I am trying to run a java .class file by double-clicking it. So far my attempts at running it have been successful, but I don't' know how to keep the display open to see what the output is.
View 6 Repliesi have just installed a redhat linux entprise 5 on my machine. I am trying to install a software and when i run the #install.ksf , my installation gets aborted and my install.log file shows this,
Error: Can't open display !
Environment variable 'DISPLAY' must be defined.
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies View RelatedI have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
I'm trying to install Fedora10 on my new desktop. It has Windows 7 beta on it and Vista. It starts up fine and I select install. For some reason my wired usb keyboard will not respond unless I press the caps lock button while it loads the begging. (I don't know if another button will work, ive only used the caps button since i can see the light come on) once it loads i skip the disk check and anaconda runs, i get the warning (mini-wm:1462): Gtk-WARNING **: cannot open display: :1 .
View 1 Replies View RelatedI wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:
Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault
Ever since upgrading to Fedora 14, my system has been almost unusable. I can only have a few windows of anything open before I start getting messages about:
Maximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedMaximum number of clients reachedxwininfo: unable to open display ':0.0'
I am unable to open any new windows then and lots of programs crash.
When things are still running correctly.
A few minutes later:
1. Does Fedora 12 support ICU 4.4 Development Milestone 3 (ICU 4.3.3) with Unicode 5.2 full integration.(M3) ?
Microsoft's Uniscribe (usp10.dll) actually does not, neither in Windows XP nor in Windows 7. Will say is it possible to display complex scriptures like Devanagari, Avestan, Arabic etc. in Open Office Writer 3.1.1 via Fedora 12?
2. Is there any feature in Fedora 12 to build one's own Keyboard Layouts (like Microsoft's, Keyboard Layout Creator which isn't able to create Keyboard Layouts using Unicode Ranges bigger than U+ffff)?
Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great
The only problem i have is the remote desktop
I have set the password in preferences/remote desktop run command vncpasswd and set password
In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]
Starting VNC server: 1:user1 [FAILED]
My vncservers file looks like this
I have tried restarting service using root login and user1
I installed Open Office 4 on Debian 8 but when I run the program I get this error message.
root@localhost:/home/paul# openoffice4
No protocol specified
No protocol specified
/opt/openoffice4/program/soffice.bin X11 error: Can't open display:
Set DISPLAY environment variable, use -display option
or check permissions of your X-Server
(See "man X" resp. "man xhost" for details)
Open Office works fine when I run the command "startx" in the Konsole but so far I haven't been able to configure it.
We have a digital signage appliance built on SUSE 11.3 with a LAMP server that uses the flashplayer application to play a .swf file from localhost. It is a AOpen GP7A mini pc that has the nVidia drivers loaded. We have lots of customers that have been running the exact same system for over 6 months (we image the drive for each sale).
For some reason, my last customer is seeing the following problem shown below, and this linux configuration is way over my head. Everything else is working (local LAMP server is working, communicating with our production servers to get information works, etc). I have verified that it is screen 0 that is running (at least it shows with Ctrl-Alt-F7). I thought that it may have occurred because of updating the software with zypper up. I had the customer rebuild from the image being careful not to upgrade the software. The result was the same. The pc is a newer version compared to my bench pc, but there are multiple other customers running that same version just fine. So I am not sure if it is
The command is issued by a php script that is run in a root cron job. As I said, it works great on all other customer pc's including my bench system. I also tried to execute the command on a ssh terminal as the root user with the same result. I also upgraded my bench pc and it still worked properly.
The command being executed is sudo env DISPLAY=:0 XAUTHORITY=/home/svision/.Xauthority flashplayer http://localhost/flash/sign.swf &
the result (when run in terminal) is: No protocol specified (flashplayer:15077): Gtk-WARNING **: cannot open display: :0
i am having problem with displaying my text. my text file is displayed in such a way and is called test.......
Code:
Sam Worthington ... Jake SullyasZoe Saldana ... NeytiriasSigourney Weaver ... Dr. Grace AugustineasStephen Lang ... Colonel Miles QuaritchasJoel Moore ... Norm Spellman (as Joel David Moore)asGiovanni Ribisi ... Parker SelfridgeasMichelle Rodriguez ... Trudy ChaconasLaz Alonso ... Tsu'teyasWes Studi ... EytukanasCCH Pounder ... MoatasDileep Rao ... Dr. Max PatelasMatt Gerald ... Corporal Lyle WainfleetasSean Anthony Moran ... Private FikeasJason Whyte ... Cryo Vault Med TechasScott Lawrence ... Venture Star Crew Chiefmore
What i am trying to do is for the program to read "as" and then from there start a new line... thus the expected output is...
Code:
Sam Worthington ... Jake Sully
Zoe Saldana ... Neytiri
Sigourney Weaver ... Dr. Grace Augustine
[code]....
I keep getting the error saying ...
Code:
editmain.cpp.98:error: initializer fails to determine size of 'str'
what does this mean, and how can i be able to format my file in the way i want?
I have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...
export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"
I have two computers both running Ubuntu 10.04. I use my laptop to ssh to the other computer. If I start for instance firefox via ssh from my laptop to have the browser showing up on the screen attached to the computer I ssh to? The computer i ssh to is better in handling graphics so I want to connect it to the TV and use my laptop as remote-control.
View 9 Replies View RelatedI am trying to use awk command in perl. Below is my awk comamnd which works alone.
awk '{Easttot=Easttot+$1} END {print Easttot}' MessagesProcessedEAST2Cnts.dat
I would like to use this awk's output in shell script. I am using system command like below to get the out put. But it is not working.
