Server :: DHCP3-Server Giving IP Addresses Depending On MAC

Apr 11, 2011

I have dhcp3-server (isc-dhcp-server) installed on my Debian and now I got a question about how it's giving the IP addresses to new devices.

For example: I connected my laptop and dhcp server gave me 192.168.1.5 address. Will it always give me the same ip address when I connect my laptop or it will eventually change after some time (week-month)? If it's not changing it, then I am wrong about this.

BUT...If I am somehow correct and if it will change in a week and give me another random (like 192.168.1.8) IP even I won't change my laptop network adapter, is it possible to configure dhcp server to always give same IP address depending on what MAC it is?

To make it clear, I want that when I connect new device (new laptop/pc) dhcp server would give it random IP but same time it would note the MAC address and never change the IP on that MAC.

I know about MAC filters, but setting filters is when you know MAC address since beginning and want to assign IP for it, but in my situation I don't know the MAC address.

View 4 Replies


ADVERTISEMENT

Ubuntu :: Server DHCP3 Stopped To Give Addresses / What To Fix It?

Mar 7, 2011

I'm writing because my ubuntu server has started with troubles .
It's running Linux 2.6.32-29-generic-pae kernel for ubuntu server 10.04 and after the last update it stopped from giving addresses on clients connected.
Dhcp3 server it's running and the conf files are fine, but i can only use static addresses assignation now...
Also MYSQL has stopped working (installed for Bacula purpose) but now the dhcp problem is the biggest issue. I work in an office where dhcp is fundamental, too much clients (about 15) that are personal laptops also (so static assignation for clients is not a good choose).
Please any one could help me? It's two days I'm trying to figure it out without success.
also tried removing and reinstalling dhcp3-serer...no way.
Here are my conf files code...

View 1 Replies View Related

Debian Configuration :: DHCP3 Server Giving Wrong Ip Address?

May 20, 2011

Hey guys. I have a client computer PXE booting from my host computer and it is supposed to give the client the ip address 172.16.0.100 however instead it gives it the ip address 172.16.0.208.

I have this set up working with two other computers and there is no noticeable difference other than mac addresses for the network card.

Here is an extract from my '/etc/dhcp3/dhcpd.conf' file...

ddns-update-style-none;
option domain-name "example.org";
default-lease-time 600;
max-lease-time 7200;

[Code]....

I have quadruple checked the mac address of the client and it is definitely "00:07:E9:32:16:81" so why is it not giving it the IP address that I have specified?

View 2 Replies View Related

Ubuntu Servers :: Dhcp3-server Fails To Start - Can't Open /etc/dhcp3/dhcpd.conf: Permission Denied

Oct 1, 2010

I installed dhcpd using:

Code:

Now when I try to run it, I get this weird error:

Code:

The error was:

I changed permissions to 777:

Code:

To no avail!

It's got something to do with AppArmor.

I don't think it is installed on this system:

Code:

View 1 Replies View Related

Ubuntu Servers :: Display The Addresses That Have Been Issued By My Dhcp3?

Jan 1, 2011

I want to display the associated host name with each address.

I've found the /var/lib/dhcp3/dhcpd.leases file, but it appears to have an entry for every time a lease was issued so it's hard to tell which ones are currently active.

View 3 Replies View Related

Server :: Unable To Connect Samba Server From Other Pc Giving Error NT Authentication Failure

Jul 28, 2010

I am not able to connect samba server from other linux pc giving error: NT Authentication Failure

But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.

View 3 Replies View Related

Server :: DNS Fail: Can't Resolve Subdomains, Server Giving Wrong Response?

Jul 13, 2010

I've got a DNS problem I cannot figure out. I've been digging and pinging all day and I've waited for caches to expire and I'm not having much luck.From my desktop mac, I can't seem to resolve mail.port-o-call.net:

Code:
My-Mac:~ sneakyimp$ ping mail.port-o-call.net
ping: cannot resolve mail.port-o-call.net: Unknown host

[code]....

