OpenSUSE :: Installing Inspircd12 On VPS But Get Failed Dependencies
Jan 1, 2011
I'm tying to install inspircd12 on vps. This is what i get.
Code:
syhsyhsyh:~ # rpm -Uhv inspircd12-1.2.8-2.1.i586.rpm
warning: inspircd12-1.2.8-2.1.i586.rpm: Header V3 DSA signature: NOKEY, key ID aa829aef
error: Failed dependencies:
libgnutls.so.26 is needed by inspircd12-1.2.8-2.1.i586
libgnutls.so.26(GNUTLS_1_4) is needed by inspircd12-1.2.8-2.1.i586
libmysqlclient_r.so.15 is needed by inspircd12-1.2.8-2.1.i586
libmysqlclient_r.so.15(libmysqlclient_15) is needed by inspircd12-1.2.8-2.1.i586
libpq.so.5 is needed by inspircd12-1.2.8-2.1.i586
I have tried to install libgnutls.so.26 manual but it is still not working.
I attempted to install the power management package apcupsd-3.14.8-1.el4.i386.rpm on a vortexbox (Fedora 14) appliance and got the following: error: Failed dependencies: libcrypto.so.4 is needed by apcupsd-3.14.8-1.i386 libnetsnmp.so.5 is needed by apcupsd-3.14.8-1.i386 net-snmp is needed by apcupsd-3.14.8-1.i386 How can I obtain and install these items?
I find that (failed) dependencies are such a pain in the s.
I was just wondering, instead of using yum or online to find dependencies 1 by 1. Is there any faster method to go about installing dependencies? or any advice that makes linux installation a swift?
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies: libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
I'm new to Linux and am trying to install libcurl to use in my c++ code on my fedora 14 system. I went to the libcurl site and downloaded the binary package for Redhat Linux 7.2 on i386. There was no download for Fedora.It was an .rpm package and so I used rpm -i libcurl4-7.21.7-1.i386.rpm to install it.
I received the following errors: error: Failed dependencies: libcom_err.so.3 is needed by libcurl4-7.21.7-1.i386 libcrypto.so.2 is needed by libcurl4-7.21.7-1.i386 libgdbm.so.2 is needed by libcurl4-7.21.7-1.i386 liblber.so.2 is needed by libcurl4-7.21.7-1.i386 libldap.so.2 is needed by libcurl4-7.21.7-1.i386 libsasl.so.7 is needed by libcurl4-7.21.7-1.i386 libssl.so.2 is needed by libcurl4-7.21.7-1.i38
Do I need to simply download these files? Or is it a problem of downloading the wrong binary package? If I do need to download them then from where?
---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------
Never mind, I just did a yum install libcurl and it worked out...... yum is pretty amazing.
I have installed Redhat 5.5 and when I try to install Openoffice v 3.3, I get dependencies error. I successfully run "tar -xzvf" command. But when I run next command I get this error.
# rpm -Uivh *.rpm error: Failed dependencies: libfreetype.so.6()(64bit) is needed by ooobasis3.3-core04-3.3.0-9567.x86_64 libgnomevfs-2.so.0()(64bit) is needed by ooobasis3.3-gnome-integration-3.3.0-9567.x86_64 libgconf-2.so.4()(64bit) is needed by ooobasis3.3-gnome-integration-3.3.0-9567.x86_64 #
I am trying to install a program called PQLII (seismology related). I'm running Red Hat Linux Fedora 9. When I installed the OS, I selected "Everything". When I run: rpm -ivh PQL-2009-246.i386.rpm It returns: error: Failed dependencies: libXFixes.so.3 is needed by PQL-2009-246 libXinerama.so.1 is needed by PQL-2009-246 rtld(GNU_HASH) is needed by PQL-2009-246
OK, so I google the 3 files listed and download them which I found on [URL]. None of the filenames listed matched precisely those listed, but I downloaded files that were as near a match as possible, i.e: libXfixes-4.0.3-3.fc9.i386.rpm libXinerama-1.0.3-1.fc9.i386.rpm glibc-2.8-3.i386.rpm
Being the logical type, I first try to install libXfixes-4.0.3-3.fc9.i386.rpm since it's listed first, but it generates: error: Failed dependencies: rtld(GNU_HASH) is needed by libXfixes-4.0.3-3.fc9 Ok, so then I run: rpm -ivh glibc-2.8-3.i386.rpm which generates: error: Failed dependencies: glibc-common = 2.8-3 is needed by glibc-2.8-3
I persevere, search for and download glibc-common-2.8-3.i386.rpm. rpm -ivh glibc-common-2.8-3.i386.rpm generates: error: Failed dependencies: glibc = 2.8-3 is needed by glibc-common-2.8-3 tzdata >= 2003a is needed by glibc-common-2.8-3 Am I downloading the wrong files?
My goal here is to install the truetype fonts so I can use them in openoffice. I'm using Fedora 13 w/ Gnome. Just installed it yesterday, I followed the instructions found here: [URL] but I get this error: "error: Failed dependencies: /usr/sbin/chkfontpath is needed by msttcorefonts-2.0-1.noarch" I found chkfontpath at rpm.pbone.net and put it in my rpms folder but now I get "xfs is needed by chkfontpath-1.10.1-2.fc13.i686"
I'm trying to install squirrel mail in Fedora 10 server: I'm following this tutorial: [URL]. I'm at sudo rpm -ivh courier-imap-4.4.1.20080920-1.10.i386.rpm When I run the command I get: error: Failed dependencies: /usr/local/bin/perl is needed by courier-imap-4.4.1.20080920-1.10.i386
I found this page [URL] which actually describes the error and gives a "solution" however it doesn't seem to solve my problem error: Failed dependencies: /usr/local/bin/perl is needed by courier-imap-4.1.1-1.4.i386 Solution: export PATH=/bin:/usr/bin
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
Does anyone know how I can install the following dependencies? libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586 I tried through yast with no luck.
