I have a script that generates a bunch of output, including the expansions details provided by: set -v -xI am trying to pipe everything that is displayed to a file, in addition to displaying it on the screen. I've managed to get stderr and stdout into the file, but the expansions are only printed to the screen. Here is what I have so far:sudo -u <user> source my_job.sh |tee my_log.txt 2>&1
View 2 Repliesif I'm posting to the wrong forum. Be so kind to tell me where to better ask this question, as I'm really not finding the right words to google for.So, I have a shell application (fdb) which is a Flash debugger. I want to run it using bash script, capture it's output and pass it the commands (it can read from STDIN). The reason I want to do so is that Flash Builder (the IDE for Flash development) is plain stupid when it comes to compilation, and it won't allow me to compile any file in the project... so, I found out that I can make Eclipse to run an external tool. This external tool is my *.sh file whichches the compiler, and then it launches the debugger.The Eclipse console can display the compilation results, or errors. When I run the debugger it can even pass the input from Eclipse console to the debugger, however, the output from the debugger isn't shown.
View 1 Replies View RelatedI would really like to capture the output of scp and my file's progress. Scp updates the transfer rate every 1 second, and I will like to save the transfer rate at every update. So for example, if the file transfer takes 30 seconds, I would like 30 reports of the transfer rate.
The output looks like:
Code:
file.dat 1% 3664KB 938.5KB/s 05:48
Whenever I try a simple redirect like:
Code:
scp file.dat 192.168.1.100:~/ &> output
... it does not save the rate at every update, it only shows the final rate.
If I try using typescript by starting "script" ... it's the same deal.
For example,I have three paragraphs,as following:
I want to output it as following:
I have to save the result of ssh/grep into a file to keep the eol ("/n"):
ssh $SSH_OPTIONS $USER@$NODE "cd $LOG_DIR; grep -h '$pattern' log.*" > $file
So that when I grep on the local file again later, it can be printed out with original log lines. Otherwise, the log lines will be dropped and lines becomes concatenated into a single line, e.g., if I rewrite the script in this way, echoing the $result is not a good idea..
result=`ssh $SSH_OPTIONS $USER@$NODES "cd $LOG_DIR; grep -h '$pattern' log.*"`
is there some workaround that I can save it to a variable rather than file but still keep the eol? That will simplify my script and don't need to do all those I/Os!
I have a bash script that calls a java class method. The method returns a string to the linux console when run independently. how can I assign the value from the java method to a variable in a bash script?running the script: java -cp /opt/my_dir/class.method [parameter]
output: my_string if added in a bash script:
read parameter
java -cp /opt/my_dir/class.method [parameter] | read the_output
echo $the_output
the above doesnt work, I also tried unsuccessfully:
the_output=java -cp /opt/my_dir/class.method [parameter]
the_output=`java -cp /opt/my_dir/class.method [parameter]`
java -cp /opt/my_dir/class.method [parameter] 2>&1
How can i get the output stored into the_output variable?
I have a file like below:
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU1723,3423; #this line is ignored to short
[Code]...
What I'm trying to do is while true, cut each line from file that begins with PU and thats longer than 12 characters and write to a increasing numbered file for each line. Stating with object1 etc.
I am trying to process a column separated data file, with a few bash command. For example, I have
Code:
file1 aaaa yes
file2 aaaa no
file3 bbbb yes
Let say I want to create new file with the output of first column and do something else with the output of 3rd column. Of course there are many ways to process this data file, but I wish to know by using awk, how could I do it. I'm trying:
Code:
awk '{system("touch $1")}' datafile
but the shell command will not able to get the awk '$1' output. How do I get this done ? And for another question, if the data file contains the variable name of a shell variable, how could I make use of it during a awk output ? For example I have a datafile1:
Code:
server1 yes
server2 no
And in another server declaration data file, I got this datafile2:
Code:
server1=xxx1
server2=yyy1
And in my awk script, I want to achieve something like (the syntax is definitely wrong, just to demonstrate what I assume it will like):
[code]....
I have got a script with an outer and inner loop. The inner loop issues loads of echo's which need to be redirected to a log file determined by the outer loop. The obvious solution is to redirect every echo to >$LOG and set LOG in the outer loop.