View 4 Replies View Related

Ubuntu Networking :: DHCP3 Server Won't Start?

Feb 1, 2011

I have followed the ubuntu guide for setting up a dhcp3-server server for my internal network, I have installed dhcp3-server, configured it refuse to start, here are some background:This is my /etc/default/dhcp3-server:

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/dhcp3-server by the maintainer scripts

[code]....

View 9 Replies View Related

Ubuntu :: Can't Start Dhcp3 Server Errors Are Come?

May 3, 2011

I'm using ubuntu 10.04, Im going to setup LTSP sever, But I cant start dhcp3 server this errors are come, how can I fix this this error comes when I tried to start dhcp3 server

lachitha@lachitha-desktop:~$ sudo /etc/init.d/dhcp3-server start

[Code]...

View 9 Replies View Related

Networking :: Cannot Get DHCP3-Server To Work Under Ubuntu 9.10

Jan 7, 2010

I've never had this much trouble, but maybe it's because I have not setup a dhcp3-server in some time.

My server has three NIC cards. The Internet connection is on eth2, and I'm trying to get connect other computers to the server through eth0.

It's suppose to be relatively easy, unless I'm assigning specifics, right?

Code:
#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Disable Dhcp3-server On Startup?

Jun 26, 2010

I have an old Linksys WUSB54G USB wireless card lying around, and occasionally I like to use it as an access point for my laptop. For assigning IP addresses I use dhcp3-server. The only problem is that the server attempts to start itself up on boot, which I do not want- I want to start it up manually if I need it. how to disable this service on boot?

View 9 Replies View Related

Ubuntu :: Dhcp3-server On Computer Doesn't Respond?

Sep 11, 2010

I need to create a network boot from 1 laptop to another, with a crossover ethernet cable between them, no routers no nothing, my computer is supposed to be the server. I followed half dozen tutorials over the internet but I think my major problem is with the dhcp serverfollowed this tutorial[URL]but when the client boots it makes several dhcp requests but doesn't respondwireshark capture looks something like this until the client times out

Code:
1 0.000000000 0.0.0.0 255.255.255.255 DHCP DHCP Discover - Transaction ID 0x200d8ad

[code].....

View 7 Replies View Related

Networking :: Selective Dns Server Depending On User?

Jul 22, 2010

configure which dns the system will consult depending on which user iniciated the request.My goal would be, if user "peter" is logged in and has opened the browser, that requests for name solves from that user goes to certain/s dns server/s. And if user "anne" is logged and request name resolution, that request should be done to another dns server.To say it briefly, the idea would be configure selective dns server use depending on system users.

View 13 Replies View Related

Ubuntu Servers :: Setup A DHCP3-server On Brand New Learning 11.04 ?

Jun 3, 2011

I been trying to set up a DHCP3-server on my brand new learning Ubuntu 11.04 server. I can connect when i put the IP infomation in manually, so I know everything else is working, just got to fix the DHCP problem before I put the machine into production on my home LAN. Can someone tell me if these config files located at /etc/dhcp3/dhcpd.conf and another at /etc/default/dhcp3-server are correct? eth1 is the NIC that will be the LAN side of the network, I double checked that...

Code:
/# A slightly different configuration for an internal subnet.
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.10 192.168.10.200;
option domain-name-servers 8.8.8.8, 8.8.4.4;
option domain-name "linuxrouter.local";

[Code]...

View 7 Replies View Related

Networking :: DHCP3 Server - Setting Double Range Of IP Address

Apr 27, 2010

I would like to set a double range of IP address with my DHCP3-server. Now, I have eth0 (which is my only network card) with this IP address : 172.16.93.1 and I have created a second interface eth0:1 with this address: 192.168.3.1. The goal is to give an IP address 172.16.93.X to phones (with option 66) and the IP address 192.168.3.X to the computers.

This is my DHCPD.conf :
ddns-update-style none;
option domain-name "mycompany.com";
option domain-name-servers 172.16.93.1;
default-lease-time 3600;
max-lease-time 2347200;
authoritative;
log-facility local7;
option ip-forwarding off;
default-lease-time 20;
max-lease-time 20; .....

