i can not figure out why my program does not terminate if i type n when i read loop unless it is the last if statement in my program ?
while [ "$loop" = y ] ; do
echo "what does baket mean: " ; read word
if [ "$word" = why ]
[code]....
When I boot into Ubuntu, it goes to the log in screen. I can type in my password and then the screen flashes black and then the log-in screen comes back. If I boot into recovery mode, I can log in via terminal, but if I type startx it just brings up a black screen and a mouse cursor and that's it. Did GNOME get messed up? How would I fix it? I have an Ubuntu LiveCD that I can use, so if I have to install any packages or something, would I be able to download them in the livecd and just install them on my broken installation instead of having to figure out connecting to wifi in a terminal?
View 9 Replies View RelatedI need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
Here is my code
Code:
I just cant seem to understand loops. i havent put the loop in yet but what i would like is the user only to have 3 tries at guessing number then exit if wrong or it says "correct if right" tbh i dont even know if the above code is correct. i have tried several ways and position of the loops but each time is comes out wrong
I have a directory file capturing script, the variable is fine with in the loop but gone after the loop is done:
Code:
DIR="/usb/sdb1/media/music/"
i=1
[code]...
I am about to move my scripts to the next generation level, so I need some help I am stuck in varying my variable names in a loop. For example:
for user in ben dorothy mike pat
do
[ -r /home/$user ] && let "$user"check=1 || let "$user"check=0
[code]...
I am trying to do some shell programs. I tried some sites regarding the while loop, they give the structure as:
Code:
while [ n1 -lt 500 ]
do
echo $((n1+100))
done
But the below code also worked for me:
Code:
while ((n1 > 500))
do
echo $((n1+100))
done
By using (( )) I could use while, for. But the documentations didnt follow this way. I mainly use this for datastructure programming.
In the code segment below is a for loop I am having some considerable difficulty with. It just keeps iterating endlessly and totally ignores the 70 times limit specified. I can't ever remember having this problem before and am absolutely Clueless.
Code:
for ( x = 0; x < 70; x++ )
{
fputs ("CSN00", target);
fprintf (target, "%d", userid);
[Code].....
I've got a 'nested' for loop which has a grep in it, if the grep fails there's no output - however the error code is still $0 and the second for loop is still entered, there's also a grep in the second for loop.I guess ultimately what i need to know is whether there's a way of making grep generate an error code. when no results are found?
View 14 Replies View RelatedI want to loop through the records in the below file (homedir.temp)
/home/user1
/home/user2
/home/user3
I want to do the following activities with each record1. du -s - to get the total usage for that directory (my variable name is SIZE)2. divide SIZE by du -c for /home to get the percentage of usage. (my variable name is PER)3. write the directory, SIZE, PER to a filePROBLEMI am using the below for loop: for record in homedir.tempthe mentioned activitiesdonehe above is not looping through the records. It does the first record perfectly and exits the loop.
ITT and am just lurning about scripting and need to read a file and output the file to the screen. We need to do this with a while loop.
View 5 Replies View RelatedWhen I deal with an array in a function I con not access to the content of array in a for loop, but out of a for loop I can access to them! for example
[code]...
In a function when I send as parameter, in a for loop it prints the content of array and out of a for loop it prints the address of arr[i]
I'm writing a mass snmp toner check which polls any toners available to be snmp polled, however when using a loop statement I get the results on different lines; which sounds good, however the tool I use to check with (nagios) ignores the new lines.
Is there any way I can get the output on one line? Also, I need to raise a fault if any of the toners are below a specific level (with nagios you raise faults with the exit code) - any way I can do this without exiting the loop. Code below with bits and bobs commented out.
Code:
check_ink_levels ()
{
for ID in $INKS
do
[Code].....
#!/usr/bin/perl -w
use strict;
my @files = `ls -1`;
[code]...
I have a 50 file name NSSAVE0001.vtk to NSSAVE0050.vtk.Do I have to manually type individually command to open each file or can I have a loop to open file?
View 3 Replies View Relatedso far I have this
list = open('list.txt')
for x in list:
list.read(x)
I need to pass a large number of arguments to a function which takes variable number of arguments, such as gtk_list_store_new. But it doesn't look nice if i write something like gtk_list_store_new(NUM,TYPE_A,TYPE_B,TYPE_C,...,TYPE_OMEGA); because of large number of arguments. And, it will be a trouble to change number of columns because of need to manually change arguments to large number of such functions. So, how can i pass all the arguments to a function using a loop? Something like
Code:
for(i=0;i<NUM;i++)
{
push_arg(args[i]);
}
call_function(func);
?
Of course, i could just use asm code for this, but is there a portable way of doing so?
P.S. i mean C language.
I have images in jpg format
Code:
CIMG0100.jpg
...
...