Code:
for f in $FILES ; do
LOG=<logfile>
for l in $LINES ; do
[code]....
it is possible to map stdout to $LOG in the outer loop without having to redirect every subsequent individual command output?
I'm writing a bash script to auto run on boot in Tinycore.
This is a watered down version.
Code:
I need it to either not add the time stamp if the awk finds a duplicate or write over the time with the new time if awk finds a duplicate.
BTW this is all pretty much cut-and-paste scripting so please feel free to comment if you know a more elegant way.
I am not sure if that Subject really explains it, basically I have a script that executes a CLI java-applet that requires a passphrase from the user. I can easily execute this by issuing the -p argument followed by the passphrase however that shows up on possible logs or at least on the results of the ' ps ' command. If you do not supply this -p argument it provides a new line with the echo " Enter Passphrase: " and asks for input.
how can I provide a result/input for the Passphrase request and is it still possible to throw this application in the background with the ' & ' following the command? I have seen a few examples that show a /bin/expect that expects a result and sends a command however I would like to refrain from any extra dependencies. Example of Regular Execution of application:
Code:
$ /usr/local/***/**** -u USERNAME -r Default-Realm -f certificate.der
Password:
I have wrote a 1 line command that parses a file, locates the IP Address in the file and then trims the output the way I want it, and then sorts numerically and by uniqueness and then >> appends to output.txt
I can get all the IP's into 1 file "output.txt", but what I am really looking for is some type of way to create a text file, for each IP it finds labeled xxx.xxx.xxx.xxx.txt and also put that ip address into that file..
xxx.xxx.xxx.xxx = the ip address it finds
I am writing a bash script that utilizes the output of another script (which I will refer to as script#2.) Script#2 is not owned by me, I cannot modify it. All of the output from script#2 is blue, which makes it difficult for me to read.
I would like to have the output of it changed to grey. Is there a way I can do that in my script? A command I can pipe the output to?
Edit: One other question related to this. I put a trap function in my script that works well. Script#2 essentially runs a tail -f. When I ctrl+c to stop it, it stops script#2 and never calls the trap in my script. Is there any way I can work around that?
Is it possible to organize bash script output of which is like on top command i.e. monitoring every let's say 1 sec and old information would cleared?
View 3 Replies View RelatedI have a problem with snmp answers being empty or having spaces.
What I already have:
#get all interface indexes (if you wonder - I'm working for a cable company and different cablemodems have different number and types of interfaces):
The problem is the physical address which is sometimes empty and the description which has spaces. So I'm doing 2 snmpgets which is slower than 1 snmpget (sometimes I have up to 18 interfaces).
I'm trying to explain it a bit simpler.
Interface 5 gives me back the following lines:
Ethernet CPE Interface
Now the first line should go into variable ifadm,
2nd line should go into variable ifoper,
3rd line should go into variable ifspeed,
4th line should go into variable iftype,
5th line (which is empty) should go into variable ifphys and finally
6th line (which has spaces) should go into variable ifdescr
I have a command that outputs n lines of text, and I want to place each line into an array element, but I can't seem to get the syntax correct
So my command is this:
cat $configfile | sed -n '/cluster:'$clustername'/,/cluster/ p' | awk /host/
Which produces many lines depending on the value of $clustername. I'd like to get each line as elements of an array.
I have a set of bash scripts that I'm running that automatically build a set of packages for me and redirect their output into logs. Basically, I have a bunch of lines that are something like this: ${CONFIGURE_DIR}/configure &> ${LOG_DIR}/log or cd ${CONFIGURE_DIR} && make &> ${LOG_DIR}/log, etc.
This is supposed to make the entire process silent. However, sometimes with some packages some output leaks to my console (either stdout or stderr). I'm thinking that maybe the configure scripts/make are executing commands within new shell instances that don't inherit my redirect, or something to that effect.
Another reason for thinking this is that in another part of my script I detect errors when running make by testing with "if [ $? -ne 0 ]", and if the redirect leaks to my console and also the leaked output indicates that the build failed ("make: Error" and so on), then my $? test fails (i.e., it thinks that $? == 0, whereas a failed make should return a non-zero value). It's as if my original script can't "see" the results from child commands executed from later scripts.
