Server :: Monitor Server Snmp Read From Logs Parsed Possible?
Jul 21, 2009
I would like to monitor a RedHat via snmp. I would like to make available data via snmp. The data that I would like to graph are only present in logs file. Is it possible to parse data from applicative logs and have them available for my cacti server via snmp? I already monitor CPU, mem, and others with cacti using the standard MIB.What would be the logical step I would need to achieve that?
View 1 Replies
ADVERTISEMENT
Mar 27, 2010
I am using orion snmp monitor in my network and I have no problem with windows systems but linux systems have some problem first of all snmp monitor shows cpu load on 100% all the time that is completely wrong and secong my snmp monitor can just show cpu and memory and response time information of linux systems and not disk information and nothing more. this is my /etc/snmp/snmpd.conf file content:
com2sec paranoid default public
group MyROSystem v1 paranoid
group MyROSystem v2c paranoid
group MyROSystem usm paranoid
group MyROGroup v1 readonly
[Code]....
View 8 Replies
View Related
Jun 1, 2011
I am new in perl, i have a question i.e 'How to read individual logs from linux server into another log file using perl script', I need to capture the individual logs from different paths and output the result of those log files and store to a file in another location.These Logs are generated in Linux Server..
View 2 Replies
View Related
Feb 26, 2010
I have been using Postfix since 2006 with no problems ever. Simple & rock solid however I was wondering what you guys use for monitoring all your email traffic and logs? Is there an application or utility you guys suggest using as a mail administrator to easily scan / view logs in a organized and clean view?
View 1 Replies
View Related
Aug 12, 2010
I'm trying to configure SNMP service to send traps to SNMP server. I've installed net-snmp-utils, now I need to configure the "snmpd.conf" file...
View 2 Replies
View Related
Jan 15, 2010
policy is to backup mysql with mysql-zrm.However at a certain stage it hangs forever. This is at the "flush logs". I tried this manually and it gave the same result. Even after restarting mysql and the host. After some googling and trying I found out "flush tables with read lock" gives the same result. The tables seem to be MyIsam. I tried with a mysqldump on one server and restore it on a test vm. I used the same config and flush logs still hangs. ALso I tried to change some configuration directives... but with the same result
Edit: btw, I checked the logfile and didn't found anything (/var/log/mysqld.log)
Edit2: I also did myisamchk -s *.MYI (in all direcoties with db files;actually did it with find command) and it did not return anything so datafiles seem ok.
View 4 Replies
View Related
Jan 26, 2011
I am trying to configure SNMP server using xinetd on red hat. I am using non-standard port for it. My connection to server fails. I see the following log messages in /var/log:
Jan 26 17:23:31 [userid] xinetd[15023]: START: my-snmp pid=15047 from=192.128.11.21
Jan 26 17:23:31 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15047 duration=0(sec)
Jan 26 17:23:32 [userid] xinetd[15023]: START: my-snmp pid=15050 from=192.128.11.21
Jan 26 17:23:32 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15050 duration=0(sec)
can anybody help to point out what is wrong in my config?
[Code]...
View 1 Replies
View Related
Feb 12, 2010
I have installed opennms and net-snmp-5.5 in ubuntu9.10.Both are working properly but, i dont know how to get snmpwalk,snmpget,snmpset outputs in opennms.
View 3 Replies
View Related
Feb 16, 2011
How to install and config SNMP in my CentOS Web Server
View 1 Replies
View Related
Oct 5, 2010
all I want is for my server to send hardware alerts to the snmp manager.
Is a snmpd.conf like this ok?
rwcommunity name1
rocommunity name2
trapcommunity name3
trapsink ip_of_manager
syscontact me
syslocation my_addr_and_phone
[Code]...
View 2 Replies
View Related
Jul 11, 2011
I am having trouble getting nagios to work with snmp using the 'check_snmp' plugin.I am trying to run the plugin from the terminal and getting:
Code:
root@NAGIOS:/usr/local/nagios/libexec# /usr/local/nagios/libexec/check_snmp -H 172.xx.xx.x -c nagios -o sysDescr.0
[code]....