Right now my DHCP server work fine, (I means, no error at the startup ) but the server give always the same kind of IP address, whatever if it's a phone or a computer. I notice something "wired", if I put the :
subnet 192.168.3.0 netmask 255.255.255.0 {
range 192.168.3.100 192.168.3.199;
option routers 192.168.3.254; }
(Which is first in the dhcpd.conf) after the "subnet 172.16.93.0 netmask 255.255.255.0", the server will give IP address 172.16.93.X at all the clients. Is it possible to give more than one IP range with one network card at the same time? And how set the option 66 to only give IP address (172.16.93.X) to the phones?

View 4 Replies View Related

Ubuntu Networking :: Dhcp3-server Is Not Committing Correct Dns-address To Win XP Client?

Oct 15, 2010

I'm troubling setting up my dhcp3-server.Although I've configured "option domain-name-servers 192.168.1.1" in my dhcpd.conf my windows-xp-clients dns-server address is set to 192.186.1.1.This is strange! All other things seem to work correctly.This is my dhcpd.conf:

Code:
ddns-updates on;
ddns-update-style interim;

[code].....

View 3 Replies View Related

Server :: Send Traffic Down WAN Link Depending On Client IP Address Range?

Apr 15, 2011

I am running Debian Squeeze with the following basic services running:DNS
DHCP
Samba
Squid

The server is setup with three NICs: eth0 (WAN1), eth1 (WAN2), and eth2 (LAN).The server addresses clients with an IP range of 10.0.30.1 - 10.0.30.254. Some clients will be set with reservations so they fall into the 10.0.40.1 - 254 range.

What I want to do is have any outgoing external traffic coming from the first range (10.0.30.0) to use WAN link 1, and any outgoing external traffic coming from the second range (10.0.40.0) to use WAN link 2.

I have sort of got something working. I have created a bare minimum transparent squid3 setup on port 3128, and set the iptables as follows:

Code:
iptables -t nat -A PREROUTING -i eth2 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:3128
iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128
iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128

I can get internet access, however obviously it only goes through one WAN link. It also seems slower than it should be. I experimented with tcp_outgoing_address, but seemed to not be my friend.

View 4 Replies View Related

Ubuntu Installation :: After Re-installing Mysql-server-5.1 - Giving Error Message At End Of Installation When Trying To Start Server

Mar 3, 2011

I'm using Ubuntu 10.04 LTS - the Lucid Lynx.

I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".

But its giving error message at the end of installation when its trying to start the server.

The error message is as follows.

When i tried to start the server after the installation, i get this error message

Note : The file "/etc/mysql/my.cnf" is empty.

View 1 Replies View Related

Server :: Nginx Giving A 403 Error?

Feb 6, 2011

I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.

View 2 Replies View Related

Server :: Giving SSH Access To Machines On LAN From Internet?

Mar 7, 2011

I am having a server in a corporate data centre. There are some virtual machines running on it.The main server is accessible from internet via SSH. There are some people who within the lan access the virtual machines whose IPs on LAN are

Quote:
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4

from internet only one host is allowed SSH. This machine has public IP and is also connected to LAN on the IP 192.168.1.50. Tunnel is not allowed on our network.So now I am came across a solution as explained on this link. I am not clear with on which machine .ssh/config file I add following

Code:
Host securehost.example.com ProxyCommand ssh user1@insidemachine.com nc %h %p Should above be done on gateway where public IP and ssh is allowed or client on internet who has to login. Do I need to create separate accounts on the gateway also so that the users who can SSH to gateway then are forwarded to inside machines? Or one account on gateway is sufficient for different people logging in via internet to my gateway and then forwarded to internal machine?

Then do I need to create an account user1 on the gateway also?

1) What is the correct syntax for ProxyCommand on gateway's .ssh/config should I use

Code:
ProxyCommand ssh user1@inside.machine nc %h %p
or I should use
Code:
ProxyCommand ssh user1@gateway.com in nc %h %p

2) Should I create new user accounts on gateway also which exist on internal machine?