$Output = system("awk '{Easttot=Easttot+$1} END {print Easttot}' MessagesProcessedEAST2Cnts.dat'");
I am using a 64-bit Slackware 13.1 distro (I chose 64 by mistake, to be honest, as I know there's less trouble with a 32-bit distro) and I have some problems with my consoles (in text mode). After changing the runlevel in ininittab to graphic mode (4), I can't enter any of my consoles. Actually, only ctrl+alt F1 shows some output, regarding the graphic mode (I'm currently using KDE4, the default for slackware 13.1) and F6 is the only normal consoles I have access to. However, if I log out and log in (with another user, maybe) there's no output anywhere (not on F1, neither on F6).
View 1 Replies View RelatedI have an sony vaio laptop and the screen is pretty small so i have connect to tv with a HDMI cable but opensuse doesnt show on the tv. How do i output either the same screen or an extended desktop ?
View 5 Replies View RelatedI use 'grep -Ri "mypattern" .' to search for all files in the current directory recursively that contain "mypattern". But this command returns every single occurence, so that if a given file has several occurences of the pattern, the screen fills up pretty quick. More than likely, there's a way to restrict the output so that it only displays each file once, no matter how many occurences it contains, but I couldn't find how to do it.
View 2 Replies View RelatedThough I have little experience in the past, i just can't get to work what i have in mind.i want to display part of an output stream.
cat sample.xml
<packet or="recv" ljid="d.sample@test.local/" ts="20110204T15:02:55"><message from='j.sample2@test.local/' to='d.sample@test.local' type='chat' xml:lang='en' id='sd61'>
[code]...
I have a Dell Latitude D610, and am running a 2.6.21.7 kernel. If I close the screen on the laptop, the display output switches to the external VGA output. When I open the screen, the display output does NOT switch back. This occurs when running X and when in command line mode. Is there any way to get the output to automatically switch back when I open the screen?
View 2 Replies View RelatedIs it possible to get WGET to only show download progress e.g. download bar, opposed to all of the connection info, as it does look a little ugly on the client side, is this possible to do?
View 2 Replies View RelatedI am beginner in ubuntu. I wish to run the programs that will display a picture which use the ffmpeg, sdl and lame. When I type gcc -o exercise exercise1.c 'sdl-config --cflags --libs' to compile the program it give this such of error :gcc: sdl-config --cflags --libs: No such file or directory. I have installed the gcc packages, SDL, FFMPEG, LAME but still cannot display the output. What should I do with the gcc packages?
View 1 Replies View RelatedI have a file that contains "ls -la" output. I would like to display only the filenames, none of the other information before it such as permissions, ownership, size, and date.Would the cut command be the best way to hit this, or should I use Vim or sed?
View 6 Replies View RelatedMy script is not diaplying output as it contains awk while iterating over the array. My script is as follows:
shortcodes=( "56882" "58585" "58888" "57575" "57677" );
for shortcode in ${shortcodes[@]}
do
echo "`awk -F"|" '/ShortCode=tel:$shortcode/ { arr[substr($2,1,4)]++ } END { for( no in arr) { print no , arr[no] } }'
[code]....
I am running a scan via nmap (nmap -sP) and the out put looks similar to this:
Nmap scan report for x.y.z.com (10.x.x.x)
Nmap scan report for 10.x.x.x
If it can resolve the hostname it does, if not it just spits out the IP. I would like to know the best syntax to use with cut, or awk, so that the only output is either the IP or IP - HOSTNAME.
The display under vlc is strangely colored in blue, or red missing. Anyway the balance isn't correct. I tried every output module but no one is correct. I am running 11.2/kde.
View 9 Replies View RelatedConsider a situation in which you want to display only specific lines of contents from a file or of a command's output. Yes, we have head and tail commands. But, how to view all the lines of a file except the last one or vise versa when we don't know the count of lines in advance?
Consider this output:
Code:
[root@localhost ~]# ps au | grep bash
root 6316 0.0 0.0 4672 1440 tty1 Ss+ Apr22 0:02 -bash
root 20847 0.2 0.0 4672 1432 pts/0 Ss Apr23 0:12 -bash
root 21167 0.0 0.0 3920 660 pts/0 S+ 01:00 0:00 grep bash
Here, I don't want the last line (in italic) to be included in the result since the last line is due to "grep bash" in the devised command "ps au | grep bash". Well, we can rewrite the devised command:
Quote:
"ps au | grep bash | head -n 2"
But, again, here we are specifying the count of lines to be included. But, in the presented problem we don't know any count in advance!
I've just installed xterm, ant trying to run it from my windows machine using ssh. I have X11Forwarding yes on /etc/ssh/sshd_config when I use, MobaXterm, np, I can use xterm after I log ssh -X xxx
but when I use Cygwin, and do ssh -X xxx, and then xterm, I have: xterm XT error : Can't open display: xterm: Display is not set
The video projector I have to use this week projects an image too large for its screen and spills over on every side.
Fixing the physical setup is not possible or at least unlikely for the moment: the only solution is to carefully resize and position windows so that they display in the visible part of the screen - using full-screen mode is out.
Is there a way around this via software, using xrandr for example?
# xrandr doesn't have a padding option...xrandr --output VGA1 --mode 1360x768 --left-of LVDS1 --padding 200
I'm trying for the first time to work with sounds and edit them. I'm trying to use Gnome Wave Cleaner and don't know what to do about the error.
View 1 Replies View Related