You can add a user with their password in one go, just use the -p option:
useradd -p '$1$S5P0QMGg$1RJ8yBPnDvyJ0SynNkESL1' mruser
The above password hash is for the word: password The easiest way to hash your password would be to grab it out of /etc/shadow
I am trying the same with the ks.cfg for RHEL5.4, but the users dont seem to get creted, after I login.
useradd -p <ENCRYPTE_PWD> username
I have bits and pieces but I'm wondering if anyone could post a step by step way to add a user using vipw? It seems handy to know. And am I correct in saying that the user added with vipw could then be added to a group using vigr?
View 1 Replies View RelatedWhen i create a new user i want this user to have a public_html directory created in their home.
View 5 Replies View RelatedI am running an updated Lenny. Just discovered that as user I am able to add new users via gui:
System > Administration > Users and Groups.
I was under the impression adding new users was restricted to root. Is this is a bug, and if so who do I report this to?
I use this command line to add an FTP user:
useradd ftpuser1 -d /userdir
This works, but I don't want to give Shell access to the users.
I tried this:
useradd ftpuser1 -d /userdir -s /sbin/nologin
but then user can't login at all - not into FTP and not into Shell.
Basically if you go through System > Administration > Users and Groups then I do not get prompted for a password, I cannot see the root account, nor can I add/modify other accounts.
I understand that Ubuntu has now moved away from allowing the root account desktop access which is ok by me even though it's very much in line with something Apple would do. (odd that this comes right after Ubuntu went all apple style with the default theme too.) However, I would like to add other accounts to the machine, for my wife and anyone else i choose for example. Anyways, pushing the "add" button does nothing. Thankfully the "help" button did work which allowed me to do the following workaround.
I managed to get around this by working through the command prompt, open terminal:
user> sudo -i
type in your password
root> users-admin
This allows the addition of accounts, also seems it allows the root account to be enabled though I haven't bothered to test it. The one thing I'll say is that it runs VERY SLOW!
I want to add users from the command line, I know I can use the adduser for individual users, but if you have 50 or more there must be another way. I'd rather not use the GUI.
View 2 Replies View RelatedI've been asked by my professor to add the list of users to a linux server (not sure of the OS type I think he said debian) but anyway. He gave me this script to add users.
Code: #!/bin/bash
# Script to add a user to Linux system
if [ $(id -u) -eq 0 ]; then
read -p "Enter username : " username
read -s -p "Enter password : " password
egrep "^$username" /etc/passwd >/dev/null
if [ $? -eq 0 ]; then
echo "$username exists!"
exit 1
else
pass=$(perl -e 'print crypt($ARGV[0], "password")' $password)
useradd -m -p $pass $username
[ $? -eq 0 ] && echo "User has been added to system!" || echo "Failed to add a user!"
fi
else
echo "Only root may add a user to the system"
exit 2
fi
I need to see if I can get this script to read a file that list the usernames and their passwords using the pipe command (or some similar command) so I can just do it in one batch. I've done some searching but there are so many vairiations of the code that I've confused myself. Also, I'm not too familiar with linux, it's been a few years since I've used it but in the prior script, I need to add the users to an existing group named "forensics". Which line would I change/add in order to do this?
i'm working on a small servermanagement app in php to manage the ubuntu server. Someone told me I have to use the shell_exec() command in php to execute the commandlines in ubuntu.
I did a ping test wich works... PHP Code:
[code]....
But I can't seem to add any users. When I list my user using "users" command in ubuntu, I only see my loginname. How do I add users using php?
I am using Mandriva 2010.2 KDE. When I try to change my password, using the Welcome>About Me>Change Password, I am asked to type in my current password, after I press OK, the dialogue box just seems to hang, nothing happens, the computer does not freeze, just the password dialogue box kind of stops responding.
View 3 Replies View RelatedI have recently installed CentOS on my server and I am trying to install a Teamspeak server as well as a web server using ISPConfig. But, for installing a Teamspeak server I wanted to create the user account "teamspeak" to run it so my files under root are not accessible for security reasons. I was wondering if there was a way of creating the user teamspeak with a disabled login, I know in Ubuntu to do this you do: adduser --disabled-login teamspeak
View 6 Replies View RelatedI have server 9.04 and joined thru winbind to Windows Domain and subversion installed.Windows AD users can use their own credentials to join and everything is working fine.However the group svn which is used to access the repos in /etc/groups has some users.However I would like to add the domain users group to the svn group but the domain users contains Space. And /etc/groups does not happend to read the space any ideas on how to add "domain users" to the svn group in /etc/groups
View 1 Replies View RelatedI was just trying to add new ssh users for tonight session and really messed up badly. I first installed package ibsh (iron-bars shell). I didn't know how to use it so I just went to a new user account and added ibsh at the end of his .profile. (I wrote
Code:
sudo gedit /home/username/.profile
which I suspect is the problem, I should have written
Code:
gksu gedit /home/username/.profile
??)
