I'm using Apache 2 on a Linux server and I was wondering if it was possible to redirect certain IP ranges to another page. I know it's possible to block an IP, but is there a way to block all IP's and only allow a certain IP range to connect, such as 5.87.xxx.xxx? I own this server, so if I need to use another OS, webserver, change configuration files, etc., that's fine.
I want to give a 404 error when the index.html file is requested, i already know how to do this in php, but i cant seem to locate any information about how to do it in htaccess. I thought about just redirecting index.html to a page that dose not exist, but i would like to do it correctly from the start.
I know that I can use the Redirect directive in apache to redirect users to another domain with "Redirect permanent / http://www.newdomain.tld", but when I use that line the entire URL is preserved.
For example, if a user tries to access [url] they will be redirected to [url]. Is it possible to redirect all requests to the root of the new domain [url]?
I have httpd server installed and I need to do redirect all the requests from clients thats start with a http://abc.*.* on to [url]. I know this has to be done with Rewrite conditions but Im at a loss coming up with the right condition. this site doesnt have any virtual hosts configured. Currenlty I only can access the apache test page.
I have an Apache 2.2.3 server and I am trying to get it it to redirect from http://mydomain.com/ to [url].
I have tried the following
Redirect / [url]
and
RewriteEngine on RewriteRule / [url]
The problem is i have many other contexts.
context1 context2 context3
So if you go to [url] you get re-directed to context1. Which is not what I want. Basically I am asking how can I set the default context on the server to context1 if you do not type it?
I'm trying to make a redirect rule on my .htaccess but it's not working as planned.
Quote:
The first rule works fine, but on the second rule i do have a problem.
When I type http://domain.com/?tempskin=_rss2 the redirect does not work, but if I change the ? to any other character or even group of characters, the redirect works fine. example:
[url] will be redirected to [url]
But i do need to redirect the ?tempskin=_rss2. I already tried some variations on the redirect rule without any success.
quesiton is how I can redirect http://www.thispage.com to http://my.page.com and still retail displaying http://www.thispage.com.The issue is if I point in httpd.conf to directory where my.page.com it doesnt work because it knows it address.
I am trying to show library content (asp files, IIS server, MySQL database on Windows Server 2003 - Inetpub/wwwroot/library - 192.168.0.3) publicly. But Apache webserver is on Linux machine. In one of previos topics I was adviced to mount this remote machine webfolder into Linux /var/www. Well this way it want work. I was adviced it can be done through redirecting.
I need to redirect through a .htaccess file in my root folder. The redirect needs to be done from http://www.department.univeristy.edu/reuir to a different server [url]. I am having trouble in determining the pattern that is required for it to take effect.
I have a website example.com, serving pages on port 80. I want the url example.com/redmine to be rewritten to port 3000, where my redmine server is running, without actually changing the URL. So the user typing in example.com/redmine/test would serve up example.com:3000/test, without the user actually connecting through the port. I know this can work through CPanel, but I don't know exactly how it was implemented. I'm looked at how mod_proxy, mod_proxy_html, and mod_rewrite,
I have a png file which I put into a user's directory: /~user/file.png This displays OK. When placed in the user's images directory: /~user/images/file.png the file does not display. If I put the file in the global images directory: /images/file.png the file displays OK. Finally if I change the format of the file to a jpg and save it in the user's images directory: /~user/images/file.jpg the file displays OK.
When I look at the Apache access_log and error_log files, there is not even an entry if the png image file is accessed from the user's images directory.
I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info: monitored server: CentOS 5.3 2.6.18-128.1.1.el5
I have been beating my head for the last few weeks on this problem, (although I have been taking the wrong approach, it seems).
I need a gateway to direct web traffic to three separate servers/domains. I have been trying to do this with both a dns server and , (seperatly), apache server to forward requests. The dns server was a no go, and <i can only get apache to redirect http and ftp.
After Googling this ALOT, I believe that what I need is a gateway server to redirect my traffic to the 3 different servers. I have been reading about using using nat and iptables for this and was wondering if anyone had any advice/suggestions on this. The other thought I had was to use something like pfSense to create the gateway, but I am still reading the documentation, and I am unsure if this approach will work.
The issue is that my CentOS workstation is in a vlan from where the Intranet's DNS servers are unreachable. For browsing the web there is an ISA proxy server, which I presume resolves DNS for my firefox. However, wget, host, ping and aria2c fail to get any sort of DNS resolution since they're being run from command line.I have exported HTTP_PROXY value, which provides me internet access on console, but,only when I connect using IP address. It fails on name resolution.
My question is:May I redirect the DNS queries to my home PC which would be running a DNS server on a non standard port?I was thinking of putting nameserver 127.0.0.1 in /etc/resolv.conf and then put iptables rule to redirect 127.0.0.1:53 UDP to a.public.ip.address:3535 UDP..I don't know if I am shooting blanks or what, I am not very much aware of this kind of setup.My main need is to provide DNS resolution to console apps.I want to utilize my company's idle bandwidth for bulk downloads, so, using proxy, SSH tunneling through my Home PC is out of question.
I'm running a linux cloud server with the following config 1.2ghz Processor allocation 752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
I installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
Can anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
