Red Hat / Fedora :: Root Search Path ?
Aug 31, 2010I am trying to find the permissions of the directories in the $PATH variable.
I am trying to use the following:
ADVERTISEMENT
Fedora :: Search Path - Yum & Rpm Commands Fail When Executed As Root
Jul 15, 2009I've setup dimdim (opensource, centos 5.3) and noticed yum & rpm commands fail when executed as root because it uses librpmio from openoffice3 instead of /usr/lib (I'm running from memory so I may have misstyped). But sudo doesn't have this problem.
How can root's search path be different, especially after I state /usr & /usr/lib at the top of /etc/ld.so.conf.
Fedora :: Search Path For 'sh'?
Sep 7, 2011I would like to run a script from any location. The script is in ~/scripts, so I added ~/scripts to my PATH. However, since I have to run it with 'sh script.sh' (due to the permissions on the directory), it doesn't seem to look in PATH for the file script.sh. Is there a way to get it to do this?
View 11 Replies View RelatedFedora :: DNS Search Path Deleted?
May 13, 2010I am trying to setup DNS domain name in my server (Fedora), which has static ip address.First, I put the DNS domain name in system-config-network->DNS->DNS search path. After restarting the network, it is deleted automatically.second, so I put the DNS domain name in /etc/resolv.conf as search mydomainname . After network restart, it is also deleted automatically.In both case domain name did not work (i.e, I can't connect to my server from outside using domain name, I can by ip address, internet is working fine).However, I found that the domain name is written in /etc/sysconfig/network-scripts/ifcfg-eth0 with search=mydominaname.
View 5 Replies View RelatedFedora :: Nautilus - Search In The Current Path?
Apr 10, 2010when i search in nautilus folder browser it search in my home path,how i can say to search in the current path?
View 2 Replies View RelatedGeneral :: Search For A Link To A Certain Path?
Sep 24, 2009I have a /data and /backup. on backup there is a folder called Info that has a bunch of data on it, but its not shared through Samba. So what I'm thinking is that on one of my Samba shares on data there is a folder which is really just a link to that /backup/Info folder. Is there an easy way to search through /data to see if there's a link to it, or do i have to manually go through and do a ton of ls's?
View 10 Replies View RelatedProgramming :: Search And Repalce A Char In Path Using Sed ?
Sep 1, 2009I have the following path wher i want to replace forward slashes with back slashes using sed path=/temp/file.tar
I am using the following but it's not working.
Ubuntu :: Lib Packages Not Found In Config Search Path
Aug 16, 2011 I just installed Netsurf, but I was confronted with "libnsbmp is not installed". So I installed libnsbmp.
The error "libnsgif is not installed" appeared when installing libnsbmp.
The error "libpng is not installed" appearded when installing libpnf.
...
I installed all that I was asked to install. However, when I was installing libcss, it said that "Package libparserutils was not found in the pkg-config search path. Perhaps you should add the directory containing 'libparserutils.pc' to the PKG_CONFIG_PATH environment variable". I have already installed libparsercutils but not in the /usr/lib dir.
What should I do to continue my installation? And anyone could tell me what are those lib stuff? I installed zlib with the apt-get install command.Can I get other lib stuff with the same command?
Programming :: Specify A Library Search Path To Configure's AC_CHECK_LIB?
Aug 31, 2010I'm writing an application and want to make possible to compile it with or without an optional module. This module requires perl library to be compiled, so I want to check presence of it in 'autoconf'.
The problem exists because perl library is placed in 'non-standart' location itself (like a /usr/lib64/perl5/CORE/libperl.so). So when I try to run configure (with AC_CHECK_LIB or AC_SEARCH_LIBS), it cannot find and link libperl.so in its test.
Trying to pass ./configure CFLAGS=-L/usr/lib64/perl5/CORE/ or ./configure LDFLAGS=-L/usr/lib64/perl5/CORE/
How can I define a location to search for configure's tests?
General :: Find Command To Search Wildcard In Path?
Dec 8, 2009I need a command to search for any file in a directory like so:
/home/*/upload/* and then change permissions any file in that directory.
Find doesn't seem to match what I need.
Programming :: How To Change - Add To - Library Search Path At Runtime
Jan 9, 2011I'm writing an application with a plugin architecture and would like modify (specifically add to) the dynamic library search path while the main executable is running.
The plugin paths are not known until the application is running so I can't set LD_LIBRARY_PATH ahead of time.
My understanding (although I haven't tested it) is that the executable will only parse the LD_LIBRARY_PATH once, early on, so modifying this environment variable at runtime will have no effect.