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
I have a few questions on installing of mydns on page-5 of Till's guide: (The Perfect Server - OpenSUSE 11.1 [ISPConfig 3] - Page 5 | HowtoForge - Linux Howtos and Tutorials)
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE] Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found [Code]...
I install x3270 but not install ll display error given, so how to install that package Warning: /home/mainframe/x3270-x11-3.2.20-4.i386.rpm: V3 DSA signature: NOKEY, key ID 73307de6 error: Failed dependencies: x3270 = 3.2.20 is needed by x3270-x11-3.2.20-4
Trying to install net-snmp on a VM running rhel5. I did a 'rpm -qa |grep snmp' and it returned 'net-snmp-libs-5.3.2.2-9.el5' as already being installed.
So, I then ran 'rpm -ivh net-snmp-5.3.2.2-9.el5.1.x86_64rpm' and it returned an error: Failed dependencies: net-snmp-libs-5.3.2.2-9.el5 is needed.
Why isn't it recognizing that net-snmp-libs is already installed on the server?
I am attempting to write an rpm for railo-resin server. To the best of my knowledge the rpm is written correctly, however when I run "rpm -ivh rail-x.x.x.rpm" I get the following error. Quote:error: Failed dependencies: libodbc.so is needed by railo-3.1-2.i386 libodbcinst.so is needed by railo-3.1-2.i386
I'm running Fedora 11: kernel Linux 2.6.30.9-96.fc11.i586 Gnome: 2.26.3
Trying to install orkaudio using the instructions here: [URL] When I get to rpm -i ACE-5.4.8-1.i386.rpm I get: error: Failed dependencies: libcrypto.so.4 is needed by ACE-5.4.8-1.i386 libssl.so.4 is needed by ACE-5.4.8-1.i386
I've also tried system/administration/add/remove software but no joy. if I do # yum install openssl I get: Loaded plugins: refresh-packagekit Setting up Install Process Package openssl-0.9.8k-5.fc11.i686 already installed and latest version Nothing to do
libapr-0.so.0 is needed by httpd-2.0.59-1.i386 libaprutil-0.so.0 is needed by httpd-2.0.59-1.i386 libcrypto.so.4 is needed by httpd-2.0.59-1.i386 liblber-2.2.so.7 is needed by httpd-2.0.59-1.i386 libldap-2.2.so.7 is needed by httpd-2.0.59-1.i386 libssl.so.4 is needed by httpd-2.0.59-1.i386
[root@ganesh apache]# warning: httpd-2.0.59-1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 751d7f27 -bash: warning:: command not found
I do encounter when I try to install this file: [root@mypc]# rpm -ivh sysstat-7.0.2-3.el5.i386.rpm warning: sysstat-7.0.2-3.el5.i386.rpm: V3 DSA signature: NOKEY, key ID 37017186 error: Failed dependencies: libc.so.6(GLIBC_2.4) is needed by sysstat-7.0.2-3.el5.i386 rtld(GNU_HASH) is needed by sysstat-7.0.2-3.el5.i386
Also when I try this also not work # yum install sysstat -bash: yum: command not found However the os and email server working fine on it. What should I check and try it.
i am having a issue installing php-oci8. I am using a cesntos 5.5 OS
when i try installing php-oci8 i get this error [root@web8 tmp]# rpm -ivh php-oci8-5.2.14-1.el5.remi.x86_64.rpm warning: php-oci8-5.2.14-1.el5.remi.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 00f97f56 error: Failed dependencies: php-common = 5.2.14-1.el5.remi is needed by php-oci8-5.2.14-1.el5.remi.x86_64
so then i checked whether i have php-common 5.2.14 installed it yielded this result
Successfully installed MRICRO a dicom image viewer.However failed installing pacsone PACS server. Other apps like aeskulap, etc which are available in tar.gz format do need help in installing.
I am needing to install the geda pcb layout package on my system. The one that is in the repository is a much older version, 20091103, and some projects I need to modify were developed using a newer version, 20100929, and the older one on Ubuntu will not open them. I downloaded the pcb source and ran configure and a couple of dependencies failed that I was able to correct with synaptic. But, then it complained about not having gdlib-config. Which I cannot find that in the repositories. What do I need to get?
I installed C ygwin (full installation) on my PC with WinXP on it. Then I downloaded "SendIP" at: [URL].
/flin@JKPZV2X /cygdrive/d/software/sendip $ rpm -ivh sendip-2.5-1.i386.rpm error: Failed dependencies: libc.so.6 is needed by sendip-2.5-1 libc.so.6(GLIBC_2.0) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.1) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.1.3) is needed by sendip-2.5-1 libc.so.6(GLIBC_2.3) is needed by sendip-2.5-1 libdl.so.2 is needed by sendip-2.5-1 libdl.so.2(GLIBC_2.0) is needed by sendip-2.5-1 libdl.so.2(GLIBC_2.1) is needed by sendip-2.5-1 libm.so.6 is needed by sendip-2.5-1 flin@JKPZV2X /cygdrive/d/software/send/
While loading a rpm package its showing error of failed dependencies so wat to do for dat pls guide me n in another case its showing cant create transaction lock on /var/lib/rpm/_db.000