Server :: Multiple Folders To A Single Path
Mar 27, 2010
We have too many audio Paths, for each user have one. We would like to create a unique folder to Read in network.
For example:
The idea is Mapping all folders to the path /pub/Music in server, so all user can access all music online in the server.
Very Well. How we can do it?
And when pc1 and pc2 have the same subfolder, like Beatles, and in the subfolder have different folders ( PC1-Beatles/Revolver ) (PC2-Beatles/Habbey_Road) or The same folder (PC1-Beatles/The_Mistery_Magic_Tour) (PC3-Beatles/The_Mistery_Magic_Tour)...
Is there a way to contemplate this issue?
View 4 Replies
ADVERTISEMENT
Aug 4, 2010
i am using ps3mediaserver to expose my photos collection which is distributed across multiple sub-folders. unfortunately the ps3 can only show a slideshow for a single folder at a time, hence i was wondering if there was a quick way to create a single folder containing symbolic links to all my pictures.
View 2 Replies
View Related
Jun 18, 2010
I want to do something like svn add dir1 dir2; svn ci dir1 dir2 but have it be only 1 revision. Is there a way to do this? Is this the correct way to add new folders (with contents) to the repository? We are restructuring the trunk, so I cleared it out and plan on putting these directories with their contents in it.
View 1 Replies
View Related
Oct 13, 2010
I have question about the UNIX sockets. my goal is to connect multiple sockets from a single client to a single server and keep them open...I'm not sure if that is possible to create or not. Do you have any suggestion or an example of code?
View 1 Replies
View Related
May 28, 2010
In my production setup, i have 3 servers using the same mount point. However, i see that the IOPS is low. Does this kind of architecture have any impact on IOPS. In case it is neutral, how can i tune my setup for better IOPS.
View 1 Replies
View Related
Jan 20, 2011
We can add multiple IP address on a single NIC. Is there any limitation that is how many ip address I can add on a single NIC card??
View 1 Replies
View Related
Feb 27, 2011
have a look at the following thread story and please clear my doubt.
View 6 Replies
View Related
Dec 10, 2010
How to run multiple X server in single terminal in linux .Is it possible .
View 3 Replies
View Related
Aug 30, 2010
I am running Centos 5.5 with Apache 2.2.3, MySql 5, and PHP 5.1.6. I am migrating a Drupal installation to the default html folder for development purposes. I am very new to server management, and a bit lost.I want to install some other web sites on the sandbox server to experiment with before uploading them to a Production environment. Is it possible to have multiple html folders? Or to use symlinks to point to the folders where the other web sites will reside?
View 1 Replies
View Related
Jul 1, 2010
I am new in client server programming and i have written code for single server to single client communicating one port(3490). but i have no idea how my single server will be communicate with different client on different port.how this will be happen ?
Any idea to understand the logic or send any good link or any piece of code in c , i searched on net but all help was mostly for java progamming.
View 1 Replies
View Related
Mar 15, 2010
I am looking at setting up a multiple postfix SMTP servers for a single domain. Below is my requirement, I would appreciate if someone out there could guide me to achieve this using postfix..
1. Want to setup 2 postfix SMTP Server with 1 POP3 Server.
2. Server1 will host POP3 & SMTP services for domain "metallica.one".(IP: 1.1.1.1, MX: mx1.metallica.one)
3. Server2 will host only SMTP services for domain "metallica.one" (IP: 1.1.1.2, MX: mx2.metallica.one)
4. Server1 & Server2 will be used as load balancing for sending mails. (either manual settings in email client, or auto-loadbalancing is still preferred).
5. Mail received for domain metallica.one on Server2 should be pushed/forwarded/relayed to Server1 where POP3 services are running.
6. Outgoing mails for other domains from Server2 should be sent directly to the other-domain-recipients without relaying to Server1.
View 2 Replies
View Related
Feb 4, 2010
I have configured a file server with samba and winbind in RHEL5.I am able to allot permission for the active directory groups to my Linux folder.No issues.But i want to set multiple groups of active directory to get ownership to a single directory. Say there are 3 groups a,b,c to have permissions to a folder of the Linux machine.
Code:
chown -R root:Active_directory_group_name path_to_linux directory
I have set
Code:
chmod 770 /myshare
meaning that user and group would have full rights to /myshare
Code:
chown root:a
works great I tried with the option of
Code:
chown -R --reference=/etc/shares_own.txt /myshare
In reference file(shares_own.txt) i gave the entry as
Code:
root:a,b,c
This is not working.