(Note - on Windows the solution is to modify the PATH environment variable)
I know it's possible to specify the full path to load a dynamic library, and this would work if the plugin(s) only had a single library to load, but some of them will have a bunch of libraries with their own inter-dependencies, so I'd like the plugin folder(s) to get added to the search path to pick up the dependant libs.
Software :: Custom Built GCC - Default Search Path For Stdlib
Jun 15, 2011I've just built gcc 4.6.0 by myself since there is no update in Mandriva yet and I really needed the updated version, but I must be missing something in its configuration. I added ~/apps/gcc460/bin in front of my PATH, and the lib dir to my LD_LIBRARY_PATH in my .bash_profile, like so:
Code:
PATH=$HOME/apps/gcc460/bin:$PATH:$HOME/apps/bin
LD_LIBRARY_PATH=/home/duckz/apps/intel/composerxe-2011.4.191/lib/intel64/:/home/duckz/apps/gcc460/lib/
LD_RUN_PATH=/home/duckz/apps/intel/composerxe-2011.4.191/lib/intel64/:/home/duckz/apps/gcc460/lib/
export PATH
export LD_LIBRARY_PATH
export LD_RUN_PATH
I still have gcc 4.4.2 installed, but it's now hidden, so gcc --version correctly yields 4.6.0. I finally tried to build my project, all went fine, but at the moment of running it I get:
Code:
./EugGame.Release.Linux: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by ./EugGame.Release.Linux)
I assume the correct version is the one located in ~/apps/gcc460/lib, but how do I make my project load the correct lib? Is it possible at all to have two versions of gcc on the same machine? I just found that I should've added lib64 to my LD_LIBRARY_PATH instead of lib. Anyways, even if the problem is solved, I'd like to hear if my configuration is well made or if I should leave LD_LIBRARY_PATH unset and use some other way to override the default search path for stdlib.
Networking :: Search Path In Resolv.conf Overwritten By The Hostname After Reboot?
Mar 19, 2009Before reboot,
$ cat /etc/resolv.conf
; generated by /sbin/dhclient-script
nameserver 172.20.10.22
search mycomp.local myhost.com
After reboot, the search path in resolv.conf is overwritten by the hostname.
$ cat /etc/resolv.conf
; generated by /sbin/dhclient-script
nameserver 172.20.10.22
search penguin
Fedora Installation :: Apt-get Search Wget Saying Invalid Operation Search?
Apr 5, 2011i guess this is an installation issue as i am newish to Linux and got a F14 laptop from a used/refurb store... Anyway it seem i have difficulty with getting GTK running or maybe it is WGET...?
i did manage to install apt-get and was able to run synaptics ... but now whenever i try to run synaptics it flashes the interface and crashes. i tried apt-get search wget and it says invalid operation search. i tried apt cache wget and get a crash box in the upper right corner... i tried apt-get gtk+extra-2.1.2-4.fc14 and it says invalid operation gtk...
All of which is frustrating my attempts to get the GTK interface to J working. Their script uses WGET which i also cannot get.
Red Hat / Fedora :: Appending A Path To PATH Variable Permanently?
Oct 21, 2010how to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
View 2 Replies View RelatedGeneral :: Given A File Path Search For File Exist?
Jan 27, 2011I have file which consists of many files with their path,i need to check for the file exists in the given path,how to check?
View 12 Replies View RelatedServer :: Root PATH Isn't Right, Can't Change?
Apr 2, 2010After upgrading to CentOS 5.4, my root path seems screwed.The issue is present for CRONJOBs that run as the root user as well as when I su to the user through SSH.
I need the following path ALWAYS:
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin
It currently only gives root:
[code]....
General :: Find/search Root Partition ONLY?
Jun 11, 2010Say I need to do: find / -name somefile.txt
And say root partition / is mounted on /dev/sda5; however, let's say I also have 250GB partitions (/dev/sda6, /dev/sda7) mounted in /media - AND another location that I cannot currently remember. Say, also, that I know the file I'm looking for is on /dev/sda5.
Obviously, the above command will also descend in /media and that other directory which represent the big partitions, wasting time in looking for the file in the wrong place.
Is there a way to instruct find (or other command) to search only / on /dev/sda5, and NOT to descend to directories if they are on different partitions ?
General :: Search The Root With Everything Treated As Lowercase First?
Jan 6, 2011I would love to see if there is a way in linux that if I have forgotten the command name and would like the search the entire root using "find" command but I am not sure of the case sensative of the command name (eg. VBoxManager or vboxmanager). So how can I search the root with everything treated as lowercase first? or is there a regular expression to search?
