I would like to setup grsync to auto backup me xp desktop and win7 laptop.I have setup samba and can access the directories on the ubuntu server.I can see the desktop and laptop on the network from the server.But when I try to find the machines i want to backup in source in grsync they are not there.What should the permissions be on the windows machines?
View 3 RepliesI'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
I ve task to take a back up a folder from remote server,i wrote a script for create a file with extent ion of .tar.gz but i got an error is given below in red color font.
servicepath="/etc/httpd/"
service_name="httpd"
country="TW"
cur_date=`date +%d-%m-%Y`
extention="tar.gz"
filename="$service_name-$country-$cur_date-$extention"
`tar -czvf $filename $servicepath`
[Code]....
Finally i need sloution for that error and a script to copy the tar.gz file in to remote server
utility to let me automatically apply shell commands I type to a list of given remote machines? I'm configuring and maintaining multiple servers all running Fedora 12 and I want them to have exactly the same configuration. I also need to check out code from subversion onto these machines; the same code from the same location into the same directory. I know I could use ssh to run each command individually for each machine, but is there a tool that will make this much easier?
View 3 Replies View Relatedrecommend a utility to let me automatically apply shell commands I type to a list of given remote machines?I'm configuring and maintaining multiple servers all running Fedora 12 and I want them to have exactly the same configuration. I also need to check out code from subversion onto these machines; the same code from the same location into the same directory. I know I could use ssh to run each command individually for each machine, but is there a tool that will make this much easier?
View 6 Replies View RelatedI'm looking for a solution for running C++ objects on remote machines from one C++ application.
View 2 Replies View RelatedI need to get some information like cpu usage,free memory,swap memory and other information from a bunch of remote hosts.Can any one tell me of a good perl module which does that.I dont want to use Net::Rsh or Net:SSH.
View 14 Replies View RelatedThe geek-in-me won and I bought a spiffy little Acer Aspire One netbook, windows 7 starter installed. Now I take it to clients' workplaces instead of my 19" laptop (that I also bought because the geek-in-me won that time too).
So what do I install in the Suse/openSUSE range? I want a lightweight Linux, like Meego or openSUSE with a light Desktop. I need to be able to use remote connections like RDP and VNC to both Linux and windows machines, so maybe Meego can't do that? But maybe openSUSE with a very light Desktop will. I'll use gmail from the netbook, no need for Thunderbird etc. I like to have multimedia.
Hi,Very new in Linux,Working on Ubuntu 10.10 but i want to remote to my windows machines to use outlook 2007 from Linux box,How do i do that.
View 3 Replies View Relatedif this a simple question I apologise, I'm using a SSH connection to a remote machine which also has ubuntu installed, my remote machine is connected to a windows server, using <places> <Network> and clicking on the server, doing this mounts the server into my remote file systemWhen i look around the file system of the remote machine i'm unable to make the windows server resource available to me.I Assume it has a service file in the /dev directory, but would not know what its called or what i would have to do with it.In the mean time i've managed to connect directily to the server from my local machine, (which is probbialy a better solution) but is it possible to see the server via my remate machine?
View 4 Replies View RelatedI just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedI was working over ubuntu 10.04 and while updating packages for my own purpose i needed to delete older versions of some packages. Unknowingly i deleted some packages it caused me to remove icons like rythmic sound box, video player, audio recorder and some more. Among those REMOTE DESKTOP icon also got removed from preferences. please suggest me how to get back those all into preferences. Is there any updates like making system to getback for default state
View 2 Replies View RelatedI can ssh from my local machine (Ubuntu 10.4 64bit) to a remote Linux server. When I try to copy a file back to my machine (or just ssh to my machine) I get the following error - "port 22: No route to host".ifconfig on my local machine gives one ip address for "lo Link encap:Local Loopback" and one for "wlan0 Link encap:Ethernet"; I tried ssh both.I work on a laptop with a wireless router (which is also the modem)
View 6 Replies View RelatedI'm using Ubuntu 10.10 64-bit and I'm a fairly new linux user. I've been trying to set up Grsync to to make incremental backups to my external harddrive but have some problems. In the file lists it looks like files are actually being copied but when I look at the harddrive none of the new files are actually there. As far as I can understand I'm not making a dry-run. I also found this thread: [URL] And I tried using the commands suggested in that post, with the same results.
View 9 Replies View RelatedI installed a server called Oracle VM Manager, which is actually a web based application to manage Oracle VM server.After successfully installed everything, it suppose to be access by browser using But strange thing is, I can see web pages from the server itself with but any other machines to access it with hostname or ip address all failed.
View 2 Replies View RelatedI am running version 5.5. I am using Grsync to back up 2 folders to an USB external 1.5 terabyte drive. Sometimes grsync backs the folders up correctly but most of the time, I need to unmount and then mount the drive to get it to work.
View 5 Replies View RelatedI've been using grsync to backup my home directory to an external drive (connected via USB), but lately I've been getting errors very early in the process and I was hoping someone might be able to help me fix them (or at least understand what I'm doing wrong).
Here's the output of a window titled "rsync: stopped" and in red "completed with errors!"
rsync: write failed on "/media/LaCie/myhomefolder/.cache/champlain/osm-mapnik/6/12/23.png": Input/output error (5)
kyconway/.cache/champlain/osm-mapnik/6/12/26.png
rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8]
rsync: connection unexpectedly closed (486 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8]
Rsync process exit status: 12
I am still struggling with implementing my exclusions, from this thread:url
Backups via Grsync are OK, but I want to exclude a bunch of hopefully-useless stuff, like thumbnails, trash, cache etc.
It looks easy here:
url(last post)
url
So I had a first attempt, to exclude the ".thumbnails" folder.I created a text file "exclusions" in "/home/me/.grsync".In that file, I wrote "-.thumbnails/".In Grsync Advanced Options, I wrote "--exclude-from=/home/me/.grsync/exclusions".Simulation results showed no red errors but no good results.Execution showed the .thumbnails folder still present.
I tried manually deleting the .thumbnails folder from the backup & rerunning Grsync, but it puts all the thumbnails back.
I changed the "exclusions" file to say just "-.thumbnails" (I really am not familiar with CLI syntax) but that does not work either.
I'm trying to backup a whole startup disk to another with GRSYNC but I don't need some files or directories. For example, I don't want to backup my 'swapfile1' (I do not have a dedicated swap partition) or the 'media' directory' in order to no enter a looping sync.I've searched the web for the correct syntax of the --exclude command but none have worked if applied in the advanced option "before" rsync starts. These a sample of NOT workin syntaxes:
exclude /media or -- exclude 'media' or -- exclude "media"
same for swapfile1:
exclude swapfile1 or -- exclude 'swapfile1' or -- exclude "swapfile1"
I have a DNS server on my LAN at 192.168.140.25. Going by the example in the O'Reilly DNS and BIND book I bought, I set up the domain movie.edu and [URL]. To my great surprise and delight, I can access toystory.movie.edu in a browser from another PC on the LAN (as long as I add 192.168.140.25 to the DNS servers). Encouraged by this victory, I decided to try to set up another subdomain at [URL].
This kind of worked but not completely. Interestingly, I can get to both [URL] and [URL] on my server, but on my PC, I can only get to [URL] not [URL]. Here is my db.movie.edu:
Code:
$TTL 3h
movie.edu. IN SOA toystory.movie.edu. al.movie.edu. (
1 ; Serial
3h ; Refresh after 3 hours
[code]....
I have setup password-less SSH on 2 machines the same way, but it only works on one.
3 machines
2 remotes :-
A : 192.168.109.15
[code]....
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedI only have one IP adress to access the server. But the server will host 3 web sites and I want them to be hosted in a vm. So, I want to setup 3 virtual machines to do it and use apache reverse proxy and vhosts to redirect the domain requested to the right vm. Now. I understand the concept, but I am not an expert to set that up....
I have an openSUSE 11.3 server. So, I have to set a virtual machine server, is that right? I have been told that I cannot do it with VMware server in oS 11.3. Can I use virtualbox for this? I only have to install virtual box? Is there a special version to install? Once the virtual machine server is install, is it trivial to create 3 vm? So, I want to know wich are the steps I have to take to set that up.
suddenly ,I get a project to shutdown all xp's by a Linux server(RHEL5) using a single command.by net command i did that.but in this case i have to specify all the ip addresses manually .Is there any way that Linux server obtain the ip addresses automatically on a network and then shut down all the pc's
View 2 Replies View RelatedI am having a server in a corporate data centre. There are some virtual machines running on it.The main server is accessible from internet via SSH. There are some people who within the lan access the virtual machines whose IPs on LAN are
Quote:
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
from internet only one host is allowed SSH. This machine has public IP and is also connected to LAN on the IP 192.168.1.50. Tunnel is not allowed on our network.So now I am came across a solution as explained on this link. I am not clear with on which machine .ssh/config file I add following
Code:
Host securehost.example.com ProxyCommand ssh user1@insidemachine.com nc %h %p Should above be done on gateway where public IP and ssh is allowed or client on internet who has to login. Do I need to create separate accounts on the gateway also so that the users who can SSH to gateway then are forwarded to inside machines? Or one account on gateway is sufficient for different people logging in via internet to my gateway and then forwarded to internal machine?
Then do I need to create an account user1 on the gateway also?
1) What is the correct syntax for ProxyCommand on gateway's .ssh/config should I use
Code:
ProxyCommand ssh user1@inside.machine nc %h %p
or I should use
Code:
ProxyCommand ssh user1@gateway.com in nc %h %p
2) Should I create new user accounts on gateway also which exist on internal machine?
I'm planing to get 4 dedicated, remote servers for my start up, the question I have is: how to do only one installation and then duplicate or clone this installation into all the other machines. I could install those 4 servers manually, but the problem is - we have a lot of things that our application needs, and later there will be more servers. So an automatic way to do that would be better. We are using Debian. Perhaps there's a way to create a "big package" that will contain all of the necessary software in it, then simply require from the hosting provider that all of our servers come with Debian installed, and then manually upload the "big package" and install it?
View 3 Replies View RelatedI cant get my linux server ( centos5 ) with virtualbox run 2 virtual machines in headless mode. Only one machine gets network connection. Can anyone tell me how to make 2 or more virtual machines work with 1 eth-port in headless mode using virtualbox ?
View 1 Replies View RelatedI used to use server 64, and it handled memory well with Jaunty and Karmic but with Lucid the memory usage is always high and can't run virtual machines.
[Code]...
I have developed a website. Now i would like to monitor the IP address of machines who are accessing the server. The simplest possible solution to this that comes first into my mind is to use jsp inbuilt tags.
Code:
<%
out.print( request.getRemoteAddr() );
out.print( request.getRemoteHost() );
%>
but it has given me some other IP address(May be a proxy server's ip address)
So i was left with one choice is to run netstat on host server . Here is what i have done.
Code:
netstat -an | grep 8080 (As tomcat runs on port 8080).
Should i modify the command or there is any other way around to monitor the IP address?
I am currently investigating channel bonding for rhel5.5.Is there any way I can create one bond from nics on two different linux machines.They will be a cluster without any clustering software like beowulf or LVS.There will be a cluster interconnect through which they can communicate.Should I tweak the bonding module??
View 3 Replies View Related