Programming :: Reading A File Of Data In An Array?
Feb 10, 2011
I have two files of data with different numbers of columns and rows. I want to read this two files in two arrays and then compare for example the second column of first data file with the third column of the other text file and if the difference between of two numbers is less than a threshold then the program print the information in the rows which fulfill this condition in the third text file. I have written below program but the problem is that it does not go through all rows of second file.
declare -a a
declare -a b
r=` awk '{n++} END {print n}' second.txt `
echo $r
awk '
{
[Code]....
Actually I have two data files one of them contains 44406 and the other one has 12066 rows and I want to check whether the difference between the components of two specific columns is less than a threshod but I have simplified it here. I had written this code and then I have realized that this code just goes through the number of rows as the same as the first.txt file and ignores the rest. I could not find the problem yet.
I would like to read unix file permissions into a bash array for processing but tbh I have no idea how to do this. Then I will check for each individual access right l, d, x etc.
I'm writing a bash script where I read a text file (containing a column of numbers) and store each line in an array. There seem to be some problems with the whole thing however, but only for some files and not others. Here's what I do:
Code: #!/bin/bash file=time_notOk.txt ### The file with a column of numbers i=0 ### Array counter ### Read the file
I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:
test.txt :1 6 1 3 6 8 10 2 4
I would like to read those numbers using CAT and store them into an array:
numlen=${#num[*]} - (must be like this because it is a part of a larger program)
I have a folder which includes bunch of folders each having data files in them. [ Folder A has F1, F2 F3 ..... F1000 folders in it, and F1, F2, F3 ... each has about 10 different files named FILE 1, FILE2, FILE3 .... in them.
I am interested in File 1 of each Folder, because that contains the data I need in it. More specifically, that File1 s have a line "ANSWER=..." in them, and i need to get that value of the ANSWER from each file. So doing it by hand is so hard, so I need to write a script that will scan all folders and give me a list of values of eache ANSWERs.
I have been saving an XML file wherein I shall be reading data, if and only if the XML is present on Hard Drive. If same is not present, the code shall generate first and next time it shall simply read and not jump into writing part again and again. The issue that I am facing is, I am deleting the file manually going to that location, and checking whether it is reading the data, upon investigation, I found that it is really reading the data although the file is deleted.
I suspected that there may be some cache issue from where it is picking values, hence it fired the command "sync; echo 3 > /proc/sys/vm/drop_caches" But it is still doing the same pattern.
I have got a problem while reading from the serial port. I'm working on iMX-31 board and Eclipse IDE. Whenever I'm trying to read any data through the serial port, it's displaying I/O Possible and the application is being terminated. After reading I'm trying to write this data on a file. Here are the excerpts from the code:
I have two arrays of data, called data1.dat and data2.dat. each contains 60 data. What I want to do is to compare the data in each file and write the counting into bins. It goes like this. First, take the first data in data1.dat file and compare with the 60 data in data2.dat file. If there is any data which is same with the data in data1.dat then it count in bin. The total bins are also 60. Next it goes to the second data in data1.dat and compare with all the 60 data in data2.dat. If there is any data same then it add in second bin. And it repeats to all the data in data1.dat
So I can select the data from the array like so: PHP Code: echo $data[col_name][row_num];
However when I dump the array I dont get the data I am expecting: Code: running select * from users: meta [company_name]meta [company_name] DATA [Array ( [company_name] => Array ( [0] => My company [1] => My details ) ) ]
I have been trying to write a simple snip of bash shell code to import from 1 to 100 records into a Bash array.
I have a CSV file that is structured like: record1,item1,item2,item3,item4 record2,item1,item2,item3,item4 record3,item1,item2,item3,item4 record4,item1,item2,item3,item4
And would like to get this data into corresponding arrays as such: $record1[item1-4] $record2[item1-4] $record3[item1-4] $record4[item1-4]
I have an application where I am sending data via serial port from PC1 (Java App) and reading that data in PC2 (C++ App). The problem that I am facing is that my PC2 (C++ App) is not able to read complete data sent by PC1 i.e. from my PC1 I am sending 190 bytes but PC2 is able to read close to 140 bytes though I am trying to read in a loop.Below is code snippet of my C++ AppOpen the connection to serial port
I have a binary file, which I need to process using my C++ application. Only thing I know is first chunk of the file is long, second chunk is int, third chunk is char etc... The binary file actually contains something like below. (which is represented in hex base).
