I have a file in which contains one line with a lot floating points.In the very first place and some times in the downstream, there are a few integers, surrounded by blank spaces.1 1.02-4 1.03-5 544 1.04-1 65 2.98-1 5.78-10 3.45-2 etc etc.I aim to split the file in more files each of them containing an integer and the following floatings until the next integer.
View 1 Replies
I have a single file that contain multi-text something likes this:
Quote:
No. Time Source Destination Protocol Info
185 27712.068199 192.168.18.23 192.168.18.191 SMTP S: 250 2.1.5 Ok
No. Time Source Destination Protocol Info
186 27715.068293 192.168.0.50 192.168.5.2 TCP suncacao-jmxmp > 44693 [ACK] Seq=1 Ack=1 Win=64807 Len=1380
[Code].....
If there's another way to improve a script that I have created, since I'm not an expert! It works, and it made what I wanted, but it took a while to do it... maybe it can be improved. Here's the background. I have one file, with 244000 lines, let's call it X. I needed to split it in 1000 files, each one of 244 lines. I also needed the files to have the .arp extension. So here is what I did:
Code:
for i in {1..1000}
do
sed -n '1,244p;244q' X > $i.arp
sed -i '1,244d;' X # in this way I deleted the copied lines each time
done
I have a file (called twitterstatus.tmp) that looks like this:
Code:
<status>
<id>24854489768</id>
<text>Are we gonna ride the sun home?</text>
<id>55266987</id>
[code].....
How could I feed this into an array, with each element containing everything between the <status> </status> tags?
I have a large text file with three columns. I'm trying to write a PERL script that splits the file up based on the value of the 3rd column. So every time the third column reads 0, a new file is created and all the data up until the next 0 is found is written to that new file. This should happen over and over until the initial file has been entirely split up.
ex data:
000
2024
2243
2143
96962871
97972878
000
2034
3034
3352
So with the data above, the file would be split into two files:
data_1.txt would contain
000
2024
2243
2143
96962871
97972878
and data_2.txt would contain
230
2034
3034
3352
whether it is possible to split open a file and edit only one of the open windows.
View 2 Replies View RelatedIf I have a variable, say xvar, which can take both string and integer value and I want to perform an operation in following 2 conditions:1. Either xvar is null2. xvar equals 2[ -z "$xvar" ] || [ $xvar -eq 2 ] && <some-code>Doesn't seem to work if xvar takes string valuesI know that since I have no restriction on xvar, I can get away with string comparison in second test too, ie[ -z "$xvar" ] || [ "$xvar" = "2" ] && <some-code>
But, 'Sams teach yourself shell script in 24 hrs' says that [ expr1 -eq expr2 ], if either is string, it assumes 0 valueIs it true
I'm trying to write a simple program that lists a menu and then asks you for your decision, and you can answer with a number or the name. However, I don't know how to add the second options (name).
View 14 Replies View RelatedI have a function that take char* I call this function in an array, and I need to pass the following:-i+" binomial" to be like "2 binomial" or whatever value of i value (i is an integer) it is pretty easy to be done in java, but how to concatenate an integer with a string and get char* or string to pass to a new function.If you missed me i just need to get the following :string =integer + string
View 5 Replies View RelatedIm in a unique situation where a box has a 400G file, on FreeBSD, without thesplit' utility available
View 11 Replies View RelatedIn a c program the value of an integer variable is changing rapidly. I have to get the value of that variable at a particular instant from another program. How can i do it without using a file?
When i tried with extern variable as
I execute the both .c file from 2 terminals but got only value 0 printed for both var_a and var_b all the time .
I have a java compiler and Im using a double intiger called Experience and when compiled and run the double intiger does not hold intiger values that are mathameticle. Like 1.5 - 1.4 will equal .100000000000000000009 and 5/3 will equal 1.0. and 1.5x 1.4 doesnt equal 2.1. Is there something I am doing wrong with double intigers? Is it the compilers fault? Could it be something thats wrong with my computer and the compilers I am using are not tat fault? Anyways double 1.5 + 1.4 does equal 2.9 so.
View 4 Replies View RelatedI've got a strange bug that I cannot figure out how to solve. Here is the function.
Code:
int getnexttab(char input[], int index, int length)
{
[code]....
I need to convert an integer to a byte array of size 2 and vice versa. The code shown below works well for positive values but not for negative values. Also, using an array of size four makes the conversion works. However, I am limited to an array of size 2.
View 5 Replies View RelatedIt it safe to read a shared integer while another thread is writing to it on a multicore system?
View 3 Replies View RelatedI want to print a single digit integer on to the screen using the int 0x80. I have loaded the number in the ecx(=5, say), size in edx (=4, lenght) and eax (=4) ebx (=1). I've added 48 to the contents of ecx, and then calling int 0x80, I thought should print 5 on the screen.
However it does not print anything. also gives no errors. I checked the contents of the ecx reg (gdb), it has 53.