CIMG0131.jpg
I used imagemagick to convert the files to gif with the following command
Code:
for i in {100..131}; do convert CIMG0$i.jpg CIMG0$i.gif; done # works
This worked like expected, but when afterwards I wanted to scale the images
Code:
for i in {100..131}; do convert -scale 25% CIMG00$i.gif CIMG00$i_scaled.gif; done # works not it seems the system is working for about half a minute, but I get no output. The single command
Code:
convert -scale 25% CIMG100.gif CIMG100_scaled.gif # works
works as expected and gives me a scaled image. What does the convert command do in the second case? is the for-loop wrong?
I'm learning c but then when i tried looping as i follow a tutorial, the numbers are wierd that it seems not right..
This is the example.
Quote:
When i run it, it outputs this.
Quote:
why?
I hade created a file with following text entries.
content of fileitems.txt
kdeaccessibility-4.4.92
kdeadmin-4.4.92
kdeartwork-4.4.92
kdebase-4.4.92
How do I read the file one line at a time and so its ready to do something with that line.
hint me why and how to execute the below for loop, the way i am trying to?
[bkcreddy17@local:~]$ cat -n test
1 date
2 ls -l
[code]...
my issue is that the when i put in the correct input its going into the loop like i put in incorrect input and wont break out of the loop even with the correct input entered
Code:
import java.util.*;
import javax.swing.*;
[code]...
I've got a loop which is able to echo out how complete a process is after each loop (e.g says 25% if the loop has 4 elements and has run once through). Is there any way I can print characters, perhaps a progress bar? I was thinking of using the percentage as a count or something and using.
Code:
I got told off for including code from work here.
The script that Iam trying to write is running a for loop and reading line by line from a text file. inside this for loop i would like to execute update SQL statement .
a pesudo code is
Quote:
`$ISQL -U $username -P $Password -D $Dbname -I $INTERFACE <<QRY
for id in $idlist #idlist iam reading from a file
[code]...
I have a file like below:
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU1723,3423; #this line is ignored to short
[Code]...
What I'm trying to do is while true, cut each line from file that begins with PU and thats longer than 12 characters and write to a increasing numbered file for each line. Stating with object1 etc.
I have a fallowing ASCII text file:
Code:
Fa0/2 - server1 / testing
Fa0/4 - server2 / production
[code]....
I know of 4 different ways to use a for loop:
1. for I in {1..10}; do echo $I; done|
2. for I in 1 2 3 4 5 6 7 8 9 10; do echo $I; done|
3. for I in $(seq 1 10); do echo $I; done|
4. for ((I=1; I <= 10 ; I++)); do echo $I; done
I have a script which uses the 1st form of for loop. I'm trying to modify it to use a variable instead of a static hard-coded value in the section that controls the looping.of the for loop.
I've tried all different ways of quoting and escaping the variable, and the problem is that the quoting chars and escape char are being translated and passed into the loop along with the value stored in the variable.
For example, to change the start value of 1 to whatever value I want passed in through a variable:
Change:
I have tried: {{$a}..10} and {`$a`..10}, to have the variable evaluated first.
I have tried using the eval() function.
I have tried single and double quotes and the backslash escape character.
Nothing I've tried works. It's probably a syntax error.
I have a mytext file with month and year as two separate fields. likemytext fil
08 2010
09 2010
10 2010
........
........
........
I want to read the values of each field i.e., month and year into an awk script.
I am downloading online videos with a bash script this is the code of script test.sh:
Code: Select all#!/bin/bash
while read line
do
"/usr/bin/wget" $line
sed -i "/$line/d" urls
done <urls
The while loop read the videos url from the urls file and parse them to the wget for dwonlaod, i write the wget for easy of exmple in this code otherwise i use another script to downlaod the embed videos , the code
Code: Select allsed -i "/$line/d" urls delete the url of videos from the urls file when it is download is complete.
The problem is http address contain the foreward slashes "/" and sed cannot delete them and get error, this is the urls file:
Code: Select allhttp://download.wavetlan.com/SVV/Media/HTTP/MP4/ConvertedFiles/Media-Convert/Unsupported/test7.mp4
http://download.wavetlan.com/SVV/Media/HTTP/H264/Talkinghead_Media/H264_test3_Talkingheadclipped_mp4_480x360.mp4
http://download.wavetlan.com/SVV/Media/HTTP/H264/Talkinghead_Media/H264_test4_Talkingheadclipped_mp4_480x320.mp4
http://download.wavetlan.com/SVV/Media/HTTP/H264/Other_Media/H264_test8_voiceclip_mp4_480x320.mp4
This is output of the test.sh:
Code: Select all# ./test.sh
http://download.wavetlan.com/SVV/Media/HTTP/MP4/ConvertedFiles/Media-Convert/Unsupported/test7.mp4
sed: -e expression #1, char 8: unknown command: `/'
http://download.wavetlan.com/SVV/Media/HTTP/H264/Talkinghead_Media/H264_test3_Talkingheadclipped_mp4_480x360.mp4
[Code] .....
Never mind, I figured it out myself. Firstly, the old version of BASH I'm using doesn't support
Code:
for i in {1..27}
So I had to use
Code:
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Secondly, it was simply
Code:
#!/bin/bash
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
do
[code]....