View 7 Replies
View Related
Aug 4, 2010
Our system uses email to send fairly time-sensitive status messages between programs running on various servers on a WAN. Each email message is sent to two addresses (different servers). The problem occurs when one of the destination mail servers is off the network. I think because it's trying to send one email to two addresses, sendmail attempts delivery to the first address, then to the second address (i.e., serially). When this happens, it hangs for two connect timeout (CONNECT_TO) periods trying to connect to the offline destination, then after the timeout, it then delivers to the other destination. I'm trying to figure out how to work around that connection delay so it doesn't delay delivery to the other destination.
I'm working with the network guys to enable the right ICMP messages that signal when a network is unavailable, but I would also like to try having sendmail split the emails into two envelopes, then use parallel, independent connections for delivery.
After days of reading through the docs (O'Rielly Sendmail book + sendmail docs) I think one way to do this is to use multiple mail queues, but I can't decipher exactly how to do that from the docs.
There might be other, more elegant ways to do the same thing, but again, trying to decipher the docs has my head swimming. (This is my first experience with sendmail.)
View 1 Replies
View Related
Aug 25, 2010
I currently am running 10.04.1 and have successfully setup my home web server to run a single website. My current settings are:
-I have registered the domain name annarrankings.com through godaddy
-A record is - host = @ and points to = 71.114.220.3
-CName is - host = www and points to = @
-on my server I have the site running in /var/www
I've done some research and found that to run multiple websites I need to setup VirtualHost.
-So I created a folder /var/www/annarrankings.com and moved my site to that folder
-Edited Apache2.conf to add the following line
-I then went to /etc/apache2/sites-enabled and copied the default file to a new file called annarrankings.com. Here's the annarrankings.com file after I edited it
-I then created a link in /etc/apache2/sites-enabled to the annarrankings.com file in /etc/apache2/sites-available
-Next I editied /etc/hosts
-When i went to enable the site using a2ensite annarrankings.com I got the following
I figured this was ok since I had already created a symbolic link earlier (a result of trying to following multiple tutorials and ..... videos at once) so I reloaded apache2. I created an index.html file in /var/www/ just for testing purposes and when I load www.annarrankings.com I get the file located in /var/www/ instead of the website located in /var/www/annarrankings.com Do I need to change my A record or CName in godaddy or did I just do this completely wrong?
View 8 Replies
View Related
Jun 14, 2011
have a large amount of 7z files in multiple folders which I need to extract.The directory structure is like this:
/main-folder/
multiple subfolders/
1 or more 7z files per subfolder
I would like to get the output of this action in one separate folder, all together in 1 folder.How can I do this?
View 7 Replies
View Related
Apr 20, 2011
I have files a, b, c and d. They're all relatively large and are served up by a static web server optimized for this purpose. I can get requests that look like this:
/abcd
/ad
/bacdac
...
Each request is basically a request for a concatenation of the files in the order of the letters. The list of possible requests is finite, but large enough that disk space will run out very quickly and be very expensive if I create all possible files via concatenation.Is there a way to create a pointer file like abcd that is essentially a multi-file symlink that first points to a then to be then to c then to d? So if the contents of the files were as follows:
a: hello
b: there
c: whats
[code]....
View 3 Replies
View Related
Jun 3, 2010
I have downloaded the jdk-6u20-linux-i586.bin from their website. I also read the instruction given to install jdk manually but i was not able to run a single program. Can someone give a step by step instruction to install jdk and also tell me how to set the path so i can easily execute the programs.
View 9 Replies
View Related
Dec 8, 2010
I'm using Ubuntu 10.10. I want to copy all the pictures from various folders in my Documents to a single folder. So in Nautilus, I clicked on Places > Search for Files. Then chose the Documents folder and typed *.jpg in the search criteria. It found all of my pictures just fine. However it would not let me copy and paste them into a folder I put on my desktop. Copy is not on the "right" click menu and Ctrl C did not work for the highlighted search results. This is so simple in Windows but it does not seem to work in Ubuntu.
View 4 Replies
View Related
Nov 26, 2010
Code:
# echo $PATH
/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
How would i write a script to display permission on each folders in $PATH variable below format.
drwxr-xr-x 2 0 root 4096 Nov 24 14:51 /usr/kerberos/sbin
drwxr-xr-x 2 0 root 4096 Nov 24 14:51 /usr/kerberos/bin
This is what i did but since it require awk programming i m stuck.
Code:
ls -ld <directoryinpath>
Code:
# echo $PATH | awk -F ":" '{ print $1 }'
/usr/kerberos/sbin
View 4 Replies
View Related
Jan 23, 2011
I've been trying to set multiple IP my Fedora 14 but nothing seems to work. Upon browsing the net, I found there are two ways for it. One is eth0:0~eth0:n nd another is eth0-range0. All are configs under network-scripts. But neither of them worked for me. Even grabbing a working example from my live server doesn't do the trick (though the server is a CentOS 5.5).
