I think the gx620 is called "64-bit capable" or something like that. I get the idea it's not a true 64-bit machine. I am thinking about getting CentOS 6.x (when it comes out) to learn rhel 6.x. Some features, like KVM, only work on 64-bit. I am seeing gx620s on craigslist for about $100.
View 5 RepliesI have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies View RelatedI find myself in unfamiliar territory. I am attempting to get a Dell M610 (in an M100e) running Ubuntu 9.1 64bit to talk to a Dell EMC Fibre Channel Array. The Dell has an Emulex card in it and it appears that the driver is loaded OK. What I am not sure on is what to do next! I have the SAN end configured but how do I get my LUN mounted on Ubuntu ?
View 1 Replies View RelatedI have a rack of Dell 1750s running RHEL 5.3 and we just upgraded the memory from 4GB to 8GB. When the machine boots, the BIOS probes out 8GB, but the boot scroll (dmesg) only shows 4GB, as seen after we login. How can I get it to see all of the mem?
View 9 Replies View RelatedI have a Dell Precison 690 system in my lab. I want to downgrade the system from RHEL 5 to RHEL $ since some of my software is not working in RHEL 5. I have the installation CD and the dell driver CD. There are 2 cd drives in the system and I am using both the CDS at the same time. But when the installation asks to select hda or hdb to get the driver cd. I put the CD in the second cd dirve which is connected to hdb. When I select hdb it is not recognizing the cd. When I skip the driver selection step I am getting the error:"No valid device were found on which to create new file"I have used the following and nothing worked:
linux noprobe
linux apci blah blah off
linux all generic blah blah blah
I am new to linux.
I am trying to get vnc setup on my workstation.
I will paste some of the steps I have taken.
I downloaded the tigervnc and tigervnc-server through yum.
I setup the service file as so
Then when I go to start my server i get a FAILED message:
I have a Dell 1435 with an AMD Opteron 64 bit chip, however when I install RHEL 5.5 I only get a 32 bit OS. The disk I'm using to install RH is the 64 bit copy, it says "For 64-bit AMD64 and INTEL 64" on the front of the disk. After the install I do a "uname -m" and it displays "i686" which indicates a 32 bit OS.1. Why does this happen?2. Is there a CL option that will allow me to force an install of the 64 bit os?I'm confused.I've installed literally over 100 systems and this never happened.
View 3 Replies View RelatedJust looking for some general guidance with regard to installing over the native Windows 7 (x64) installation on my new Alienware M11x with RHEL 5. I have considered other Linux OS's such as Ubuntu Desktop, Fedora, and Open SuSe. However, I am of the opinion that RHEL will - from the jump - most fluidly integrate with the Intel Core i7 architecture, 1GB NVIDIA GeForce GT 335M, and other components. I plan to convert my existing Windows XP installation into a VMWare image and run that as a guest on my Alienware M11x (instead of alternatively running RHEL 5 as a guest). However, I am concerned whether it will be possible for the guest (Windows) OS (or any guest OS for that matter) to recognize/use the Alienware sound/video/LAN/Bluetooth EDR/WWAN/etc. (as the drivers were designed for Windows 7).
View 3 Replies View Relatedi want to disable all DHCP request, can i turn off the client that if a MAC address changes a dhcp request is not automatically made?reason for this: I have HP blade running with an Intel NC260M mezzanine card running with virtual connect. I have experienced problems with firmware levels with this card where the virtual connect mac address is ignored and the real MAC displayed. As we are using bonds on the servers and have 6 NICs installed we have to tie down the MAC address to a bond. A blade was replaced today without the firmware update and the real MAC appeared, a dhcp request was made and my-eth[2-3] and resolv.conf files were over-written by the dhcp supplied
View 3 Replies View RelatedI received an amber light warning "IB110 - SBE Log Disabled." I've learned from Red Hat documentation that this is "for information only". Where can I find a better explanation of this warning? Also, what is the SBE Log, how can I enable it, and where can I view it? It doesn't seem to be in /var
View 1 Replies View Relatedwe are using a DELL server installed with RHEL release 3(update 2) for running SS7 stack. we are using it for telecommunication testing. from last two months it is getting out of network though the server is up. we are not able to connect it through ssh using putty from local desktop. I tried searching for the reason in logs under /var/log/messages but i could not fine it. please tell me the path under which i can find the system error messages. We are out of support from DELL........
View 2 Replies View RelatedI am using DELL Studio 15, Windows Vista Home Premium. I have a dual boot of Linux (RHEL 5). My question is how to configure Internet access in my PC in LINUX OS. Windows mode :
how do i access Internet :
I insert a LAN cable to my laptop and access internet. or I insert the cable to my wifi router and access it wireless whenever I am bit far away. RHEL 5.0 Linux 1) UNABLE to access internet when I connect the lan cable to my laptop. 2) Is there any way i can access internet or should i use any drivers that are provided my dell pc. I am very new to linux and i am not sure to which and how to use it.
I have running 32bit Tomcat on 64bit Redhat machine. What is the maximum Xms Heapsize for 32bit applikation working in 64bit environment. Code: -Xms2048M -Xmx3300M Today I saw that my Tomcat swapping. Seems to bee problem with memory.
