I'm trying to build a custom setup that requires a flash drive and a CD to both be mounted to root. Applications, boot data, and other static directories are on the CD, while /home, /opt, and /tmp are on the flash drive. Is there a special option I can enter into fstab to allow this? If not, I intend to modify my kernel to allow this, but I'll need to find the sources that control this function.
View 4 Replies
I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies View RelatedJust the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
I thought, that "Removable devices" module in KDE system settings supposed to automount removable devices. But when any removable media inserted, absolutely nothing happens.
View 6 Replies View RelatedI came into this strange behavior related to mounting DVDs and/or CDs in SuSE 11.2 : after inserting a DVD intro the DVD unit, and mounting it through the "device notifier" applet, I find the disk mounted in /media under a folder named after the disk label (as expected) BUT ... the folder is in fact padded with blanks after the name found as label for the disk. For ex.: I have a DVD called DVD_ROCK2 The mounting is made in "/media/DVD_ROCK2 " (the folder created at mounting time in /media has 14 characters (if I counted them correctly) instead of the only 8 from the name of the disk This does affect my application "cdcollect", which crashes when it encounters a mounted disk which contains spaces in it's label.
I tried to adjust cdcollect, by modifying it's dources (trying to "trim" the name readed as disk-label, but with no results; anyway I am not good at C#, and even kinda hate this language, so... I'd prefer a solution coming from Linux's point of view: what changed in the mounting system from Suse 11.1 till now ? what can I do to change this way of mounting the disks ?I cannot state this happens with every single one of my DVDs; the ones wich are mounted this way are generally written in the same PC, in older versions of SuSE (11.0 and 11.1). Unfortunatelly, I had an older written disk (way back on SuSE 9.x) which does not behave this way (it is mounted in a folder with the name created exactly as the label is, without the padded spaces).
An old machine in our office, running Ubuntu 6.06 all of a sudden will not boot up. I get the following info during boot:
Uncompressing Linux... Ok Booting the kernel
mount: Mounting /root/sda1 /root failed: No such device
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
[code]....
I haven't changed anything on the system as far as I'm aware, and I ran some HD diagnostics and everything seems fine. however when I try to mount the drive with the following command:
sudo mount -t ext3 -o rw /dev/hda1 /mnt
I get the following error:
mount: wrong fs type, bad option, bad
superblock on /dev/sda1, missing code
page or helper program, or other error
In some cases useful info is found in
syslog - try dmesg | tail or so
I ran fdisk -l and it says the partition type is Linux. The output after running dmesg | tail :
[12207.483801] init_special_inode: bogus i_mode (101)
[12207.483809] EXT2-fs: corrupt root inode, run e2fsck
[12260.427078] init_special_inode: bogus i_mode (101)
[code]...
Update: After running e2fsck -p /dev/sda1, I get the following info:
/dev/sda1: clean, 142449 / 9584640 files, 5402711 / 19161520 blocks
I want the following behavior in kubuntu 9.04 when I plug a device (USB stick or CD disk):
1. It should be mounted automatically for me. Now it isn't, though it appears in fdisk -l output: Code: Disk /dev/sdd: 8006 MB, 8006926336 bytes
16 heads, 32 sectors/track, 30544 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk identifier: 0x9b12d290
Device Boot Start End Blocks Id System
/dev/sdd1 * 16 30544 7815232 b W95 FAT32 and if I mount it manually, all goes OK
2. If I mount manually my CD disk and then press the eject button on my drive nothing happens until I manually unmount the drive. But I want it to open immediately
All this worked for me in kubuntu 8.10, and broke with the upgrade.
My fstab entries Code: /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdc1 /media/usb vfat noexec,codepage=866,utf8,nosuid,nodev,quiet,uid=1000,gid=1000,umask=077,user 0 0
When I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies View RelatedI have an external USB drive that is NTFS. It mounts fine under my account and my wife's, but only if I fully shut-down the computer between switching. While switching users or logging out then in with a different account it will not mount the drive. I am not sure what to do... but we both access data from the same drive.
View 2 Replies View RelatedI have a broadcom wireless card in my laptop and as far as I know, it acts as an USB device. I also have one USB stick wireless device (TL-WN422G - uses ath9k_htc driver) which I want to use at the same time as the first (Broadcom) device.
The problem is, after I load ath9k_htc - iwconfig does not show the new USB device (the TL-WN422G - wlan1 / ath0 / whatever), but only the old one (wlan0 - Broadcom, checked by MAC).
I tried this USB device (TL-WN422G) on my other computer that has PCI wireless card in it, and they both worked just fine together after I pluged it in... I get wlan0 (Ralink) and wlan1 (TL-WN422G). Is it some kind of a problem for the laptop that both devices are recognized as USB? How do I make wlan1 appear on my laptop?
also, my system is fully up to date 2.6.35 kernel (Arch)
edit: I've already downloaded the needed ar9271.fw from linuxwireless.org and I put it into /lib/firmware - something wrong in that?
dmesg gives me this on laptop:
usb 1-5: new high speed USB device using ehci_hcd and address 9
usb 1-5: ath9k_htc: Firmware - ar9271.fw not found
ath9k_hif_usb: probe of 1-5:1.0 failed with error -22
[Code].....
I've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.