Well graphical logging became impossible in my own account until I did the following in my own account:
Code:
chmod 777 .profile
chmod 777 .ICEauthority
But desktop is still empty. I have restarted the system. I cannot use Firefox (it works without output for 10 sec and then dies). Chromium says something like "Problems due to not being able to update profile" but works. (I cannot see any files on desktop. But if I do places > desktop I can see them.) All the mentioned files had -------- for permissions so I did:
Code:
chmod 777 ~/Desktop/*
How to get my system back to normal. I think I got botched up permissions. If I create new user accounts, I get several error messages in these accounts.
Idealy I want to create a batch file which would read the list and create a user and a password.
I know i need to create the file using the vi command and using the useradd facility to add the users however where i go from there i am lost.
I currently have an LDAP database on my Suse 10.2 server for managing authentication and controlling emails for my Cyrus email server. I use this setup to provide email functionality to my web and email hosting clients, as well as DNS functionality, and it uses the default LDAP database that was setup when OpenLDAP was initially configured. Email support is working wonderfully, I might add. I also tested and verified the use of an email lookup directory in two different email clients (Outlook and Evolution) so that I can tell one of my clients how to lookup the email address of users who are setup in the LDAP server, and it works beautifully.
However, I'd also like to be able to allow my clients to build a shared contact database that can also be used in their email clients so that they can share them among all of their users. Ideally, I would need to be able to allow each client to have their own database of shared contacts, and I assume this would be done by creating a new LDAP database for each client company (i.e. group of users) that can contain the list of shared contacts for any of that client's users. When they configure their email client directory settings, they would enter the base path to their database in order to retrieve their shared contact database entries.
In my web searches, I've found plenty of CRM solutions on the web that claim to provide this type of functionality, but I believe that OpenLDAP contains everything I need to make this work without adding another layer of software to the server solution. (I subscribe to the "Keep it Simple, Stupid!" approach whenever possible.) Essentially, I need to have People entries in a client's LDAP database that are NOT email users on the system. The fields in the standard people schema are all the fields they would need - as long as I can figure out how best to add these non-user entries in the LDAP database. Are there any potential difficulties in creating additional LDAP databases expressly for this purpose?
Are there any tricks to adding contact entries into a client's LDAP database without them also being current email users on the server, so that those entries can be retrieved through an Email Client directory lookup? I will also want to provide an easy method for my client users to add new entries to their LDAP contact database, most likely through a web interface for them that could then issue LDAP commands on the server based on the input fields for the new contact. (I don't believe this is possible from within the email client itself.) Is there any reason this could not be done with the proper configuration? What should I be aware of as I setup this contact management web interface? Is there a better way for non-technical client users to manage this list of shared contacts?
I installed and configured LDAP server and client on RHEL5 successfully. Problem is that when I add more than one user on server and clients, It shows error 'invalid user'.When I run the command:-#chown -R user:users /home/user, It shows error 'invalid user'. by step for adding and modifying more users in ldap servers.
View 1 Replies View RelatedI'm running 64-bit 10.04, upgraded from 9.10. The problem I am experiencing is that any user accounts aside from my main account are problematic. This includes any accounts I add, as well as the GDM guest session.The specific problems that I have thus far experienced are as follows:
1. The desktop loads often improperly. In the latest instance of this the graphics on the right side top panel were randomly chopped-up, leaving parts of my clock on either side of the volume control, among other things. 2. If I make ANY customizations to the desktop at all, the desktop takes nearly a full minute to load on log-in. 3. Flash videos don't work properly on Firefox. Sometimes they only play after refreshing a page, often they will not load at all. Also, attempting to load or play a flash video will sometimes causes Gnome or Firefox to crash. 4. (And this is the one that REALLY has me stumped) Whenever I log into my main accountant after logging out of another account, the IBus control appears in my system tray.However, when I open the IBus preferences the associated check box is (and has always remained) unchecked.Not sure where to go with this one. More than anything, the IBus bug makes me unsure of where to even begin looking for the problem.
I have Ubuntu 10.04.2 (Linux 2.6.32-33-server on x86_64) with OpenLDAP 2.4.21 and Webmin1.550. I converted my ldap database from another system with the older style schema (OpenLDAP 2.3.3 with slightly older Webmin version 1.480) and no longer use slapd.conf, but the newer slapd.d format.
It all works fine except for one thing. When I add a new user, it lets me type in the additional LDAP fields:
But when I click the Create button, all the fields get jumbled together in the Title/Position box with a diamond question mark delimiting the fields:
Modifying existing users (which have the Additional fields displaying correctly) also has the same result - it moves the fields all into the one Title/Position box with the diamond shapes with question marks inside between each entry. Is it a problem with my schema files? I tried reverting to the older shema files and slapd.conf and it still did the same thing on the new system. I am really at a loss.