I got a program that i run and get an output from it -> ./prog -i file-name
However I want to write a script to capture its output and write it in the output-file.txt.
How I can write the script (the-script) such that the 'file-name' treated a a variable?
how to capture the FTP session output from Net::FTP module to a text file or in a variable ?
View 1 Replies View RelatedI have this file:Code:vid-gd-19940626-peggy.rmI would like to extract the audio and copy to a file to burn on a CD.'pitivi' will load the file and show the audio timeline. But I can not find a save or copy button.'vlc' will play the file but I can not find how to seperate/save the audio.I found a 'ffmpeg' that is suppose to read whatever is being sent to your speakers.Code:ffmpeg -f oss -i /dev/dsp -f video4linux2 out.wavThis produce a file that 'mplayer', 'vlc', 'audacity' will load but it is empty of useful data. Black screen only.This is the second week I have worked on this. Either I'm googling for the wrong words or what I'm reading, I don't understand.
View 4 Replies View RelatedIn synaptic package manager when I expand "Details" tab (at the time when some software is installed or removed), I can see a terminal. I want to capture the output of terminal into a file. I tried to highlight and right click. But there is no context menu(copy, cut)
View 4 Replies View RelatedI got a program that i run and get an output from it -> ./prog -i file-name
However I want to write a script to capture its output and write it in the output-file.txt.
How I can write the script (the-script) such that the 'file-name' treated a a variable?
I'm trying to record my desktop and tested some solutions. While I was impressed how small .mng files could be, it is a disadvantage that I can't capture audio with it and many users won't be able to open these (browser / Windows). I have been very impressed by the xvidcap instruction videos: 4:30 in only 9MB, which makes 180MB for 90 minutes. This would be suitable. With Camtasia my professor even records 90min in 100MB. The problem is that xvidcap hasn't been updated since 2006 and seems to be dead. RecordMyDesktop needs 6MB for 1 minute or 540MB for 90 minutes, which is too much. Could anybody give me some hints on how to capture very small video files, which are still clear enough to read text in a format most users can open? It would also be cool to be able to show specific PDF or HTML pages synchronised to the video.
View 3 Replies View RelatedI have 3 old video capture cards which I would like to use for CCTV. Each card supports 1 camera. So I would like to have 3 cameras setup in the end and monitor them with zoneminder. When each card is plugged in on it's own, it works fine. Video comes through clearly with xawtv and zoneminder. However as soon as I plug in a 2nd card (with or without a camera connected) the output in xawtv and zoneminder goes haywire. It looks like the 2nd card takes over the first card, resulting in majority of the picture coming from the 2nd card, and some (if any) from the 1st card. When viewing either of the two cards /dev/video0 or /dev/video1 in xawtv the output is identical. I've tried this on a fresh 10.04 Ubuntu install, and on an older MythTV debian computer, the same results. Here are lspci -vv outputs with 2 combinations of cards (same fuzzy output):
[URL]
My thoughts are because the capture cards are cheap (similar to winmodems), the problem may be in the software kernel modules not allowing room for other similar capture cards to run at the same time. Can anyone suggest me in the right direction? Do I need to setup some sort of memory allocation for each card manually? Something in the BIOS? An extra option when the card modules are loaded?
I need a bash script that auto captures the screen (every 30 sec) and then realize an archive with those screenshots. The script will allow me to quering by user name and date and time framing and if exists a capture archive, it will display a slideshow that presents the captures of specified time.
View 2 Replies View RelatedI am trying to grep multiple numbers from file, grep does have the -f option for that.
Code: grep -f <`seq 500 520` /etc/passwd I know this could be done with
Code: for i in `seq 500 520`; do grep "$i" /etc/passwd; done But my question is fare more behind this example. It is possible to redirect one command output which will be treat as a content of file for another command ?
I wonder if there is a way to caputure all X keyboard events, blocking them from going to the window with keyboard focus?
View 4 Replies View RelatedI would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View Relatedsimple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
What is the best analogue capture program please to capture Austar.
View 1 Replies View Related