Red Hat :: Install Image Magic For Green Stone - Failed Dependencies?
Nov 4, 2010
I have installed greenstone in RHEL 4 and the version for greenstone is 2.8 . when I install this from imagemagic rpm I get some dependant files to be installed there are many to be installed are these inculeded in one rpm package or do I need to install one by one the dependancy files are
Failed dependencies:
libHalf.so.4 is needed by ImageMagick-6.6.5-4.i386
libIex.so.4 is needed by ImageMagick-6.6.5-4.i386
libIlmImf.so.4 is needed by ImageMagick-6.6.5-4.i386
libImath.so.4 is needed by ImageMagick-6.6.5-4.i386
libc.so.6(GLIBC_2.4) is needed by ImageMagick-6.6.5-4.i386
libcdt.so.4 is needed by ImageMagick-6.6.5-4.i386
[Code]...
how to find the above files are from which package
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
Does anyone know how I can install the following dependencies? libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 I tried through yast with no luck.
I install x3270 but not install ll display error given, so how to install that package Warning: /home/mainframe/x3270-x11-3.2.20-4.i386.rpm: V3 DSA signature: NOKEY, key ID 73307de6 error: Failed dependencies: x3270 = 3.2.20 is needed by x3270-x11-3.2.20-4
I'm running Fedora 11: kernel Linux 2.6.30.9-96.fc11.i586 Gnome: 2.26.3
Trying to install orkaudio using the instructions here: [URL] When I get to rpm -i ACE-5.4.8-1.i386.rpm I get: error: Failed dependencies: libcrypto.so.4 is needed by ACE-5.4.8-1.i386 libssl.so.4 is needed by ACE-5.4.8-1.i386
I've also tried system/administration/add/remove software but no joy. if I do # yum install openssl I get: Loaded plugins: refresh-packagekit Setting up Install Process Package openssl-0.9.8k-5.fc11.i686 already installed and latest version Nothing to do
I have a few questions on installing of mydns on page-5 of Till's guide: (The Perfect Server - OpenSUSE 11.1 [ISPConfig 3] - Page 5 | HowtoForge - Linux Howtos and Tutorials)
I installed C ygwin (full installation) on my PC with WinXP on it. Then I downloaded "SendIP" at: [URL].
/flin@JKPZV2X /cygdrive/d/software/sendip $ rpm -ivh sendip-2.5-1.i386.rpm error: Failed dependencies: libc.so.6 is needed by sendip-2.5-1 libc.so.6(GLIBC_2.0) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.1) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.1.3) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.3) is needed by sendip-2.5-1 libdl.so.2 is needed by sendip-2.5-1 libdl.so.2(GLIBC_2.0) is needed by sendip-2.5-1 libdl.so.2(GLIBC_2.1) is needed by sendip-2.5-1 libm.so.6 is needed by sendip-2.5-1 flin@JKPZV2X /cygdrive/d/software/send/
I've created USB bootable image of my Squeeze using live-magic and had the massage "Installation Finished".Now if I try to boot my system using this USB stick, I get the message:"Insert system disk in drive.Press any key when ready..."
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
Upon boot up the usual little mouse splash boot is suppose to come up. Once I first installed it (10.10 via usb) the boot screen worked perfectly but after I updated via the update manager the boot splash became all static and green lines across the image. It still boots up to the login screen but it's just ugly looking at it.
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
I have heard that Rosetta Stone runs well under Wine so I am attempting to install Rosetta Stone V3.x on my openSuSE 11.3 computer. I am tired of switching back and forth to Windows just to use this one program. When I insert the RS Application CD and mount it, no files show up. I have let HAL mount it, I have mounted it from the command line, and have made an image with K3B and then mounted the image but no matter what I do I cannot view any files.
I have tried to view the files with Dolphin, MC, and used ls from the command line with nothing showing up. K3B made a 408.8 MB iso file so something is on there. How can I access these files so that I can install Rosetta Stone?
i successfully installed rosetta stone and now i want to install a language pack but that requires the cd drive how do i give wine access to the cd drive so i can install a language pack
I attempted to install the power management package apcupsd-3.14.8-1.el4.i386.rpm on a vortexbox (Fedora 14) appliance and got the following: error: Failed dependencies: libcrypto.so.4 is needed by apcupsd-3.14.8-1.i386 libnetsnmp.so.5 is needed by apcupsd-3.14.8-1.i386 net-snmp is needed by apcupsd-3.14.8-1.i386 How can I obtain and install these items?
I'm tying to install inspircd12 on vps. This is what i get.
Code: syhsyhsyh:~ # rpm -Uhv inspircd12-1.2.8-2.1.i586.rpm warning: inspircd12-1.2.8-2.1.i586.rpm: Header V3 DSA signature: NOKEY, key ID aa829aef error: Failed dependencies: libgnutls.so.26 is needed by inspircd12-1.2.8-2.1.i586 libgnutls.so.26(GNUTLS_1_4) is needed by inspircd12-1.2.8-2.1.i586 libmysqlclient_r.so.15 is needed by inspircd12-1.2.8-2.1.i586 libmysqlclient_r.so.15(libmysqlclient_15) is needed by inspircd12-1.2.8-2.1.i586 libpq.so.5 is needed by inspircd12-1.2.8-2.1.i586
I have tried to install libgnutls.so.26 manual but it is still not working.
I find that (failed) dependencies are such a pain in the s.
I was just wondering, instead of using yum or online to find dependencies 1 by 1. Is there any faster method to go about installing dependencies? or any advice that makes linux installation a swift?