Here is also the output of ldapsearch for that user (host and samba ids are sanitized):
Previously added users that show the fields properly have "description:" and then the field listed for each Additional LDAP field. Also shouldn't the "title" be visible in plain human readable text here? - it looks like it encrypted it somehow - similar to a password hash. The older system works fine and the fields are all readable and in their proper locations. But the new system just doesn't work right.
I have no fracking clue what my password is and I want to create multiple user accounts. I have no idea whether or not I need to re-install the OS or what..nor can I even begin to imagine how to do so without a CD drive..I should also note I didn't start her up myself.
View 1 Replies View RelatedI've installed rubygems on ubuntu, but it has a known issue that the rubygems' bin/ directory is not in the PATH. I know about exporting the PATH variable, and adding it to .bashrc, but I'd like to configure it so that every user has it on his PATH, even if he tries to run it with sudo. Where should I export the PATH variable then?
View 2 Replies View Relatedi just want to prevent from now on from all users maybe even root from adding other users to groups like wheel for example. I also want to know how can I prevent from all users to create new groups or add users to new one.real
View 2 Replies View RelatedSamba up and running on my pc. pc runs FC12 with kde. A laptop has win vista. The pc can access the shares on the laptop but the laptop has authentication issues to access the pc. Note that windows doesnt enforce authentication forincoming network connections.Using the system-config-samba util i tried to map a windows user to the unix user "feduser". The laptop (named LAPPY) has a user (lapuser) which has on windows no password.What should I tell samba config what the windows username should be? lapuser or LAPPYlapuser doesnt work because when accessing the pc via the laptop, the authentication fails. The only auth that is successful is when choosing the same winusername as the unix username.
Secondary, id like to setup the laptop so that the user doesnt have to provide a name and password, or at least not more then once in the lifetime of the laptop. Note that you cant provide an empty password to system-config-samba. How is that possible?
Strange but not really on issue imho:the samba - KDE control module(kcmshall4) (and the smb.conf) shows 2 shares: the homedirs and the data dir the samba server configurator (system-config-samba) shows only the datadir.
Is it possible to map a remote user to a local user in SSH? The object is to avoid using $ssh user@server and instead just do $ssh server instead.
View 4 Replies View RelatedHow can i see history of all sudo users and all root users in fedora 13 ? history command only shows one users history ?
View 5 Replies View RelatedI have not used Fedora in a long while (since version 5 I think).I am moving back to it for my new home server but there is something that is driving me completely crazy. Can you no longer do HDD installs from a ISO?I whipped out my old kickstart files and worked off of them and all seams to be OK but every time it says it is unable to find the install source.Here are the first two lines of my KS file:
Code:
install
harddrive --partition=sdb1 --dir=/linux_install/fedora/iso
[code]....
I cannot kickstart my computers using the pxeboot The pxeboot is working The kernel is loaded, however, the network manager is not able to get the IP, however, 10 seconds before the PXE was able to get. I do not receive a request on my network
I have messages as
device state change 2->3 (reason 40)
...
device state change 3->4 (reason 0)
...
device state change 5->7 (reason 40)
Timeout
The strange this, if I inserte a stupid switch everything is working.
Here's the error I'm getting:
Code:
Package xine-lib-pulseaudio is obsoleted by xine-lib, trying to install xine-lib-1.1.18.1-1.fc12.i686 instead
error: not an rpm package
umount: /var/tmp/imgcreate-k0CsZq/install_root/var/cache/yum: device is busy.
(In some cases useful info about processes that use
[Code].....
I am trying to kickstart the F13 alpha from a usb drive.The usb drive is labeled "disk" and is setup with extlinux and can boot fine.My laptop has one hard drive (sda) and the only other drive is the usb (sdbThe ISO is copied on the root of the usb diskI extract the boot files from the F13 Alpha ISO and copy them on the disk also
Code:
cp /mnt/ISO/images/install.img /media/disk/images/install.img
cp /mnt/ISO/isolinux/vmlinuz /media/disk/boot/Fedora/.
[code]....
Which directly is accessible during the %pre section? I try to use wget to retrieve a file from FTP to /root but after the machine is build, I don't see that file in /root directory.
View 3 Replies View RelatedI want to install Red hat based custom OS in a complete automated mode.I ll have my kick start file inside the CD rom and when I boot with that ISO or CD.The OS should start installing by taking parameters from the kick start file without having to specify the path of the kick start file inside the CD.like "linux ks=<path>".Is it possible to achieve this by writing any script or something so that when the CD boots the kick start path is passed automatically to the anaconda installer.
View 5 Replies View Related