I have a /data and /backup. on backup there is a folder called Info that has a bunch of data on it, but its not shared through Samba. So what I'm thinking is that on one of my Samba shares on data there is a folder which is really just a link to that /backup/Info folder. Is there an easy way to search through /data to see if there's a link to it, or do i have to manually go through and do a ton of ls's?
View 10 RepliesI need a command to search for any file in a directory like so:
/home/*/upload/* and then change permissions any file in that directory.
Find doesn't seem to match what I need.
I would like to run a script from any location. The script is in ~/scripts, so I added ~/scripts to my PATH. However, since I have to run it with 'sh script.sh' (due to the permissions on the directory), it doesn't seem to look in PATH for the file script.sh. Is there a way to get it to do this?
View 11 Replies View RelatedI have file which consists of many files with their path,i need to check for the file exists in the given path,how to check?
View 12 Replies View RelatedI am trying to setup DNS domain name in my server (Fedora), which has static ip address.First, I put the DNS domain name in system-config-network->DNS->DNS search path. After restarting the network, it is deleted automatically.second, so I put the DNS domain name in /etc/resolv.conf as search mydomainname . After network restart, it is also deleted automatically.In both case domain name did not work (i.e, I can't connect to my server from outside using domain name, I can by ip address, internet is working fine).However, I found that the domain name is written in /etc/sysconfig/network-scripts/ifcfg-eth0 with search=mydominaname.
View 5 Replies View RelatedI am trying to find the permissions of the directories in the $PATH variable.
I am trying to use the following:
when i search in nautilus folder browser it search in my home path,how i can say to search in the current path?
View 2 Replies View RelatedI have the following path wher i want to replace forward slashes with back slashes using sed path=/temp/file.tar
I am using the following but it's not working.
in order to play "Gish" - I need to cd .gish./gish- otherwise it won't find it's files - it need the working path, how can I put that in a sigle line in my games menu ?
View 2 Replies View Related I just installed Netsurf, but I was confronted with "libnsbmp is not installed". So I installed libnsbmp.
The error "libnsgif is not installed" appeared when installing libnsbmp.
The error "libpng is not installed" appearded when installing libpnf.
...
I installed all that I was asked to install. However, when I was installing libcss, it said that "Package libparserutils was not found in the pkg-config search path. Perhaps you should add the directory containing 'libparserutils.pc' to the PKG_CONFIG_PATH environment variable". I have already installed libparsercutils but not in the /usr/lib dir.
What should I do to continue my installation? And anyone could tell me what are those lib stuff? I installed zlib with the apt-get install command.Can I get other lib stuff with the same command?
I'm writing an application and want to make possible to compile it with or without an optional module. This module requires perl library to be compiled, so I want to check presence of it in 'autoconf'.
The problem exists because perl library is placed in 'non-standart' location itself (like a /usr/lib64/perl5/CORE/libperl.so). So when I try to run configure (with AC_CHECK_LIB or AC_SEARCH_LIBS), it cannot find and link libperl.so in its test.
Trying to pass ./configure CFLAGS=-L/usr/lib64/perl5/CORE/ or ./configure LDFLAGS=-L/usr/lib64/perl5/CORE/
How can I define a location to search for configure's tests?
I'm writing an application with a plugin architecture and would like modify (specifically add to) the dynamic library search path while the main executable is running.
The plugin paths are not known until the application is running so I can't set LD_LIBRARY_PATH ahead of time.
My understanding (although I haven't tested it) is that the executable will only parse the LD_LIBRARY_PATH once, early on, so modifying this environment variable at runtime will have no effect.
(Note - on Windows the solution is to modify the PATH environment variable)
I know it's possible to specify the full path to load a dynamic library, and this would work if the plugin(s) only had a single library to load, but some of them will have a bunch of libraries with their own inter-dependencies, so I'd like the plugin folder(s) to get added to the search path to pick up the dependant libs.
I'd like to get path of one library to link it dynamically in my program. Probobly the best way would be to add macro to my configure.ac file.