View 4 Replies View Related

Server :: Multiple Command In Ssh Giving Error?

Apr 23, 2011

I have prepared a script which will login to each server and search for a keyword.I want output on same machine from where m running script.When i try to run command on any machine.. It works well.

w=$(grep -irH "keyword.com" /home/*/public_html/*);if [ $? -eq 0 ];then echo -e "
$HOSTNAME";echo $(grep -irH "keyword.com" /home/*/public_html/* | cut -d: -f1 | uniq | awk '{for (i=1;i<=NF;i++) printf "%s

[code]....

View 3 Replies View Related

Server :: NTPD Giving Non Local Time - How To Set

Feb 10, 2011

NTPD on Fedora 14.

View 2 Replies View Related

Server :: CentOS 5.5 - Fuser Not Giving Any Result

Oct 29, 2010

When I check socket on my box (Centos 5.5) I notice a strange behavior:
fuser 80/tcp
fuser -4 80/tcp
fuser -6 80/tcp
don't give me any result. But apache is running!
tcp 0 0 :::80 :::* LISTEN 25960/httpd

View 2 Replies View Related

Server :: Set Virtual_alias_domains For All Domains And Addresses?

Apr 28, 2010

I am looking for a code for setting virtual alias for all domains and addresses. The scenario is that when I send an email from anywhere to my server, it will send to only one address but not send to the orginal recipient.

This is my code: I think the problem may be from the regular expression (.*) for any domains/email addresses

/etc/postfix/main.cf:
virtual_alias_domains = (.*) <-----
virtual_alias_maps = hash:/etc/postfix/virtual
/etc/postfix/virtual
(.*) admin@myserver.com <----

View 2 Replies View Related

Server :: Using Some Application To Block IP Addresses?

Feb 16, 2011

now I have managed my rsyslogd to log the firewall into a separate file I would like to use a script which looks into this file for intruders which for example try to ping, telnet, ssh, rdp etc into my dsl connection.And then use a kind of app or firewall on my ubuntu server to block them.Yes my firewall logs them but does not block them if the policy is enabled, so they have access on through the firewall and the connect to my server but I only want some known IP addresses have access through it and this I cannot program in the firewall so I have to use some extras.Or am I thinking way to far and is there a better solution with IPtables or app?Is it possible to watch tcp connections between the firewall from outside IP addresses and the ubuntu server?

View 7 Replies View Related

CentOS 5 Networking :: Add Further IP Addresses For Server

Mar 16, 2010

I'd like to add further IP addresses for my server but I don't get it. My steps :

[Code]....

View 19 Replies View Related

Ubuntu :: Server Static IP Setup But Still Giving Dynamic IP's

Mar 21, 2010

I have setup like instructed in online tutorials.

Here is a copy of my interfaces file:

Code:

Code:

View 9 Replies View Related

Server :: Login Incorrect Even After Giving The Correct Password?

Aug 3, 2010

One of my servers is displaying the error as login incorrect even after giving the correct password. Once I restarted the Virtual Machine and after that it is accepting the same password to login. I am not able to find out the problem, why the server is not able to validate the password until the virtual machine gets rebooted.

View 2 Replies View Related

Server :: Mount - Block Device Giving Read Only

Mar 15, 2011

I want to keet some data on windows dir. I have tried the below command and giving the below error.
[root@xyz0044 ~]# mount -t cifs //10.48.64.52/jata -o username=domainv.kumar3,password=xxxx /mnt/backup
mount: block device //10.48.64.52/jata is write-protected, mounting read-only
mount: cannot mount block device //10.48.64.52/jata read-only

View 9 Replies View Related

OpenSUSE Network :: Set Multiple IP Addresses Onto Server?

Jul 23, 2011

I want to set multiple IP addresses onto my server and I can then put under an alias.

But is it possible to somehow create a script in perl example that can do this for or is it only possible manually?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved