Red Hat / Fedora :: Can't Add 6th Hard Drive (fc8)?
Apr 9, 2010
I'm running fedora 8 on a mobo with 1 ide controller and 6 sata ports. I use this computer as a samba file server essentially with only a power cable and network cable on the back of it (i.e. pure text terminal install ). I have 2 ide drives and 3 sata drives. No raid configuration, JBOD. This setup is working with devices /dev/sda -> /dev/sde.
When I add an additional sata drive instead of the system booting up and me having a /dev/sdf available to partition and mount. I get a [FAILED] I believe at the "Checking filesystems" point. Basically it seems that which ever port I plug the sata drive into, it conflicts with the port beside it. Thus if in the first port available it will say "No such file or directory while trying to open /dev/sdc1". If I move it to the next one it says the same thing but with value /dev/sdd1.
The bios will show the new hard drive. Hopefully this is enough information. I figure it could be any number of things but probably obvious for you linux gurus.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
Fedora 11 dies nit recognize 2bd hard drive. Windows and fedora 9 both use it. When attempting to use anaconda it does not recognize the first hard drive. Drive recently installed.
I am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
I've been trying to get Fedora 11 (x86_64, netinst) installed on my machine, but am having trouble with the hard drive selection and partitioning. This machine has 2 x 320GB hard drives. One for Windows, and one for Linux of course.
When I first tried the install, both hard drives were attached to the computer. I was expecting to see the drives seperately so that I could partition and install on only one of the drives, but device mapper kicked in and showed me a single 640GB long partition. Not very helpful in my case.
I decided to simply unplug the Windows drive so that fedora didn't see the two identical drives and so would not try to map them. However, with only the linux drive plugged in, the installer doesn't see it. There are no hard drives to select from in the installer.
As a test, I plugged in the windows drive solely and unplugged the linux drive, and low-and-behold, fedora sees the windows drive. This is getting slightly confusing at this point as both the hard drives are identical. I can't see why the installer would recognise one but not the other. Yet it recognises the extra 320GB of hard drive space if both drives are plugged in and device mapper tries to raid them. I tried the debian installer to see if it had the same problem, but it was able to see and install on this drive. I would have tried OpenSUSE as well but this computer doesn't have a DVD drive.
I haven't tried a "nodmraid" boot option yet, so I am going to try that tonight, but I'm interested to hear what the community thinks of this problem.
System Specs:
DFI LANParty UT NF680i LT SLI-T2R Intel Q6600 Corsair XMS2-800 2x2GB 2 x Seagate Barracuda 320GB
I've also had a 640GB plugged in that was detected fine (probably because dm didn't try to raid it being the odd hdd out) but has been removed while I'm troubleshooting the fedora install.
I'm using fedora 12 alpha live-usb. and because of space limitation, I don't want to install some applications that I need(say gcc, gdb,..? ) Is it possible to run application from my hard drive which I have installed fedora 11?
I have an 320GB hard drive with F11 installed. Lately, I got a 1.5TB new hard drive, on which I have installed F12. Now I want to use the 320GB as a second hard drive since I have lots of data on it. My question here is as I boot my desktop, how does it recognize to boot from the 1.5TB and consider the 320GB as a secondary? Is there anything I need to setup in BIOS? My motherboard has one extra SATA connection left for a second hard drive.
I have two 3 hard drives, one with Linux Mint, one with Fedora, one with Windows. For some reason, I can only choose Mint or Windows in the menu at the start. Also, when I boot on mint, I see my hard drive with Windows:
320 GB Hard Drive: 320 GB Filesystem.
But for the hard drive with Fedora I only see:
1.0 TB Hard Drive: 524 MB Filesystem.
From Mint I can go in this filesystem and there is a folder name Grub, can I take the info there and paste it into Mint's grub ? If so, how ?