View 2 Replies View RelatedI've setup dimdim (opensource, centos 5.3) and noticed yum & rpm commands fail when executed as root because it uses librpmio from openoffice3 instead of /usr/lib (I'm running from memory so I may have misstyped). But sudo doesn't have this problem.
How can root's search path be different, especially after I state /usr & /usr/lib at the top of /etc/ld.so.conf.
I've just built gcc 4.6.0 by myself since there is no update in Mandriva yet and I really needed the updated version, but I must be missing something in its configuration. I added ~/apps/gcc460/bin in front of my PATH, and the lib dir to my LD_LIBRARY_PATH in my .bash_profile, like so:
Code:
PATH=$HOME/apps/gcc460/bin:$PATH:$HOME/apps/bin
LD_LIBRARY_PATH=/home/duckz/apps/intel/composerxe-2011.4.191/lib/intel64/:/home/duckz/apps/gcc460/lib/
LD_RUN_PATH=/home/duckz/apps/intel/composerxe-2011.4.191/lib/intel64/:/home/duckz/apps/gcc460/lib/
export PATH
export LD_LIBRARY_PATH
export LD_RUN_PATH
I still have gcc 4.4.2 installed, but it's now hidden, so gcc --version correctly yields 4.6.0. I finally tried to build my project, all went fine, but at the moment of running it I get:
Code:
./EugGame.Release.Linux: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by ./EugGame.Release.Linux)
I assume the correct version is the one located in ~/apps/gcc460/lib, but how do I make my project load the correct lib? Is it possible at all to have two versions of gcc on the same machine? I just found that I should've added lib64 to my LD_LIBRARY_PATH instead of lib. Anyways, even if the problem is solved, I'd like to hear if my configuration is well made or if I should leave LD_LIBRARY_PATH unset and use some other way to override the default search path for stdlib.
Before reboot,
$ cat /etc/resolv.conf
; generated by /sbin/dhclient-script
nameserver 172.20.10.22
search mycomp.local myhost.com
After reboot, the search path in resolv.conf is overwritten by the hostname.
$ cat /etc/resolv.conf
; generated by /sbin/dhclient-script
nameserver 172.20.10.22
search penguin
I found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
I use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
I have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies View RelatedWhenever we insert CD,it creates a shortcut link in desktop.Can we list this link name by using any command? I am using Oracle Enterprise Linux 5.0.
View 10 Replies View RelatedI have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedCurrent script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
I have searched around and am trying to understand the difference between a hard link and symbolic link (soft link). I found this link is quite useful. But I am still not very clear. I understand soft link is not a copy of original file, but is a hard link a copy or not?
View 4 Replies View Relatedkernel 2.6.21.5, slackware 12.0
GNU bash 3.1.17
Code:
As you can see, /usr/local/bin is in the path. However, bash does not look for nasm in /usr/local/bin.
If I am root, things go well:
Code:
i guess this is an installation issue as i am newish to Linux and got a F14 laptop from a used/refurb store... Anyway it seem i have difficulty with getting GTK running or maybe it is WGET...?
i did manage to install apt-get and was able to run synaptics ... but now whenever i try to run synaptics it flashes the interface and crashes. i tried apt-get search wget and it says invalid operation search. i tried apt cache wget and get a crash box in the upper right corner... i tried apt-get gtk+extra-2.1.2-4.fc14 and it says invalid operation gtk...
All of which is frustrating my attempts to get the GTK interface to J working. Their script uses WGET which i also cannot get.
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
View 2 Replies View Relatedi only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
View 9 Replies View RelatedIn the ordering of files I keep I need links to directories. Sometimes I even need to move directories to new locations. I have tried using symlinks, but they become dead when I move the directory they point to. I have tried hard links, but I haven't found any Linux file system that would support hard linked directories. How can I achieve that a complex structure of directories (currently with symlinks for directories and hard links for files) keep symlinks live when directories are moved?
- is there any utility that updates symlinks when a directory is moved?
- is there any Linux filesystem that supports hard linked directories?
- is there any good Linux interface to the new NTFS (the only file system I know to support automatically updating directory links, called directory junctions)?
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
View 9 Replies View Related