Red Hat / Fedora :: MySQL And RHEL 5.3 - Command Not Found
May 24, 2010
Currently I'm using RHEL 5.3 in my server. Last time I install MySQl Server and it working fine.Then i facing a problem with my server and i reinstall back RHEL. But i didnt use MySql package inside the CD to install MySQL. i install MySQl separately. I download from MySql website. My problem is, i success install MySql in my server. The service also running. But when i type.
mysql -u root password
it said, command not found.
View 4 Replies
ADVERTISEMENT
Jan 16, 2011
I have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
View 6 Replies
View Related
May 13, 2011
I have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
View 6 Replies
View Related
Mar 20, 2010
I have recently installed F12 in my HP Pavilion laptop. I am facing strange problem when I am trying to give a wrong command in terminal.
When I give the wrong command it says "command not found" but waits down instead of showing the prompt.
[codingfreak@localhost ~]$ e
Command not found.
View 11 Replies
View Related
Feb 28, 2010
when i try to use apt-get, It says command not found. Did I installed RHEL in wrong way or do I need to configure any file.
View 8 Replies
View Related
May 1, 2009
Which package provides easy_install? I seem to have python-setuptools installed but can't seem to find easy_install?
View 3 Replies
View Related
Jan 16, 2010
The goal is to do:
sudo apt-get install Virtualbox
sudo apt-get virtualbox
sudo aptitude install virtualbox
ive tried all those combinations and they all shoot back the same reply:
sudo: apt-get: command not found
Every forum ive read says that my Fedora installed wrong and that i am screwed. Can anybody help me with this please?
Also does anyone have a link to download a free windows xp iso for virtualbox to run off of?
View 8 Replies
View Related
Jun 1, 2010
I've installed the latest Fedora 13 flavour, yum update completed, yum install samba -y
all installed fine.
yum list grep samba shows samba-13 installed however when type smbclient as root it returns
"Command Not Found" and returns me to bash.
yum remove samba
reboot
yum install samba
still nothing
smb[tab] returns : smbd, smbusers and 3 others but none that are smbc*. I'm kinda stuck for my windows shares at this point.
smbd i presumed was the deamon so i triggered that but smbclient still cant be found and when i ran smb(something) status it stated that the samba service was up and running.
users list is configured but i believe this is an issue with the command.
View 3 Replies
View Related
Aug 11, 2011
I'm attempting to install the Oracle Sun Ray Server Software on Fedora 15 and I've done the majority of the install and config however, the system is coming up with an error that the gdmdynamic command is not found??
Apparently this comes with gdm but I couldn't find a package correlating to this command.
Apparently it comes with Gnome/GDM.... I don't have Gnome installed in the system but do have GDM!
View 8 Replies
View Related
Feb 8, 2010
I am new to mysql can some one provide me the documentation or some recommended links to start the configuration of mysql server on RHEL. Also if I get the database schema, how can I replicate the same in my machine. Any documentation for this?
View 8 Replies
View Related
Nov 8, 2010
I recently installed Fedora 14 from KDE live CD . everything is working excellent except when I tried to do lsmod today, I got lsmod:command not found error.I checked and found that PATH did have /sbin and /sbin/lsmod does exist. But /sbin/lsmod points to /bin/lsmod (which does not exist)I did whatprovides on lsmod and found module-init-tools-3.11.1-2.fc13.i686 as the package.
View 1 Replies
View Related
Mar 12, 2010
I am new to Linux i am installing cvs in it.
I am facing the below problem:sudo /etc/init.d/xinetd reload sudo: /etc/init.d/xinetd: command not found. /etc/init.d/xinetd restart /etc/init.d/xinetd stop.
View 5 Replies
View Related
Jan 13, 2010
For some reason crontab does not work on my system.
Fedora Core 11
I am running from a Virtual Private Server.