Currently using eth0-range0
ONBOOT=yes
IPADDR_START=192.168.1.127
[code]...
View 2 Replies
View Related
Jun 29, 2010
I have an Ubuntu install on an 8Gb SDHC Card, customized for my Toshiba NB205. It took quite a bit to get sound and BT working, but now it's fine. Just out of curiousity, I used this same SDHC Card to boot my Dell D610 -- it booted, and sound and WiFi worked fine. I was surprised. There was a single error message after the desktop appeared, but I didn't record it.
I am now wondering: is it practical to use a single USB installation with multiple devices? I can imagine a number of complications, but was surprised that my attempt worked on two very different hardware platforms. There was discussion, when pendrives first appeared, of being able to use one to boot any PC to your own USB-based OS, bypassing any other OS installed on the PC.
View 4 Replies
View Related
Mar 6, 2011
Is there any limitation to the number of transactions through a single port if so then if we assign multiple port to that particular service then the performance is increased (what i suppose)
so: Is there any way to assign multiple Ports to a single service. like for a web server the main service is httpd or some thing like that to be running on the server and now if we assign multiple ports to that service then the performance increases.
View 2 Replies
View Related
May 8, 2009
I would like to know if I need multiple IPs' to setup two SSL urls on the same Apache server? Two ssl certificates, one IP - is it possible?
View 4 Replies
View Related
Jan 14, 2010
I've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.
View 8 Replies
View Related
Apr 5, 2011
I'm trying to disable multiple logins for a single user on Ubuntu 10.10 but I haven't been able to find a way to do this on this version
View 4 Replies
View Related
Apr 23, 2011
One of the things I wanna do is create a partition which spans across multiple HDD's. is this possible? would I need to cluster the HDD's first then add the cluster to the partition?
View 3 Replies
View Related
Jul 26, 2011
I'm using my home server to netboot into live CDs. To summarize that article, netbooting a liveCD system involves passing an NFS host:/path in kernel's command line, which is subsequently mounted as /cdrom on the live system. The article mentions copying the contents of the iso image to a place on the hard drive, but I see no reason for this, since the contents need to be read-only anyway, which is easy to achieve by mounting the iso through a loop device:
Code:
# mount
...
/dev/loop0 on /mnt/kubuntu-lucid-amd64 type iso9660 (ro)
/dev/loop1 on /mnt/kubuntu-natty-amd64 type iso9660 (ro)
[code]....
Now, I am using NFS to mount a regular (rw, HDD) directory which I use as a network drive and I can mount any subdirectory and still access all the files within, ie. when I export /data on the server, I can still mount /data/downloads on the client:
Code:
server:# exportfs
/data 192.168.1.4/32
client:$ sudo mount -t nfs 192.168.1.1:/data/downloads /mnt/netshare
[code]....
Is it possible to export just /mnt and be able to mount any/all of the subdirectories? NFS doesn't like going across multiple file systems:
Code:
server:# ls -al /mnt/kubuntu-natty-i386/
total 3532
dr-xr-xr-x 11 root root 4096 2011-04-27 11:29 .
drwxr-xr-x 7 root root 4096 2011-07-25 21:46 ..
[code].....
When I try to export just /mnt and mount /mnt/kubuntu-natty-i386 on the client, the mount succeeds but the mounted directory is empty.
View 1 Replies
View Related
Aug 24, 2011
I am using DVD::rip to convert some instructional DVD's to .avi (xvid + mp3). I have never used this app before but its seems fairly straight forward and easy to use. I am able to convert 1 title from the DVD to 1 avi file. One DVD however has 19 titles which vary from 3-5 minutes in length. My question is, can I convert all or at least some titles to a single .avi file and if so how?
View 1 Replies
View Related
Apr 20, 2011
Can ANYONE point me in the right direction on how to use storage on multiple servers as a single cluster?I thought storage cluster was for that but, after much googling, and even more help from here, I don't think that achieves my goal. My goal is to have multiple servers share a file system, to act as somewhat of a network raid, so if node-A goes down the files are available on other nodes, and hopefully so when the capacity of the nodes are reached I can add nodes to expand the "cluster".
View 6 Replies
View Related
Jul 8, 2010
I know a fair amount about setting up a simple network but I'm curious about setting up a more complex topology...For example...A "box" has two NIC's acting as a bridge, normally this would involve two distinct networks (ie. 192.213... and 192.214...) is it possible that this physical set up can create a single network (192.213... 192.213...) resolving IP's from either a DCHP on the "box" or a DCHP server somewhere else on "one side of the box"likewise with differing physical network types, a "box" with a NIC and a TCP/IP over usb setup connected to another device with TCP/IP over usb (OTG/Gadget) so that all the IP's are on one logical network.
View 1 Replies
View Related