View 1 Replies View Relatedinstalling swi-prolog on RHEL 5.4 64bit. during the make it returns the error
[code]...
From what I understand -fPIC is something that is only a concern on 64bit operating systems. I tried this on RHEL 5.4 32bit and it worked fine. How do I get past this error? I've tried disabling SElinux as recommended on the swi-prolog website, but that had no effect. I also tried compiling with "CFLAGS=-fPIC" but still the same issue. This happens on all my RHEL 5.4 64bit machines.
Has anyone tried upgrading the BIOS on Dell laptops? This is the Dell Windows based update for my Studio 1558 laptop. [URL] Would this work using Wine? Is there a Fedora way to apply this update?
View 3 Replies View RelatedI am looking at getting a Dell Poweredge 850 Pent4 3.6GHz 64bit with two 160Gig SATA drives and I was wondering if anyone has installed Centos on one of these servers or has anyone had any issues installing Centos on these servers.
View 1 Replies View RelatedI have had no problem installing Fedora OS on any of my Dell servers prior to this post. Anyway, I wouldn't call this a problem but recently, we bought another DELL server with Quad Core, 4GB, etc... AND this model has 2 swappable SAS Harddrives.
I wouldn't call myself an expert but then again I am not a newbie too. However, I have never setup any RAID before and now I am forced to setup RAID1 on this server. So, in a way, I am a newbie in setting up RAID
Would someone please point me in the right direction as I have no idea what I am supposed to do to setup the RAID. FYI, I will be installing Fedora 10 64bit on this server. I would appreciate if you can start from the very beginning, ie. partitioning, formatting the harddrives during OS installation, etc..
Trying to install 64bit onto Dell T3500 with NVidia Quadro NVS 295. Live Cd works and Install completes. When I boot I get BIOS and Disk info then boot switches to flashing cursor after disk read and then Monitor goes into sleep mode.
View 6 Replies View RelatedI was curious as to if there was a way to install a 32bit driver on a 64bit system. I have a dell v515w printer and the only driver they provide for it is a 32bit driver. I was wandering if anyone may know of a way to install it or if anyone knows of any other available drivers. I have searched everywhere for i dont know how long and came up with nothing i have tried installing the 32bit libraries and it didnt help.. and going back a 32bit system is out of the question due to ubuntu not wanting to load.. i think it has something to due with my hard drive being to large... but im using ubuntu 10.10 maverick 64bit...
View 2 Replies View RelatedI am trying to install libg++2.7.0 package in FedoraCore 6 on a DELL machine that has Intel Pentium D processor.I get an error saying "unrecognized host system name i686 unknown linuxoldld"
View 1 Replies View RelatedI am having a problem recognizing the full 24GB memory on a dell PowerEdge R610 system I just purchased. This is the Fedora 11 preview version, uname -a returns this:Linux comp1 2.6.29.3-140.fc11.x86_64 #1 SMP Tue May 12 10:44:27 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
this is the off the shelf box from Dell and it is a quad-core with 24GB memory, but the OS can only recognize about 3GB, here is the free -m
total used free shared buffers cached
Mem: 2980 607 2373 0 24 176
the system is otherwise functioning normal. how to get the full 24GB of mem recognized?
I'm trying to install OpenSuse 11.2 64bit on a new Dell Latitude E6410 notebook. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer DVD, but once I choose either Live version, to test it out, or just go for Install, after the first selection screen where I can change the default video at the bottom, I just get a black screen, no video.
I can't find any info on installing Suse on this notebook, (I think its only be available for a couple of weeks now). What do I do to get the screen to show me the graphical installer, Or how do I make the KDE Live version run from the 64bit DVD. I also tried the 32bit version DVD, but it wouldn't give graphics either, so it seems like an X issue.
My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View Relatedis possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies View RelatedWe are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies View Relatedcan not ping from host (RHEL 6) to RHEL 5 in (virtual)? I have stopped iptables on both machines. But still not able to ping from host machine to virtual.
View 1 Replies View RelatedI have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
View 1 Replies View RelatedA client has sent me an RHEL 5.1 box for me to do some work on, but it's not registered with Red Hat. This is causing me problems, because it's a minimal installation, and I need some more dev software.My immediate reaction was to install various bits (emacs, and so on) from my Centos 5(.0) DVD.The base RHEL system only had one (disabled) repo entry,so I added a yum DVD repo entry in yum.conf.d.
This looked good to start with, but it doesn't work. Something in RHEL's pirut/yum/rpm/whatever is getting confused, and can't work out what is/isn't installed.
Question - how do you maintain an unregistered RHEL box? Has RH done something to make life difficult? Is my problem simply that I'm using a Centos 5.0 DVD, instead of Centos 5.1? Am I stuck with downloading lots of rpms from the net and doing everything manually? I really don't want to do that.
I am trying to download RHEL 5.4 AS version for testing..But under [URL] There is no specific link for AS version or ES version..How can I detect which iso is for AS and which one for ES..? There are separate links for AS and ES version for RHEL 4.x version but why is it not available for RHEL 5.x versions?
View 3 Replies View Relatedwhat are the major differences between rhel 5.2 and rhel 5.4
View 2 Replies View Related