View 4 Replies View RelatedUbuntu :: Add PATH Variable In Root Terminal
Mar 16, 2010I want to add a path (/usr/sys) to the global $PATH. I will use this to test commands and scripts, which I don't want to be mixed up with regular commands. I've added the path to /etc/environment. When I start a terminal session under my user account, the path is included in the $PATH variable. However, when I start a root terminal, it is not. Is there a way to to change $PATH on one place where it will also affect the root terminal, or do I have to change it on 2 locations?
View 4 Replies View RelatedUbuntu :: How To Set Python Path For Root User
Aug 11, 2010How do I set the PYTHONPATH for the root user only? Or at least add to the python path for the root user? I need to read from the /var/log/apache2/access.log in my python script, so I need to use sudo for my script to be able to read from it.I tried setting the PYTHONPATH in /root/.bashrc but that didn't work. I don't want to use a .pth file because I don't want the directory to be on the path for all users due to import collisions.
View 6 Replies View RelatedSoftware :: Permanently Add Path To Root Via Script ?
May 10, 2010I'm working on my first .deb package. I need to add the /usr/sbin directory to $PATH for root. I think the easiest way to accomplish this is to add a little code to the postinst file.
View 5 Replies View RelatedGeneral :: Potential - With Adding /usr/local/[s]bin To Root's Path?
Mar 2, 2011I've noticed that the root account $PATH does not include /usr/local/bin or /usr/local/sbin by default. Are there any potential issues that could arise from adding those directories to the path? If so, what is the best way to make sure your shell finds executables in those directories, without affecting the stability and security of the system?
View 2 Replies View RelatedGeneral :: Adjusting $PATH In /etc/profile Does Not Affect Root
May 25, 2011I added a directory to the $PATH variable in /etc/profile. This works for my user account but not for root. It's easy to add it to my /root/.bashrc but I would like to understand whats's wrong. It's a widely unmodified Debian 6 so I think my changes should do the trick.
Here is what my /etc/profile looks like:
# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
if [ "`id -u`" -eq 0 ]; then
[code]....
Edit: The path I added is the distcc-stuff. Here is what echo $PATH tells me:
$ echo $PATH
/usr/lib/distcc/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Ubuntu :: Set Java Path For All Users - Including Root
Jan 27, 2010I am trying to set my java path so that it is in effect for all users including the root user. I set the path correctly in /etc/profile and that works for my personal user, but when i try to run the same commands using sudo, i get messages saying that it can't find the java path.
View 3 Replies View RelatedCentOS 5 Networking :: How Do I Set Sbin In Default Path For Non Root User
Jun 25, 2009I'm running a server with CentOS 5 where the software that needs to run on the server uses ifconfig to verify the system IPv4.The problem is that /sbin isn't set for the user that is supposed to run the software (sadmin) which means the software can't execute ifconfig and thus terminates.now the workaround I've been using is simply to input.
View 10 Replies View RelatedGeneral :: Difference Between PATH=$PATH:$1 & PATH=$1:$PATH?
Jan 16, 2011I found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
Fedora :: Add Path In .bashrc By Commenting Out Old Path And Adding New One - Command Source ~/bashrc
Jun 14, 2011When I add some path in .bashrc by commenting out old path and adding new one like this:
#EXPORT HOME_PLAY=/home/gem/old_play
EXPORT HOME_PLAY=/home/gem/play
EXPORT PATH=$PATH:HOME_PLAY
After saving above changes, I enter the command: source ~/.bashrc Now if I do echo $PATH, the path shows both the old PLAY_HOME and new PLAY_HOME. This is really bad and messes up a lot of things in my project. This problem only goes away if I logout or reboot, a rather very long process. What is happening is that the old path is added to new path element and the old path includes the old path element you want to remove.
Fedora :: 12 And VMTools - The Path "" Is Not Valid Path To The Gcc Binary
Mar 23, 2010running Windows 7 64bit with VMware Workstation 7.01-build 227600. I have some knowledge of Linux, I have installed f12 and have updated the system as of 03/22/2010. All updates completed successfully.
1) How do I install VMTools on the f12 (after mounting the CD/DVD tool package)
2) How do I update the gcc files it says are dependencies?
Here's what I get on installation:Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
and then I am prompted for this input from the install script:
Searching for GCC...
The path "" is not valid path to the gcc binary.
Would you like to change it? [yes]
and this is where I get stuck. How do I get around this or satisfy the requirements for the install?
Server :: Apache Root Path Reference "/"?
Jul 13, 2010I have 2 machines A and B that are identical (supposedly). I have a file /var/www/html/pca.jarI have a page /var/www/cgi-bin/work/view.cgi
Only the following html works on machine A
<applet code="MainAppApplet.class" archive="/pca.jar" width="550" height="400" name="myApplet" MAYSCRIPT>
[code]....