Programming :: Customize CPerl Mode - Setup Everything On Cperl-mode?
Mar 3, 2010How do i customize CPerl mode?And how do i setup everything on i cperl-mode?
How do i install perlnow.el
here the link [URL]...
ADVERTISEMENT
General :: Partition Table From Fdisk - Cylinder Mode - Sector Mode - Expert Mode ?
Aug 30, 2010Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
Ubuntu :: Make Grub Boot To Allow Me To Choose Like Safe Mode And Normal Mode And All
Apr 23, 2010how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedUbuntu :: System Won't Boot, Can't Find Safe Mode, Can't Launch Recovery Mode
Nov 18, 2010I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedGeneral :: Emergency Mode Can Mount HDD With FS Error / Not In Rescue Or Single User-mode
Dec 1, 2010My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
Ubuntu Networking :: High Throuput Mode Aka 11n Aka 801.11n Mode On Airlink101 AWLL6075?
Sep 21, 2010I ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
OpenSUSE Install :: 2 Only Boots In Failsafe Mode Not In Normal Mode
Jan 2, 2010I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
Ubuntu Installation :: Install On Usb Key: Live Mode Or Harddisk Mode?
Jan 30, 2010I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
Ubuntu :: Odd Resolution - Monitor After Switched It To TV Mode Then Back To PC Mode
Feb 8, 2011When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
Server :: Change From Graphic Mode To Text Mode In CentOS 5.3?
Sep 14, 2009The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedSlackware :: Set The Journaling Mode Into Data=journal Mode Of Ext3
Jan 12, 2011I was reading about ext3 feature and I have read about its journaling modes. I would like to ask what is the default journaling mode of ext3 fs in slackware(or is it in all distro using ext3)? I'll install slackware when my new pc arrive and the fs I will use will be ext3 and I like it to have data=journal mode for its journaling. I have read in some wiki how to set the journaling mode into data=journal mode.
Code: # tune2fs -O has_journal -o journal_data /dev/sdXY Do i need to issue this command or is this the default mode in ext3 in slackware?
Fedora :: Emacs: Flyspell-mode Not Working In Tex Mode?
Jun 13, 2011I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
Ubuntu :: Recovery Mode To Normal Mode With Graphic?
Dec 7, 2010I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedRed Hat :: Boot In Emergency Mode (not Single User Mode)
Mar 10, 2011I need boot in emergency mode (not single user mode), from docs:
[URL]
in red hat enterprise 5 it's ok, not in red hat 6.
Networking :: Setup Bridge Mode For Windows Server?
Mar 3, 2010 setup linux in bridg mode for my windows server ?
my both linux and windows has 2 network cards each.
basicaly it is vLan cards, each server has 2 network cards. one to main switch and one to local IP.
data will be going like below:
internet ----------------> eth0 --> linux --> eth1 ----------------> Windows.
i have vLans on both servers. And i need cross connection setup. And use linux in bridg mode / cross connection .
actualy i want to use Iptable rules to filter bad packets and forward good packets to windows. i have scripts how to forward packets to windows. but the problem is i dont know how to setup both servers in this topology. and how to make linux as bridge.
All it should be in transparent mode. Not in NAT mode.
Ubuntu Servers :: Setup An OpenVPN Server In Bridged Mode?
Jan 17, 2011I am trying to setup an OpenVPN server in bridged mode (Ubuntu 10.04 Lts). The goal is for the clients to be able to reach all the servers behind Openvpn server's lan. I have followed the official OpenVPN guide for Ubuntu 10.04.
My network setup is:
Private lan: 10.90.90.0-255 255.255.255.0
Gateway: 10.90.90.1
Openvpn server ip: 10.90.90.8
Gateway public ip: 79.xxxxxxxxx
I have forward port 1195 to the Vpn server through my gateway firewall.Besides that no other firewall is running.I can connect and ping the server both from windows and ubuntu clients. The difference is that from windows I can reach the private lan but not from ubuntu clients.
OpenSUSE :: Setup A Custom Home Server Running 11.3 64-bit In Terminal Mode?
Feb 5, 2011I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
General :: Setup Ubuntu To Boot In Terminal Mode With All Service Running
May 5, 2010Im running a virtual linux server on a low-end system, and i wold like to configure the server to boot in terminal window and not to the Gnome log in window, this is because of the low specs on the hardware.
View 5 Replies View RelatedUbuntu :: Setup The Correct Mode For Laptop-video Card-monitor?
Aug 8, 2010setup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.