I am having issues mounting my non-OS hard drive (/dev/sda).I had the following information in my /etc/fstab file:/dev/sda /mnt/storage auto defaults 0 0This worked as expected; however, I decided the modify this so I can have it automounted to my home directory (/home/jesse/storage)./dev/sda /home/jesse/storage auto defaults 0 0This /mnt/storage remains intact even after rebooting the system.
I'm new to Fedora. Is there an instruction manual. I'm using Fedora 14. I found under documentation a manual for musicians and amateur radio enthusiasts, but not for regular users. I'm using a black widow, which is a holder for hard drives that connects thru USB. I'm trying to mount it. The file system is Ext4.
I cloned a Fedora 12 hard drive to a new hard drive using Seagate DiscWizard. Everything appeared to go well. However the new hard drive will not boot. How do I make it bootable?
I have just installed Oracle Enterprise Linux. (which i believe is build on redhat). This copy of linux is installed on one hard drive, in the system there is another hard drive and also an SSD.
How can I mount the SSD and other hard drive so that I can read and write to them?
Unlike Windows, they dont simply appear under 'my computer'
It is not detected by windows xp and I have some data to recover it I have tried in xp but not able to find any solution . since it is showing in Linux redhat but still I am not able to open it it showing Its format is NTFS and can't mount is there any way to read my data from this drive in Linux
Background is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
There are 3 IDE drives in this box. hda has Debian Lenny installed (with swap) and is to remain. hdb1 has a linux distro on it. hdb2 is a data partition and is to remain. No other partitions on hdb. HDD is data only (not really relevant but mentioned for completeness) The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
I just bought a brand new hard drive, installed fedora with no errors. However when I try to click on the hard drive i get this errorunable to mount physical volume, not a mountable file system, ( I only have 1 hard drive and fedora boots up fine so its got to be working)I installed hardware browser and no hard drives come up
however, I couldn't find a place in which it would really fit well. I have 2 hard drives, that I want to backup. I've heard of servers and things like that using a hard drive image. Is this similar to a disk image? What are the benefits of using hard drive imaging as opposed to using DVDs? And perhaps most importantly: how would I go about it using Fedora 10 (64 bit)?
I have been trying to figure out how to format my hard drive when I'm installing Fedora 11. When I boot from the live disk, all installation were done automatically, so I didn't see how I can do it. I tried googling it, but didn't find anything on how to do it either.
I'm installing fedora 12 on a laptop using the live cd, and I have a few questions about the encryption process.
First, I'd like to fill the drive with random data. I've read the fedora documentation and it suggests using the following command: dd if=/dev/urandom of=<device>. The installer didn't offer an opportunity to do this, so I opened a terminal and typed the command. I expected it to take hours on my 160 gig hard drive, but it only took about 3 minutes, and indicated about 600 megs of data had been written. Did I do it correctly? According to palimpsest, my boot partition is sda1 and the other partition is sda2, so that's the one ran the command with.
Second, I need some advice on what to encrypt. The installer shows me the following layout after I select encryption:
LVM Volume Groups
Hard Drives
I know I can't encrypt boot, but I can encrypt lv_root and lv_swap. But is it necessary to do that? And tell me the pros and cons of using a boot loader password?
My new fedora 12 often freeze up for new reason. Not heavily loaded, no back end servers running. I suspect maybe my new harddrive has some problem. Could someone recommend a good hard drive diagonise tool?
I installed Fedora 12 and it won't reboot from hard drive. It boots only from installation CD. I have motherboard MS 6163 and graphic card Nvidia TNT2 pro. Do I have to change something in BIOS setup? If I need to install another driver for NvidiaAnd, please tell me if some other Linux package is better for my hardware.
I have a Fedora 12 system running just fine (AMD box w/2 Maxtor 200 GB (PATA) hard drives. I have a spare 320 GB drive (fallout from a Windows box HD upgrade) and would like to replace 1 of the 200 GB drives in the Fedora system. Is there an easy, straightforward way to do this w/out messing up the system?