View 2 Replies
View Related
Jul 27, 2011
i tried to configured snmp configuration for opennms monitoring tool to get disk alert ..when i entered the following command i doesint receive any sysobj id can somebody say how can i get my sysobjid in centos 5.4
View 2 Replies
View Related
Sep 20, 2010
I installed MRTG some hours ago. Everything works fine (disk, cpu,..), except the network graph.
For this graph, it's only work for ~3 cycles (15min), then... nothing.
This is the part of mrtg.cfg:
Code:
The number for eth0 is 3
Code:
SNMP is running:
Code:
Crontab is configured for mrtg (and seems it's not the problem because the other graphs works well):
Code:
In attachement is the graph for the memory (working!) and .. for the network, as you can see, only one small pic at the beginning.
View 1 Replies
View Related
Jan 22, 2010
finnaly i can run my ubuntu server 9.04 well, thnx to this great member of ubuntuforums.org now, i wanna i wannna install SNMP on my system, but after i do that, when i wanna connect with another client, it give me error like this :
Code:
no response received
SNMPv1_Session (remote host: "10.100.7.179" [10.100.7.179].161)
community: "public"
request ID: 862383236
PDU bufsize: 8000 bytes
[Code]...
10.100.7.179 is my client, i allready install snmp agent on it. but why still eror then? plz give some help. thnx before
View 1 Replies
View Related
Jun 16, 2010
I am looking to build a dedicated syslog-SNMP server with remote web interface and I would appreciate a discussion from our community on recommending the best solutions to deploy. I would like to be able to create an opensource architecture I could easily duplicate for multiple stand-alone customer environments.
View 1 Replies
View Related
May 8, 2010
I have debian Lenny as an server I would like for monitoring of some network components ( switches, printers, routers ... ) and at
/usr/share/snmp/mibs I have
/usr/share/snmp/mibs# ls -l
total 1844
-rw-r--r-- 1 root root 17455 2008-12-16 18:22 AGENTX-MIB.txt
-rw-r--r-- 1 root root 36576 2008-12-16 18:23 BGP4-MIB.txt
-rw-r--r-- 1 root root 36959 2008-12-16 18:23 BRIDGE-MIB.txt ....
ls -l | wc -l shows 66, what means 66 differen mibs.
snmp related packages I have installed are as :
dpkg -l | grep ii | grep snmp
ii libgsnmp0 0.2.0-2.1 an SNMP library implementation based on glib and gnet
ii libsnmp-base 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) MIBs and documentati
ii libsnmp-perl 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) Perl5 support
ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) library
ii snmp 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) applications
ii snmpd 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) agents
My question is, how I can install additional mibs ( for Cisco, Procurve, etc ) for other hw I could have ? What is procedure. I browsed debian package base and I could not find some more packages related to snmp that could supply more mibs.
View 3 Replies
View Related
Dec 13, 2010
We have a situation where we have to set up a server to send traps with information regarding CPU, memory usage, etc. I know snmpd can be set up to allow another process to request snmp information about the server, but can it be done the other way around (have a host send information about itself to another server through snmp)?
View 4 Replies
View Related
May 5, 2011
My Objective is to add Private MIB and compile that file and perform snmpget and snmpset operation. My MIb file contain this macro
[Code]...
Next I try to cmpile using mib2c highCpuUsage. it's give template code for that. I read all the tutorial and copy in /mibgroup and restart snmpd service and try snmpwalk ,snmpset but it�s not work and in var/log/messages its give Out of Memory: Killed process 8005 (snmpd)
View 2 Replies
View Related
Oct 24, 2010
I Have RHEL4 running on IBM X3550 server, we request IBM support regarding issues with this server, they will request for IBM DSA logs. The logs are quite extensive and cover almost all server config & can identify hardware issues with drivers...etc. I want to know if there is a way to analysis those logs offline without sending them to IBM support?
View 3 Replies
View Related
Jul 14, 2011
I've a popular vbulletin forum (10k max in vbulletin stats 'whos online') runnin in two servers like this:
1) Web server running vBulletin.
