#1 Ubuntu-10.04-x86_64 (its a form of liunx)
#2 OS 64 bit
#3 java 1.6.0_20
#4 java 64 bit
[Code]....
i need it to look like this below, and load the program called "craft".jar
@ECHO OFF
IF /I "%PROCESSOR_ARCHITECTURE:~-2%"=="64" "%ProgramFiles(x86)%Javajre6injava.exe" -Xms512M -Xmx512M -jar "%~dp0craft.jar"
IF /I "%PROCESSOR_ARCHITECTURE:~-2%"=="86" java -Xms512M -Xmx1000M -jar "%~dp0craft.jar"
I've just installed java (jre-6u21-linux-i586.bin) on Red Hat 4.4 AS and issued this command to check the java version: java -versionand got :bash :java: command not found
View 4 Replies View RelatedIf i compile my.tex file using the command:latex my.tex I am getting this error:! LaTeX Error: File `pause.sty' not found.Type X to quit or <RETURN> to proceed,or enter new name. (Default extension: sty)
View 1 Replies View RelatedJava is installed in linux machine and when I enter the command java -version it shows java is not found.At the same time when i run from the folder where its installed with ./java -version it works.
first of all why its not working from any other place? also why do I need to give ./ from the folder?
when i login to one of our development server i get the following.
Last login: Tue Nov 23 14:08:32 2010 from 192.168.2.5
-bash: r: command not found
-bash: $: command not found
[code]....
I want to run java -jar command and I have the following :command not foundWhat I need to do?
View 13 Replies View RelatedI am using rhel5 with ip 192.168.0.254.i am using rhel on vmware 7. when i run links 192.168.0.254 then i got error "bash : links : command not found" i want to know why this error is showing? when i use red hat without vmware then there is no problem.
View 2 Replies View RelatedI have installed Jre in my CentOS by following instruction here InstallationBut the problem is each directory or file contains the "*" (asterisk) at the end offile name or directory even though i have fired following command chmod a+x or chmod +xso please tell me how can i execute the executable file because when i am trying to run "java" its showing me following error
View 1 Replies View RelatedOk i went to do
Code:
java -version
but it didnt work i installed it and everything i go to
Code:
cd /usr/java
but it doesnt exist
i am running Debian 6 x64
install java i am trying to run a mc server
I am running SUSE 10.2 under z/VM 540 and have java working fine. I also have IBM EKM software running fine(if I execuute the script manually).I am trying to start this software automatically following the boot process. I have tried creating a member /etc/init.d/after.local but it does not seem to know where java is./etc/init.d/after.local: line 2: java: command not found"" After I login to any user I can get java -version to work, so my classpath is good.
LINUXEKM:/ # java -version
java version "1.5.0"
Java(TM) 2 Runtime Environment, Standard Edition (build pxz64dev-20091106a (SR11 ))
[code]....
I have Debian Testing, Kernel 2.6.32-trunk-686 and Java version:
java version "1.6.0_16"
Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
If I open web page with Java application (in Opera, Iceweasel and Google Chrome), for example this page: [URL] I get error message (image in attachment). If I click in the Details, I get this text:
Java Plug-in 1.6.0_16
Using JRE version 1.6.0_16-b01 Java HotSpot(TM) Server VM
User home directory = /home/johnnycage
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class AppletGui not found.
java.lang.ClassNotFoundException: AppletGui .....
Exception: java.lang.ClassNotFoundException: AppletGui
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I am a linux newbie, and recently started shell programming. whenever I use 'let' command it gives me an error 'command not found'. I am using ubuntu 9.10 with bash.
View 5 Replies View Relatedwhat i need to do is to be able to place a command to slow down the sequence of commands in an Ubuntu script.
normally, the system will attempt to execute them all as fast as it can, but i need to be able to specify short pauses between commands
anyone know of a useful command to do this?
btw, the "sleep" command i saw somewhere hasn't quite worked in my scripts for some reason.
I have a task that I need to let run while I'm away from the computer. It's very CPU intensive and I've even had to throttle down my processor to 3GHz to keep it from overheating. I'm using a combination of GNOME Sensors App and CPU Frequency Scaling Monitor to control the overheating problem. I have the sensors app set to alarm and "killall" at 61 Degrees Celsius. The sensors app has an option where you can enter a command that it will run for you. All I need is to know what command to run that can pause this task. So later I can resume it.
I know it can be done. System Monitor has an option to "stop" a task. It also has "continue". This is how I've been doing it while I'm at the computer. So if anyone knows what the commands are that System Monitor uses, that would be a huge help. By the way, I'm using Ubuntu 9.10 with all current updates.