Code:
Code:
View 2 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Feb 28, 2009
I decided to switch from Ubuntu to Fedora Core 10 KDEdual boot installation worked perfectly... all smooth!untill i got to installing things....i wanted to install ndiswrapper, so i manually downloaded it on my second pc and transferred it trought a USB stick to the Fedora PC. When reading the 'installation manual' it clearly uses the "make" command a lot...problem is; bash error: "bash: make: command not found"So i google this and i get some solutions, all involving online repositories...so basically... i need internet to get the MAKE rpm, and i need the MAKE rpm to get the internet working... :')I tried searching online repositories but i haven't got a clue about what i need to download from there (to get the make command, or the "Development Tools") and how to install it on my fedora pc....i need help :P It would be much appreciated if someone could explain me how i could get these important packages up and running on my system with manual downloading and installing.I haven't got a clue how to do this manually... I've been on it for hours allready and I'm getting a bit fed up with it I can't understand why such an important package isn't standard included in the installation.
View 14 Replies
View Related
Dec 9, 2009
I've been using linux for a long time, and I just ran into a problem that has me stumped. Any time I mistype a command, it says "Command not found."... yea, I know that's normal. But it doesn't return me to my # prompt. I have to press Ctrl+C to get back. code...
I know I do have one issue with this computer, I have 2 blown caps on my motherboard. This was a dual boot system, but after a virus with winblows, I decided to switch it to strictly linux. (roommates... *grumble*) I think I was running fc10 before I wiped the hd & installed fc12. Fc12 does seem to be running slower, and I still haven't got my sound card working properly... but that issue is for another topic...
-YungBlood Reborn
View 2 Replies
View Related
Jun 27, 2011
I am trying to rebuild packet with mock
Code:
mock rebuild -r fedora-15-i386 rpmbuild/SRPMS/deadbeef-0.5.1-1.fc15.src.rpm
and getting following error in /var/lib/mock/fedora-15-x86_64/result/build.log:
checking for intltool >= 0.40.0... ./configure: line 22040: intltool-update: command not found
configure: error: Your intltool is too old. You need intltool 0.40.0 or later.
code....
View 2 Replies
View Related
Aug 23, 2010
I m using Redhat Linux 5......I am trying to install Nero 4 DVD Writer s/w...It is an exe file ...
I have given permission like this:
Then i execute the file like this:
Its showing error like this:
View 9 Replies
View Related
Apr 15, 2011
Defining tcsh aliases through a .aliases file has worked perfectly for me for years and years using cygwin and older versions of mandriva. I am encountering very annoying and mysterious problems when attempting to do the same thing with a .aliases file in a fedora 64-bit VM. Strangely, if I define aliases in the file, they won't work, but if I do so on the command line, then they will.
Here's a simple example: Suppose I define an alias for "ls" in the file:
alias ls '/bin/ls'
Then source the file. This happens:
me: ls : Command not found.
me: alias ls
/bin/ls
me: /bin/ls
file1 file2 file3 etc.
me: unalias ls
me: ls
file1 file2 file3 etc.
me: alias ls '/bin/ls'
me: ls
file1 file2 file3 etc.
A second example: if I place either of these lines in my .aliases file:
alias d '/bin/ls -alF !:1'
alias d '/bin/ls -alF !*'and source the alias file, this happens:/ me: d
Bad ! arg selector. However, if I define the alias on the command line:
/ me: alias d '/bin/ls -alF !*'then the alias behaves correctly:/ me: dtotal 376
drwxr-xr-x. 10 r r 4096 Apr 14 16:05 ./
drwxrwxr-x. 6 r r 4096 Feb 21 16:15 ../
drwxr-xr-x. 3 r r 4096 Apr 14 16:05 bin.v2/
-rwxr-xr-x. 1 r r 193872 Apr 14 15:35 bjam*
-rw-r--r--. 1 r r 52804 Apr 14 17:20 bjam.my.log
drwxr-xr-x. 77 r r 4096 Nov 17 09:49 boost/
-rw-r--r--. 1 r r 989 Nov 17 04:51 boost.css
View 2 Replies
View Related
Jan 18, 2010
I have run into some serious problems trying to start up RHEL AS4. I am trying to install Oracle on this box which by the way is running as a guest OS through VirtualBox. I was running with it fine yesterday. I was doing the prerequisites of updating the /etc/sysctl.conf file with additional kernel parameters. Prior to that I added another scsi virtual disk and extended a PV and left it at that for the night. I am since come back today and trying booting and am getting the following errors:
Volume group "VolGroup00" not found;
Couldn't find all physical volumes for volume group VolGroup00;
Couldn't find device with UUID "Some UUID of the device";
ERROR: /bin/lvm exited abnormally! (pid 318);
mount: error 6 mounting ext3;
mount: error 2 mounting none;
switchroot: mount failed: 22
umount /initrd/dev failed: Z
kernel panic - not syncing: Attempted to kill init!
