I've just installed ProFTPd with mySQL and need to collect and/or parse statistics about users, traffic usage and so on. I've googled for a while and found no luck on getting some good guidance or manual on that. And on ProFTPd.org not much of info concerning the mySQL.
View 3 RepliesIm having proftpd 1.3.3a standalone on squeeze with mysql backend. It all works fine with one little problem. When i log in to directory, there is nothing in it - knowing there is shed load of files. Directories are simply not being listed. Im logging in as group member and directory permissions are rwxr-xr-x. In addition to that when i try to create new directory connection is being lost and client attempts to reconnect. After successful reconnection, connection gets lost and over and over again until i abort.
[code]...
i find Failed binding to 0.0.0.0, port 201: Address already in use. Check the ServerType directive to ensure you are configured correctly.
I already have my laptop as a server using a LAMP server + proftpd and the FTP->MySQL link up. I built myself a new Headless and set up the SSH and VNC on it and all that good jazz. LAMP works and everything. Proftpd+MySQL (using the proftpd-mod-mysql package from repo) doesn't seem to work on this headless box. So I used the tutorial from [URL]... Thinking "I'm using 10.04 - it's close enough". Both came up with the same error. 421 Service not available when I ftp from the localhost. Is their something I'm missing? the Laptop set up (also 10.04) works groovy fine. Also all the log files are blank.
View 2 Replies View RelatedI am trying to monitor server throughput with a centralized ntop instance running as NetFlow aggregator and various NetFlow probes (nProbe, fprobe) on the Servers.ntop shows the probe as NIC correctly and receives the data, but it only shows one Host under "Hosts", which is the server itself. I expected to see a host list just like it is shown when running ntop locally (i.e. the server ntop runs on and every host he contacted separately). This happens both when using nProbe and fprobe. Have I misunderstood the concept of NetFlow Aggregation or am I using ntop/nprobe wrong?
View 1 Replies View RelatedI'm looking for a monitoring tool like ntop, but can preserve statistics for http traffic.
View 1 Replies View RelatedI am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I'm using ProFTPd as my FTP server on a CentOS 5 box. Since updating to version 1.3.3c, I seem to have very specific problems. Connections work quite fine with about any FTP client out there, including the basic ftp command from the Linux prompt. However, when trying to connect to that server with LFTP, things go wrong. When connecting, all I get is [Connecting] then [Logging in...] and then nothing. I have to add that SSL is forced off in lftp.conf (I read it could be the problem). I sometimes get a counter for reconnection, but it never works.
The command I use in lftp is : open -u <user>,<pass> <server_ip>, the ls for lftp to establish the connection. I don't see anything at all in the server's log. I just see "FTP session opened" and "FTP session closed" in /var/log/messages" and nothing in /var/log/secure. I can give you a strace if needed. Please keep in mind that the server WORKS with anything but LFTP and NCFTP (which I also tried).
I am pretty new to Linux and I want to start a ftp server with proftpd. Well sofar I have made one but there is one problem when I login with windows, the computer don't ask for a username and password. Instead he just show some folders from my home directory.
I have used the standard proftpd config file, and tried to change some things with online tutorials but non of them worked with windows (only for linux ftp connections). Can some of you refer me to a good tutorial for a multi user ftp linux server or explane me what to do?
which is the best vsftpd or Proftpd or Pureftpd ?
which is high secure and reliable ?
Pureftpd or Proftpd can install on Centos ?
I followed this tutorial trying to set up proftpd. I'm using Slackware 13.1, but I had assumed most of the tutorial was all relevant still.Using the default proftpd.conf file, I was able to do anonymous login, but I was hoping to use the conf file in the tutorial to only allow certain users, so it currently looks like this:Quote:
# To really apply changes reload proftpd after modifications.
AllowOverwrite on
AuthAliasOnly off
[code]....
I run Debian 5 64-bit machine with 2 IP-addresses. I installed ProFTPd through init.d instead of standalone but when I start it, it gives the following error:
Code:
ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode. Check your configuration.
If I select standalone as servertype through the config, it works good.
Previously, I had this same machine on the same OS with 1 IP-address. I installed ProFTPd and it worked well with init.d . Maybe the 2nd IP is causing it? How can I make it work through init.d without having this error?
I installed proftpd on a new CentOS 5 server, yet when FTPing in (I can log in fine), the files and directories do not list and I get a "550 filename: Permission denied" error each time I try to "put" or "get" a file (I can tell that the file is there, though, because if I try to access a non-existent file, I get a "No such file or directory error" instead of the permission denied error).
View 10 Replies View RelatedAccording cu proftpd documentation this should limit upload file size to 5 MBytes to everyone excepting user crystal which is allowed to upload 100 MBytes.
Code:
# Restrict upload to only 3 megabytes
MaxStoreFileSize 5 Mb
MaxStoreFileSize 100 Mb user crystal
My Proftpd also restricts the user crystal to 5 Mb. It seems the second line is not taken into consideration.
I recently installed ProFTPD on a Centos Linux with configure,make,install...(yum install proftpd didnt work) i installed everything it works but i cant control it through Service like, Service proftpd start,reload,stop like i used to on older servers.