Red Hat / Fedora :: Setup And Configure A Server Entirely With Text Only Run Mode 3 On A Virtual Machine
Feb 24, 2011I'm trying to setup and configure a server entirely with text only run mode 3 on a virtual machine so I can redo my current live server. I'm now trying to set up the firewall of the system using iptables. I've read up on it and came up with the following:
-clear all rules
#iptables -F
-set default policy rules
#iptables --policy INPUT DROP
#iptables --policy FORWARD DROP
[Code]....
Everything above worked for me but just out of interest I looked at my live server which was configured using a GUI. I ran iptables-save and it was pretty much the same but its port open lines read like this:
#iptables -A INPUT -p tcp -m state --state NEW --dport 80 -j ACCEPT
so finally my question is do I really need the "-m state --state NEW"? Wouldn't having that drop established connections on those ports? I'm just confused as to what exactly the NEW state is doing and would it make a difference if I didn't include it.
General :: VirtualBox - Network Connection To Bridged Mode Setup Fails
Jan 23, 2011I virtualised backtrack on windows 7, and set up the network connection to bridged mode, but my networking still fails.
dhclient eth0, outputs many DHCPDISCOVER but no DHCP offers.
Debian :: "Not Optimum Mode - Recommended Mode 1280 X 1024 60Hz"
Apr 19, 2010I am getting a pop up window saying: "Not optimum mode. Recommended mode 1280 x 1024 60Hz" In my case, this is happening after installing Debian 504 AMD64, the Samsung "SyncMaster 940N" that gives this message or warning was working fine for a few years on another machine under the previous Lenny distro.
The only way to get rid of this unwanted pop-up window (the monitor is working fine) is to press the "AUTO" switch on the monitor, there is no such option in the menu of the monitor to disable anything or change the resolution and it seems to me that, unlike what was suggested as an answer in similar threads, the problem is not with the monitor but with the distro unable to detect the monitor properly. The only mention in the "xorg.conf" file is as follows and running "dpkg reconfigure ..." has no other effect than creating a new exact duplicate of the file.
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
EndSection
Ubuntu Networking :: TP-Link Wifi USB Adapter: Cannot Setup It In Master Mode To Use PC As A Router
Jun 10, 2010I got two issues with my wifi usb adapter:
1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....
SUSE :: Nvidia Drivers And Dual Monitor Setup - Message Undefined Video Mode 31a
Jan 1, 2010I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
Programming :: How To Use Openssl Fips Mode
Aug 18, 2010I want to use FIPS mode under linux. With openssl-0.9.8o, I typed "./config fipscanisterbuild" and then typed "make". The compile successful. Then I did a test about fips, below is my test code (main.cpp):
#include <iostream>
#include <openssl/ssl.h>
#include <openssl/fips.h>
int main(int argc, char *argv[])
{
[Code]....
Programming :: /usr/bin/ld.real: Unrecognised Emulation Mode: 64?
Nov 23, 2010I have problems,I get this:
milenko@hp6830s:~/mt2ddi$ make mt2ddi
f77 -o -m64 driver.o solve_mt2d_direct.o boem.o rotz.o gebolr.o d2emod.o pobo.o mte.o d2hmod.o gsres.o mth.o z1idu.o h1iud.o phase.o
[code]....
Programming :: Detect If A File Is Used In Write Mode?
Apr 14, 2011I have to read files from a linux server. When I copy a file I receivce just a portion of the file I expected if the process generationg ths file is still writing it.
I read the file from a java apllication using SSH/SFTP. How can I detect if the file is still used by the writing process ?
Programming :: Use Buffer Of User Mode In Kernel?
Feb 5, 2009I add new syscall, and it need copy big data into the buffer specified in user mode. How can i do it? use copy_to_user? or can i use memcpy directly? If i use copy_to_use, is it low efficient?v
View 2 Replies View RelatedProgramming :: Using Parallel Port Mode And I/O Pins?
Aug 8, 2010I have a little hardware project and I would like to use the parallel port. I basically want to display status code on top of other custom peripheral on an headless server. I only use output as the display (7 segment) is not part of the device itself. The problem is, the parallel port only have 8 standard I/O pins. I have read somewhere that there is a way to change the mode of the port to enable more data pins using a specification not backward compatible with the "classic" mode (so not enabled by default). I didn't find any other information about this. As I would like to have all 17 non-ground pin to avoid using more circuitry than necessary, how to turn this mode on?
View 3 Replies View RelatedProgramming :: Protected Mode / Segmentation And Paging
Apr 13, 2010I was wondering what exactly is protected mode, segmentation and paging? Do you know of any good explanations?
View 14 Replies View Related