I have tried running in rescue mode and it can find volume group VolGroup00. I also have installed Storage Foundation which includes veritas volume manager and other various veritas components. Does anyone have a clue what I am supposed to do here to get RHEL up and running again? I am running kernel version 2.6.9-42.EL if that helps as well.
View 3 Replies
View Related
Nov 17, 2010
I've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a
Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux
[root@hostname-suppressed httpd]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[code]....
View 3 Replies
View Related
Jan 15, 2009
I'm running Fedora 10 [KDE] on an Acer laptop and am having problems configuring "hot keys" for it. First thing that needs to be mentioned is that the hotkeys used to work when I was running it on Gnome without me having to do anything. I assumed that this will be the case with KDE too. In any case, I think driver installation is supposed to be quite straight forward. There are two packages: acer_acpi and acerhk and different installation instructions for each one of them. The problem I am having is when I run the makefile script for either one of these, I get the following output in the terminal:
Quote:
Makefile: line 5: KERNELSRC?=/lib/modules/2.6.27.9-159.fc10.x86_64/build: No such file or directory
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: KERNELSRC: command not found
Makefile: line 6: shell: command not found
Makefile: line 6: shell: command not found
Makefile: line 8: KERNELVERSION: command not found
[Code].....
I think build-essential and some other packages are normally needed, but since you can't get them for Fedora (?), I groupinstalled "Development Tools" and some other group.
View 4 Replies
View Related
Mar 27, 2009
In trying to use the instructions here [URL] I get Quote: -bash: wget: command not found
View 2 Replies
View Related
Mar 3, 2010
I've been asked by my boss to install RHEL 5.4 onto a HP Proliant DL380 G3 which we have here. Now I'm a total linux newbie but can figure my way around most things but this has got me stumped.
I have downloaded the RHEL 5.4 i386 DVD iso and burnt it OK. But when I boot from the CD in the server it doesn't recongise it. I put the DVD into any other server/PC and it boots fine. The server also boots fine from other CDs'DVDs?
Anyway, I thought I would try the boot.iso instead so I burnt this and the DL380 boots fine. I try the default install option, select country/keyboard layout/ select local CDROM as the install type and this is the problem now.
It ejects the boot CD so I put in the RHEL 5.4 DVD and it keeps saying:- the red hat enterprise linux server cd was not found in any of your cdrom drives I have reburnt the DVD and same problem. I have also tried creating a VM with the DVD and this boots and installs fine in VMWare so I know the DVD is good.
View 7 Replies
View Related
Jan 4, 2011
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "
View 5 Replies
View Related
Sep 13, 2010
I am new to Linux and I am trying to convert image files to mpeg video I tried using this command images2mpg -o Vorticity.mpeg -i Vorticity-Magnitude0%d.jpeg I get an error as below bash: images2mpg: command not found
View 2 Replies
View Related
Mar 26, 2011
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
View 5 Replies
View Related
Apr 30, 2011
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
View 1 Replies
View Related
Jun 20, 2011
I installed Tomcat (apt-get install tomcat6 tomcat6-admin tomcat6-common tomcat6-user tomcat6-docs tomcat6-examples) and it runs without problems.
I installed MySQL (apt-get install mysql-server) and it seems to run without problems too.
I changed the default JRE (update-java-alternatives -s java-6-sun).
The weird thing is - if I put the connector-jar into my web application (WEB-INF/lib), the connection works. If I put the connector-jar into usr/share/java, it does not work. If I write the jar location into the CLASSPATH and try "java com.mysql.jdbc.Driver", I get a NoSuchMethodError:Main, which means, that the jar is found?!
The datasource in the tomcat context.xml is:
<Resource name="jdbc/myresource" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="username" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/myschema" />
How can I make the database connection work without putting the jar into the WEB-INF/lib folder of the web application?
View 2 Replies
View Related
May 6, 2010
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies
View Related