View 5 Replies View RelatedI set up a FTP server for a client. Running Ubuntu 10.10 server and proftpd. While setting it up, I was able to log into FTP from filezilla from in my office no problems. Now suddenly I cannot access it from inside, but I can still access it like normal from outside my network.I am getting 500 illegal port command when using activeAnd when I use passive, I get fail to retrieve directory.The server is on a DMZ, so ports should not be a problem, and according to our admin nothing has changed within our firewall
View 21 Replies View RelatedI recently had a problem with Proftpd, when execute proftpd return the next error:
# /sbin/service proftpd start
Starting proftpd: [FAILED]
the file configuration is:
I am literally quite stuck with proftp the version being: ProFTPD Version 1.3.3e# I have the following config:
[Code]...
I mean would I need to logically seperate out a series of passive ports and then open them using my custom routers NAT, so each passive port goes to its own virtual host as such? Just a bit confused about what the next steps would entail I mean I don't have any firewall on my Linux box, don't see the point since I use pfSense and an IPS/IDS and it's never been hacked since!
I cant figure out why my server running fc14 keeps saying login incorrect 530. I am using gproftpd. I know that the login is correct though. For instance:
Lets say my user is "goober" and my pass is "fedora" and I go and type that in when I try and login to the ftp it says login incorrect.
I'm having quite a hassle getting proftpd to work.
My setup:
- CentOS 5 (latest version)
- ProFTPD Version: 1.3.1 (stable)
Want do I want:
A simple FTP server which allows me to acces the /var/www/html directory to upload new files for my apache webserver.
What are my problems:
When trying to login it says the following:
***Begin***
[root@ICT2-Gateway ~]# ftp 127.0.0.1
Connected to 127.0.0.1.
220 FTP Server ready.
500 AUTH not understood
[Code]....
As you can see this has nothing to do with faulty firewall settings since i'm only trying this locally. Futhermore the password is 100% correct (and keyboard layout).
Since I've changed alot in my config file it thought it's not worth mentioning here, I'm reverting back to default.
I have a new setup of 8.04 with Apache2, MSQL5 and PHP5.However, I can't get the PHP to run. It is NOT the common problem of the browser offering to download the files. In my case I have some PHP in an HTML file, but the PHP is just ignored.
I have played around with my httpd.conf and also php5.conf files, but I couldn't make any difference.
My httpd.conf sets the document root to /var/www and if I put a php file in here with command phpinfo(), then it seems to dispay correctly. My HTML files are /var/www/app/index.html
i have been havin a little trouble with my ftp server im using proftpd and have been able to connect to the box on local lan but it stops with an error about tls packet.
i have been following a guide on settin up my server [URL]...and have attached my config and error details
i have just setup a firewall using iptables on centos 5.3 but there's an issue with ftp
i can connect and i can login when i give command "ls" it says entering passive mode
and afterwards it times out do you know why? i have port 21 open in my firewall but still....
just thought i would throw this out there as a google search doesnt even come back with what i need. I have setup proftp with a mysql auth on a debian box. When i save files or try to modify them i get an error. Ie i dont have permission. When i look at the permissions for the files, it has a 2001 user permission and a ftpgroup as the group permission.
I want it to be ftpuser and ftpgroup with readable and writable permissions for the user and group. This is my second proftp box and i basiclly copied the config files over from the old box.
How do you configure proftpd so that once a user has failed to login and reached the MaxLoginAttempts. That they can not retry logging in for another 4 hours ?
View 6 Replies View RelatedSo, I wanted a master ftp user that could access all the folders for all the users. I did this by creating a second root user. I'm aware of all the security considerations, and if there's a better way to do this than creating a root user I'd really like to know it. That said, my issue is that my new root user is still unable in FTP to access folders owned by other users that aren't world readable. Note that this is ONLY when logging in via ftp. If I login through SSH I can access all folders without problem and without the need to sudo. So this is a true root user. Does anyone have an idea how I can fix the proftpd configuration to allow my root user access to ALL folders no matter the owner?
View 3 Replies View RelatedI managed to successfully install LAMP on my VPS and proceeded to install Wordpress only to run into an odd error.When I click on index.php, it starts to load but nothing happens.
The details:
LAMP = CentOS5.5, Apache 2.2.18(compiled from source), MySQL 5.1.57(compiled from source), PHP 5.3.6(from source too) My site: ottomatic.org as you can see in the index of files index.php is what I'm trying to load and if you check phpinfo.php you can see that PHP was installed correctly too. I added an .htaccess file with 644 permissions to my web root directory and that only seemed to produce an error, this is what I put in the .htaccess:
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
[Code]...
After upgrading ubuntu server to the latest version (according to apt-get) proftpd stopped working. When I try to execute proftpd I get the following message (when logged in as root or user with root privileges) :
Code:
Line 18 in modules.conf looks like this:
Code:
I've tried removing and re-installing proftpd, but this doesn't help
If I comment line 18 in modules.conf, I just get permission denied on the next LoadModule command...
Can I remove all modules? or is there a way of fixing the permission denied issue?
So I've been trying to get a single user to login to an FTP site I've created using proftpd and I haven't had much luck. So check this out: this only applies to one user, I can "su" to the user account so I know the password is set, and I am even able to SSH into the box as this user. This totally eliminates a bad/incorrect password and the server IS accepting connections on port 21 because I can FTP as other users. I've ruled out the client because I tried locally and using a command promptWinders but still no luck. This is what I'm seeing in the logs when I attempt to connect using an FTP client.
::ffff:192.168.1.118 UNKNOWN proftpd [18/Jul/2011:15:57:44 -0700] "USER crownftp" 331 -
Jul 18 15:57:44 ctserver-2 proftpd: pam_unix(proftpd:session): session opened for user crownftp by (uid=0)
[code]....