NOTE: For anyone who is about to flame me for having a computer that overheats and wants to tell me that this is the problem I should be after. It only overheats during this process. Not for any games or compiling or rendering or encoding. Nothing else. I have even bought a new heatsink and fan. I have redone the thermal compound on the Processor. My processor usually runs at idle around 36-39 Celcius and under normal load around 47-53 Celsius.
Im looking for the command to pause or sleep a process by pid.I dont want to use the kill -STOP
View 1 Replies View RelatedI need to run a script that I build to build a word list. Essentially what it does is run through a base list and expands that into billions of words. This way I can keep a small dictionary file and a script to expand it into a larger file (about 500 gigs). This script should take anywhere from 12-14 days to run and on my last day the power went out at my house. Is there anyway I can run this again with a fail over system? I know a battery back up is an ideal addition to my home server but if the power is out for an hour it wouldn't have made a difference. Also if I had the ability to pause the script do a reboot and resume it again that would be amazing.
View 5 Replies View RelatedI am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
I recently installed Fedora 14 from KDE live CD . everything is working excellent except when I tried to do lsmod today, I got lsmod:command not found error.I checked and found that PATH did have /sbin and /sbin/lsmod does exist. But /sbin/lsmod points to /bin/lsmod (which does not exist)I did whatprovides on lsmod and found module-init-tools-3.11.1-2.fc13.i686 as the package.
View 1 Replies View Relatedi'm using ubuntu 8.4 when i want install file.tgz, i found an error like
"installpkg command not found"
even though i have typed the command like this
"#installpkg file.tgz"
so, what's the problem with this?
I am scheduling a command for a specific time every day.
Linux crontab format which I am using :- MIN HOUR DOM MON DOW CMD
30 08 10 06 * /home/mach/script.sh
Some presetting is required?
i am trying to use ttcp for a benchmarking excercise, i have download the ttcp onto linux machine and compiled it using the c compiler but when i try running the test i get error saying [command not found].those anyone know what seems to be the problem and how i might be able to sort that out.
View 3 Replies View RelatedI have the following script:
Code:
#!/bin/bash
for HOSTS in server01 server02 server03
do
echo "Connecting to $HOSTS"
echo "Resetting Password"
echo ""
[Code]...
done When I run the script I get an error message on the hosts that says: pass=test command not found. Any ideas why is not taking it as a variable?
I have an "error", its not really and error, every time I open the terminal, it shows this:
Reading: command not found
Building: command not found
Reading: command not found
*****@****-****:~$
i have a site where I need to run a couple of php scripts every day..therefore I was thinking to setup a cronjob to do this. Unfortunately I get a whole bunch of errors trying to do so.
I can execute the php scripts via a command line without problem, one example would be
php /home/site/domains/stie.be/public_html/admin/cronjobs/cronjob_daily_ssh.php
however when i enter this command as such in a cronjob I get an error saying php command not found ( or something similar , doing this out of memory)
I tried to add the full path to the php command, but also this doenst work
the best workaround I found was to execute the php scripts with a lynx - dump command, but obviously this is not the right way.
I am completely new to linux and am trying to run a Fortran program for class. I typed in "make C=R" and it ran through a long list of things and then came up with that error.
View 1 Replies View RelatedI am attempting to create a script for Grid job submissions. I have most of it completed but when testing I've run into some problems.
How it works is that I have 2 wrapper files, one is the top of the script, the other the bottom, the original script imports commands for the middle.
Basically this is what is to happen:
cat script-start.sh >> workerscript.sh
echo commands >> workerscript.sh
cat script-end.sh >> workerscript.sh
workerscript.sh gets created with no problems but when it is run I get:
export: command not found
I think that the new script is not calling bash which gives the problem. I don't know how to fix the problem though because I have the shell set in the script-start.sh.
#!/bin/sh - tried /bin/bash, same result
export PROJECT=/......
export PROJSOURCE=/......
Using zstyle, I can create a custom warning for messages and such, but looking into the man pages and all, I do not see anything for customizing actual error messages in ZSH, as such:
Code:
casper@ltp01[/home/casper][19:14] - asdfsdafasdfjsdf
zsh: command not found: asdfsdafasdfjsdf
Quote:
Explain the error?
I have a guy in my office who was using an old version of ubuntu and he tried upgrading to 10 but now he's getting grub error 17. I Google this and everyone suggests reinstalling grub starting with opening a shell and typing 'sudo grub'.
However, I get 'command not found' in response to that. I've tried looking for the location of grub so I could try 'sudo /sbin/grub' and such, but I don't see it anywhere.
Also, I'm using a version 9.10 Live CD at the moment because I can't find out how to disable the drmraid option on the version 10 CD (necessary to detect the hard drives which, although they are on a raid controller are not configured as an array but separate drives).