A snippet showing the this will be great. I've seen snippets using the c library (printf), but I want to see how it is done using int 0x80.
I get this error when I run the program that i created using eclipse.How to fix this?
View 3 Replies View RelatedI'm trying to do a svnsync of this public repo: http://svn.runuo.com/repos/runuo/devel/ so I can access the repo when my machine is offline. I get this error at revision 419 svnsync: File not found: transaction '419-bn', path '/devel/Scripts/Engines/Doom/Lamp Room/LampController.cs'
I am using svnsync, version 1.6.5 (r38866)
Code:
The error is:
Code:
What I want to do is take input of ip4 as a string, convert it to an integer to add 1 to it, then reconvert it back to a string. Its not working.
My full code is:
Code:
How to manage the find command to return true or false if a file was found/or not? I tried to man find but didn't found anything.
View 12 Replies View RelatedI am trying to install wxsqlite3-2.0.2 on my Debian machine. I have installed wxGTK-2.8.11 in the folder: /home/mrj2/wxGTK-2.8.11
When I run the wxsqlite3-2.0.2 configure script, a problem arises due to the fact that wxGTK is expected to be in a specific directory. The wx-config file cannot be found. However, there are copies of these files for each type of build in the folders:
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildDebugGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseGTK2Unicode
/home/mrj2/wxGTK-2.8.11/GCCBuildReleaseMacUnicode
There is not a problem with my wxGTK installation as I use it in DialogBlocks and it works fine.
I have the following working script. It checks the directory for txt files, if files are there, it copies to another directory or gives error. I would like to exclude "file not found" errors and send them to /dev/null. All other errors should go to the email address as usual.
Code:
#!/bin/bash
function err
{
if [[ $? -ne 0 ]]
[Code]....
splitting a string by every nth characters. I'm using Python 2.7.1 because I'm using older libraries, if that matters.
For example, if this is my input:
Quote:
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed ac elit nibh, vitae venenatis ligula. Vestibulum a varius turpis.
Splitting it by every 10th character should produce this list:
Quote:
[ "Lorem ipsu", "m dolor si", "t amet, co", "nsectetur ", "adipiscing", " elit. Sed", " ac elit n", "ibh, vitae", " venenatis", " ligula. V", "estibulum ", "a varius t", "urpis." ]
How do I catch the output of split and redirect it to another directory?for example,if my working directory is 'Documents' and I split a file called text.one into 4 files of 100 lines each (xaa, xab, xac, xad), how would I get those split files to be written into 'Directory/subdirectory' instead of 'Directory'?And is it possible to rename those split files so that the split name is suffixed with the original file's name e.g instead of xaa, xab... can they be written as text.one.xaa, text.one.xab..?I've thought about using '>' to send the output to a new directory but it doesn't work; and I've thought about piping the results to another command but I don't know what that other command should be.
View 2 Replies View RelatedI am trying to split a pattern in perl and so far I cannot get it to work. I have a pattern that looks like this:
76|2455311|2455312|00:00:00|00:00:00|Once|0|Donkey | |
I always need to print out the 8th field. So in this case donkey. Here is what I have so far:
Code:
#!/usr/bin/perl
use strict;
use warnings;
[Code].....
I'm currently teaching myself perl. I'm trying to write a program that unscrambles words by comparing each element in the array. There is an input file where you type the words to be unscrambled and there is a word list file containing approximately 1300 words. After everything has been processed the program is supposed to paste those words to an output file.
Code:
#!/usr/local/bin/perl
#use strict; #always add this in the beginning of code.
#use warnings; #always add this in the beginning of code.
#open(INFILE, '<', 'sample.txt'); # For reading
#open(INFILE, '>', 'sample.txt'); # For writing
#open(INFILE, '>>', 'sample.txt'); # To append .....
I have tried to learn how 64bit asm (nasm in my case) works and found, among the many disparate pieces of info on the net, a few vague inferences that floating point registers can be used for other purposes than what they are intended for, example: "64-bit Linux allows up to fourteen parameters to be transferred in registers (6 integer and 8 floating point)." This would be fantastic for string operations/manipulation (I have never used asm for floating-point operations), can anyone shed a bit of light?
View 8 Replies View RelatedI need to grep a pattern which can be present in one line or could be split in 2 lines.Normal grep wont work in this case. Can anyone please help on this?There are 100's of files in which i need to search for this pattern so time is also a constrain.
View 5 Replies View RelatedI have an array called @logons. How can I step thru the array and split the fields? This is what I have so far, but doesnt work. I got the feeling I the split statement syntax is incorrect.
Code:
print @logons;
foreach my $logons(@logons){
($userid, $ip) = split(',',$logons);
[code]....
Update: Appears the data in @logons has a column header from the mysql query which I used to populate it with. So that code which I was testing does indeed work.
How can i split a string like this,
Code:
This is my first line.
This is my second line.
This is my third line.
into,
Code:
"This is my first line.", "This is my second line.", "This is my third line."
in C++.
i.e. split the code at every new line
