to the desktops of the users.
View 2 Replies View RelatedIm currently using an english book to setup my samba server, and im having problems understanding it.
I dont want to use root to join clients to the domain; i prefer creating a plain user.
Ok, so, the steps i follow are:
net groupmap add unixgroup=srvadmins ntgroup="Server Admins"
net groupmap add ntgroup="Domain Admins" unixgroup=dmnadmins rid=512 type=d
net rpc rights grant 'ORAServer Admins' seMachineAccountPrivilege
This way, i have a group called srvadmins with permissions to join clients, a group called dmnadmins with permissions to manage users and other permissions, and root.
Now, users: "root", "dmnadmin"(from dmnadmins group) and "srvadmin" (from srvadmins group) can add machines to domain. Root because is root, srvadmin because i granted permissions, and dmnadmin because is admin
So i wonder, why srvadmins group is needed to be granted privileges?
I tryed to lower dmnadmins privileges by revoking semachineaccountprivilege privilege, but didnt worked
net rpc rights revoke 'ORADomain Admins' seMachineAccountPrivilege
looks like its privileges comes from another group and it user managed to add a machine to the domain correctly.
Ok, so, is this really usefull? why do i need 3 kind of users to be able to join to the domain?
I feel ashamed for even asking this, since it seems like there's about 3 samba questions here every day. However after an hour of searching, I keep finding strange variants that aren't what I need.
My Goal: Create a single file share on an Ubuntu Server - share it via samba to Windows clients that are on a domain with active directory. It sure would be nice if AD authentication would work - so users don't have to type in a linux user/passsword each time they want to access the share.
In my adventures, I've found the following items (which may overlap)
1. Joining the server to a Windows Domain
2. Turning the server into a Windows Domain Controller
3. Authentication with LDAP (still not quite sure how/what this would do)
4. Stuff with Kerberos
5. Lots of people bickering about Samba 3/4 & how it's impossible to make Samba a PDC.
I'm not sure if I need to make the ubuntu server a domain controller or not...all I want to do is create a file share and share it on the domain...I don't need to make the ubuntu server a domain controller for that, right? Maybe just a member? Maybe nothing at all?
I guess if I want to authenticate stuff correctly (or forward authentication requests? Not sure), I probably need to join the ubuntu server to the domain...I think.
But let's say I do join it to the domain...then how to I create a file share that is authenticated via active directory rather than a local ubuntu server account? I see a dozen guides on joining the server to the domain, but nobody ever mentions sharing the folder over the domain.
The lines are also blurred between joining Ubuntu to the domain and making it a domain controller. What should I keep an eye out to avoid in these tutorials?
I get lost between the Kerberos/LDAP/Samba/WinBind etc...and I have a feeling I don't need all of these for something this simple.
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
View 2 Replies View RelatedI have a fileserver running openSUSE 11.2 and samba services for file access from MS Windows based workstations. My question relates to changing default permissions on files and directories created from the windows clients.
Following are extracts of the /etc/samba/smb.conf file :
Even with the above entries, sometimes there are files and directories created by the windows clients having permission
Probably my lack of understanding in ACLS.
I need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
View 1 Replies View RelatedI have tftp-server running on Centos 5. Clients which are on the same subnet as the server are able to get and put without problems. I have a client that is across the internet that is having trouble getting files from my tftp server. A tcpdump reveals that the client is requesting the same file over and over again. In /var/log/messages, I am see the following error repeated over and over until the client finally gives up.
localhost in.tftpd[12727]: tftpd: read: No route to host
How to configure linux vpn server for windows clients & roadwarriors connection?
View 4 Replies View Relatedi want to configure an Open LDAP server in Ubuntu....and also want it to connect to its clients, i have two machines for testing,one for client & one for server, i followed the tutorials on ubuntu documentation,but did not succeed in making either the client or the server,
View 2 Replies View RelatedI have to have a Linux server for shell programming on Windows (XP) clients
View 3 Replies View Relatedif I use Linux File server with NFS Configured, Can MAC clients (workstations) access the files on Linux server over the LAN network
View 7 Replies View RelatedI have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
In my network the client systems access internet through my server which has ubuntu 9.10 server edition in it.I gave my server's ip address as name server's address in /etc/resolv.conf file in the client systems. And i have assigned static ip to my systems. i have not configured squid in my server.I just want to know whether the website acessed by the client systems will be registered in the server or not, with the coresponding ip addresses.
i have checked system log file in server,but i can't find any ip address entry of the client systems in it.which file i have to actually check, or should i need to configure any extra things to monitor the clients web history in server.
I'm presently writing software to keep my system time from drifting, it uses an external clock device.To verify it's accuracy I'm running ntpd as a server, and have another server monior the first as a client. This allows me to compare the offset with other 'valid' time servers.The problem is that the monitoring client keeps synchronising with my development server. How can I configure either the dev. server or the client so that it's time won't be selected as a good time source?The ntp.conf on the dev. server looks like:
Code:
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
[code]...
I would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
I'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run
Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!
Whenever I modify my pam file as shown below I can no longer log into my centos; I have to go into single user mode and undo the changes. What I want to do is log all failed authentication attempts but I don't want it to affect the root user account.
# vi /etc/pam.d/system-auth
auth required pam_tally.so no_magic_root
account required pam_tally.so deny=3 no_magic_root lock_time=180
Im having a problem with our pxe environment. We have around 200 clients per server to boot from tftp and when we hit 250 the service just freezes. So, our options are to either add more servers or move to a more robust protocol. Is this feasible?? How can clients boot from ftp?
View 3 Replies View Related