D7 07 00 00 00 00 00 00 37 18 00 00 DE 07 ............ so on.....
I need to procees the file in the following way.
* I know the first data segment in my file is long. So it takes 4 bytes. * so I need to read the first four bytes. That is D7 07 00 00. * Then I need to reverse this as 00 00 07 D7. * Finally I need to get the decimal value of above hexa decimal line. ( 00 00 07 D7) * i.e. 00 00 07 D7 (in hex) = 7D7 (in hex- after removing leading 0 s) = 2007 (in decimal)
I made a string key-value mapping struct in C, and functions to add and remove entries. I would also like to write a function to read in this file format:
I need to Read a path of a file witch is written in Text file i used this
Code:
FILENAME=$1 while read line do echo $line done < $FILENAME
it worked and showed me the Line witch was written in my file but now my problem is how am gonna use that line as a path i mean for example if am gonna execute a linux command on that file like dpkg -i /path/to/the/file how am gonna export it from The $Line variable and use it after the command.
I am trying to read certain lines within a file and give the output of the certain lines that dont equal my value, I think showing you would be easier. There is multiples of these inside one file...
Code:
LV Name /dev/vg00/lvol1 LV Status available/syncd LV Size (Mbytes) 300lable/syncd
[code]....
I want to read everything in the file, if the status is not available then it should display the name (directly above status). If they are all availbale then do nothing. I think I know how to do it which includes putting the info in string form and placing in hash but it is proving to be out of my skill range.
To save on the writing of WAY to many files with very little in them, I want to put it all in one file and read a specific few lines. There will be six variables to be read at a time. Format is as such:
//Set 1 string name 5 12
[code]....
From name to 5th number is a set. The name will be of different lengths for each set. This will be a big file of probably 40+ sets. My problem lies in reading one and only one set be it set 5 or set 34. It needs to be done in C++.
Alright, so I have been trying to resolve this issue for awhile, but now feel like help is very necessary.I have a 128(by)128(by)128 array in a MAT file, and am using the following MATLAB script to convert it to a DAT file:
I am trying to read a file character wise and trying to write the same character to another file. In this process, I unable to read and write white spaces successfully to the new file. The script reads the white spaces but while writing the white space is lost. The section of the code, is given below. Please advice how can i read and retain the white space while writing to a new file.
Code:
if [ -s f_test.txt ] && [ -f f_test.txt ]; then echo "File Exists !!" while read -n1 char; do
how to program in bash, an i have a problem, i am trying compare values in between 2 values (from another file), so far my solution is to make a nested for loop, but that causes it to compare every value. Here is a visulization of what i want
file.a 2,3,4,5 file.b 3 5
[code]...
i want the values 2, 3, 4, 5 from file.a to be compared inbetween values 3 5, 6 9,1 2, 4 7 from file.b (var1 is the value im comparing, var2 is the less value, var 3 is the greater value)
for i in $var1 do for k in $var2 do
[code]....
my problem with the above code is it compares EVERYINNG, not the values inbetween what i want (which is 3 5, 6 9 etc).
There is the Archive::Zip I think I can use with Perl 5.10 but I don't know how. I don't want to read or write any files, just zip something in memory, with best compression, like
$text = "this is a test"; $zippedtext = &Zip($text); sub Zip {
I wanted to read out the absolute file-path (filename) as sorted in a folder (on Linux). The reading the file-paths is ok but I have problems in sorting.
Code:
selectedDirectory = fl_dir_chooser ("Select Imagedirectory:",NULL,0); //This is just a widget to show the folder. DIR *d; dirent *de;
[code]....
The files -105.dcm, -106.dcm, -107.dcm lie in the folder at the bottom and -36.dcm, -37.dcm- at the top. The program compares 1 and 3 of 105 and 37, 1 is lesser than 3, then prints out first, but does not know that 105 is three digits and 37 is two digits.
I need to read a binary file using my C++ application. That binary file may contain arbitary characters and it also contains 0 at some places. I need to read the file without considering null terminating character. (i.e. considering 0 as a normal byte and not as the end of the string)Can some one suggest me a method to read the buffer while ignoring the null terminated character.