Dual Intel E5620 @ 2.40GHz (shows 16 cpus)
12 GB RAM
2 x 500 GB SATA (one for system/web and other for backups)
CentOS 5.6 64 bit
Apache/2.2.17
PHP 5.2.16
2) MySQL 5.server
Dual Intel E5620 @ 2.40GHz (shows 16 cpus)
16 GB RAM
2 x 500 GB SATA (one for system/web and other for backups)
CentOS 5.6 64 bit
MySQL 5.0.77
Web server connects to MySQL using private LAN.
Web-php server works with xcache as recommended by vBulletin.
Image/avatars and other static files (css, js, etc) are on a CDN
MySQL server uses Memcached for caching common queries.
The problem I'm facing, is from time to time (let's say one or two times a week) the Web server goes into read only mode... then the server has to be rebooted in order to get online normally and be able to work. From the logs I've seen this:
Code:
This is a new server, and in the old server the 'read only mode' issue happened very often too... so I guess it's not a HD issue.. it's just the HD have a heavy I/O usage. What do you think?
I am thinking about this solutions to improve the webserver performance:
1) 75% of the vbulletin users are anonymous users, so I've been thinking about using Cloudflare as a cache for all that traffic, that would reduce the php-webserver process a lot.
2) Using an external email server is a good option I guess... as right now the webservers also handles the email notifications for all the vbulletin users and it is constantly sending email everywhere. So, email will be stopped to gain server performance.
3) Mounting partitions with 'noatime' at /etc/fstab seems to improve I/O performance.
View 3 Replies
View Related
Jun 3, 2010
Is there an app I can put on my website hosting server that will do the following:
1. Allow the user to view a DVD.
2. Pause / stop to view something in more detail.
3. Rewind to view something again.
4. Mark location so they can return to viewing in the same place at a later time.
I belong to a fly fishing club. We have tapes of fly tying sessions dating back to 1992. Since we are registered as an educational charter with the state, I would like to make the available to our web sight viewers for learning.The club owns all these tapes and they were filmed at club sponsored functions. There should be no copyright problems. I am in the process of converting them to digital.
View 1 Replies
View Related
Jun 10, 2011
How to get the Q2 patching logs of particular server (Linux 2.6.9-100.EL)
View 1 Replies
View Related
Jan 11, 2010
how to find logs in hp-ux server why it get unexpected shut..down is any hardware failure or or its been hard boot
View 3 Replies
View Related
Aug 25, 2010
I was wondering how could I specify for how long the logs will be kept. Rsyslog doesn't have such an option (at least I didn't find it).Do I have to use logrotate for this, or is there some other option?
View 1 Replies
View Related
Oct 5, 2010
how to check maillogs for previous days. wht is command to check log for yesturday in sendmail8.14 .fedora os i know /var/log/maillog.this gives o/p for today but wht abut yesturday.?
View 10 Replies
View Related
Mar 9, 2011
Iam looking security specific event ID on Linux .hear are thousnds of event ID in Microsoft Windows/XP and VISTA etc. Similar way looking for Linux,unix ,Solaries,AIX etc event ID. I would to correlate and implement with Arcsight.
View 2 Replies
View Related
Apr 19, 2011
We are forwarding logs (perl script executed logs) to one Red Hat Linux box. We have to get 97 logs for each time the script runs. But we see inconsistent number of logs coming to Linux box. Like one time we got 56, other time 3 , other time 43.. like this.. We are sure that 97 logs are being forwarded. Checked the Rsyslog.config filer any filters and couldn't see any filter dropping them. When we run the tcpdump, we can see 97 connections, but logs are not there in specified location.
View 1 Replies
View Related
Oct 20, 2010
how to setup logs in Vsftpd? I have default configuration in CentOS but its not log`ing
View 1 Replies
View Related
Jun 24, 2011
Do you guys know any free tools to monitor a server ? Something like Nagios or Zenoss but free. If so what's a good one that you guys would recommend ?
Can it be setup on 3 ubuntu servers running KVM ?
View 3 Replies
View Related
Apr 18, 2010
I hope the server forum is the best match for my post, otherwise please redirect me.
I have a Fedora 12 Desktop machine running at a remote site and have no keyboard not a screen connected to it. After rebooting it remotely I was surprised to learn the machine did not come back up again. (It did when I tested it while I was on site).
[Code]...
View 3 Replies
View Related