Trying to install net-snmp on a VM running rhel5. I did a 'rpm -qa |grep snmp' and it returned 'net-snmp-libs-5.3.2.2-9.el5' as already being installed.
So, I then ran 'rpm -ivh net-snmp-5.3.2.2-9.el5.1.x86_64rpm' and it returned an error: Failed dependencies: net-snmp-libs-5.3.2.2-9.el5 is needed.
Why isn't it recognizing that net-snmp-libs is already installed on the server?
I am attempting to write an rpm for railo-resin server. To the best of my knowledge the rpm is written correctly, however when I run "rpm -ivh rail-x.x.x.rpm" I get the following error. Quote:error: Failed dependencies: libodbc.so is needed by railo-3.1-2.i386 libodbcinst.so is needed by railo-3.1-2.i386
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies: libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
I'm new to Linux and am trying to install libcurl to use in my c++ code on my fedora 14 system. I went to the libcurl site and downloaded the binary package for Redhat Linux 7.2 on i386. There was no download for Fedora.It was an .rpm package and so I used rpm -i libcurl4-7.21.7-1.i386.rpm to install it.
I received the following errors: error: Failed dependencies: libcom_err.so.3 is needed by libcurl4-7.21.7-1.i386 libcrypto.so.2 is needed by libcurl4-7.21.7-1.i386 libgdbm.so.2 is needed by libcurl4-7.21.7-1.i386 liblber.so.2 is needed by libcurl4-7.21.7-1.i386 libldap.so.2 is needed by libcurl4-7.21.7-1.i386 libsasl.so.7 is needed by libcurl4-7.21.7-1.i386 libssl.so.2 is needed by libcurl4-7.21.7-1.i38
Do I need to simply download these files? Or is it a problem of downloading the wrong binary package? If I do need to download them then from where?
---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------
Never mind, I just did a yum install libcurl and it worked out...... yum is pretty amazing.
libapr-0.so.0 is needed by httpd-2.0.59-1.i386 libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386 libcrypto.so.4 is needed by httpd-2.0.59-1.i386 liblber-2.2.so.7 is needed by httpd-2.0.59-1.i386 libldap-2.2.so.7 is needed by httpd-2.0.59-1.i386 libssl.so.4 is needed by httpd-2.0.59-1.i386
[root@ganesh apache]# warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 -bash: warning:: command not found
I have installed Redhat 5.5 and when I try to install Openoffice v 3.3, I get dependencies error. I successfully run "tar -xzvf" command. But when I run next command I get this error.
# rpm -Uivh *.rpm error: Failed dependencies: libfreetype.so.6()(64bit) is needed by ooobasis3.3-core04-3.3.0-9567.x86_64 libgnomevfs-2.so.0()(64bit) is needed by ooobasis3.3-gnome-integration-3.3.0-9567.x86_64 libgconf-2.so.4()(64bit) is needed by ooobasis3.3-gnome-integration-3.3.0-9567.x86_64 #
I do encounter when I try to install this file: [root@mypc]# rpm -ivh sysstat-7.0.2-3.el5.i386.rpm warning: sysstat-7.0.2-3.el5.i386.rpm: V3 DSA signature: NOKEY, key ID 37017186 error: Failed dependencies: libc.so.6(GLIBC_2.4) is needed by sysstat-7.0.2-3.el5.i386 rtld(GNU_HASH) is needed by sysstat-7.0.2-3.el5.i386
Also when I try this also not work # yum install sysstat -bash: yum: command not found However the os and email server working fine on it. What should I check and try it.
I am trying to install a program called PQLII (seismology related). I'm running Red Hat Linux Fedora 9. When I installed the OS, I selected "Everything". When I run: rpm -ivh PQL-2009-246.i386.rpm It returns: error: Failed dependencies: libXFixes.so.3 is needed by PQL-2009-246 libXinerama.so.1 is needed by PQL-2009-246 rtld(GNU_HASH) is needed by PQL-2009-246
OK, so I google the 3 files listed and download them which I found on [URL]. None of the filenames listed matched precisely those listed, but I downloaded files that were as near a match as possible, i.e: libXfixes-4.0.3-3.fc9.i386.rpm libXinerama-1.0.3-1.fc9.i386.rpm glibc-2.8-3.i386.rpm
Being the logical type, I first try to install libXfixes-4.0.3-3.fc9.i386.rpm since it's listed first, but it generates: error: Failed dependencies: rtld(GNU_HASH) is needed by libXfixes-4.0.3-3.fc9 Ok, so then I run: rpm -ivh glibc-2.8-3.i386.rpm which generates: error: Failed dependencies: glibc-common = 2.8-3 is needed by glibc-2.8-3
I persevere, search for and download glibc-common-2.8-3.i386.rpm. rpm -ivh glibc-common-2.8-3.i386.rpm generates: error: Failed dependencies: glibc = 2.8-3 is needed by glibc-common-2.8-3 tzdata >= 2003a is needed by glibc-common-2.8-3 Am I downloading the wrong files?
i am having a issue installing php-oci8. I am using a cesntos 5.5 OS
when i try installing php-oci8 i get this error [root@web8 tmp]# rpm -ivh php-oci8-5.2.14-1.el5.remi.x86_64.rpm warning: php-oci8-5.2.14-1.el5.remi.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 00f97f56 error: Failed dependencies: php-common = 5.2.14-1.el5.remi is needed by php-oci8-5.2.14-1.el5.remi.x86_64
so then i checked whether i have php-common 5.2.14 installed it yielded this result