I have 2 devices I'd like to be able to sync to without going into preferences and changing options each time. That is I'd like to just click "device>sync episodes" and have it sync to both devices automatically.
View 1 Replies View RelatedI am using Ubuntu 10.04 LTS - the Lucid Lynx. I am using the laptop to play video files and view it on TV using HDMI output. No problems. Requirement: to play simultaneously a different media file and be able to listen through say headphone / laptop speakers. While a movie audio is only heard on TV, other audio is heard only on laptop speaker.
View 7 Replies View RelatedOn my desktop computer (now running the very impressive Slackware64 13.37 and generic kernel), I've got what Alsa considers 4 different sound devices:
Logitech USB headset
Logitech QuickCam Pro 9000 with built-in microphone
ATI HD48x0 audio (which uses the HDA-Intel driver) on my graphics card
Intel 82801JI audio (also using HDA-Intel driver) on my motherboard
When I run alsaconf, it picks up the ATI audio only (which is fine). Later running alsamixer (or any other mixer) all 4 are visible. The issue is that I really would like the ATI audo to be in position 0. Previous to Slackware 13.37, setting up the device positions in /etc/modprobe.d/sound usually did the trick. However, that is now being ignored and one the USB devices are being put in position 0 regardless of what is in sound.conf. This is driving me nuts as a lot of software simply use the default audio device, which I would like to be my speakers, but is now my USB headset.
All of the googling I've done points towards messing with the /etc/modprobe.d/sound.conf file, but as I said, that is being ignored. Is there a more 13.37 way to have ALSA order the audio devices the way I want?
At work, I have a laptop configured with CentOS 5.5 that we will be using to run latency tests on two different mobile networks. To do so, we have two Novatel USB HSPA+ wireless modems connected, and configured using wvdial. The problem we are having right now is, wvdial is configured using the path to the modem to connect (/dev/ttyUSB0 for Network#1 and ttyUSB5 for Network#2), which only works if we insert the modems in the right order. I've tried alot of udev rules and what not to try and hard code the device names to something like /dev/modem_network1 and /dev/modem_network2, but that doesn't seem to work.
So at this point I'm trying to take a step back and a fresh look at the problem. Can anyone give me any information regarding where I should begin to get this done?
I always keep my headphones as well as my 2.1 speakers connected simultaneously on my PC (Gigabyte motherboard). Both these audio devices work fine simultaneously on my Windows 7, but in Ubuntu, only my headphones work, speakers don't work at all. I tried changing some settings in SOUND PREFERENCES as well as ALSA SOUND MIXER, but not luck so far.
View 1 Replies View RelatedI have Disk /dev/cciss/c0d1: 599.9 GB, unallocated on CentOS release 5.4 .
I need to create about 30-40 LVM's worth 500GB as raw devices for sybase . is there a way to script it or anyone already has it ?
The problem is that each time we need to do fdisk /dev/cciss/c0d1 and enter the partition no to create a new one .. how to overcome that problem and automate it in a script ?
I have an Intel HDA audio card, and would like to record both my soundcard output and my microphone input at the same time. Getting to record my soundcard output (aka "Stereo Mix" or "What-U-Hear") is impossible for my soundcard without using the PulseAudio monitor, so I've set that up. Now I can record either the PulseAudio monitor for my soundcard, or the microphone input, but I don't know how to record both at the same time.
Currently, my .asoundrc looks like this:
Code:
pcm.pulse {
type pulse
}
ctl.pulse {
[code]....
So now I can choose either "pulse" as an input channel in, for example, Audacity or RecordMyDesktop applications (and then set in the PA volume control the actual channel which I want recorded), or choose "pulse_monitor" or "pulse_mic", in order to record either the PA monitor or the microphone, respectively.
I've read through the ALSA plugins reference, as well as the Asym and Dmix pages on ALSA wiki, but I'm still not sure how to put this together. I figured there should be a way either to route the microphone input into the ALSA output, and thus make the PA monitor "hear" what I speak into the microphone, or to make a completely new channel with both ALSA output and microphone input as "slaves", and then use that for recording.
I recently installed a new sound card, and I need to find out how to change the default device. Currently, I'm dual-booting Windows, and I had re-enabled the on-board audio in the PC's bios. After doing that, Debian started detecting that on-board as the default sound device. Is there a way to set my sound card to be used instead? I found out that the 'alsaconf' utility has been phased out. I"m currently running Debian testing, for amd64.
View 4 Replies View RelatedIs it possible to present multiple LUNs from 1 SAN with 1 NFS server? Currently, my NFS server is directly connected to my FC SAN. Do I have to install and configure multipathing for this to work OR is this just not possible to do over one connection?
View 6 Replies View RelatedIs there an easy way to mount multiple disc images? I want to have all five Debian DVDs mounted at once, so if I try to install software from them, I don't have to insert the disc and it just automatically loads from the image.
View 1 Replies View RelatedI *take* photos with both my Android smartphone and a fullblown DLSR. I *manage* photos organize, rename, rotate, etc. -- on my Opensuse box with KDE's Gwenview, and on my phone with Pixie Reef's "Fishbowl" Photo Gallery [URL]... I'm interested in your ideas about ways to keep everything in sync -- without using 3rd-party online services (No Picases, Flickr, Smugmug, etc). What needs to be kept in sync, somehow, includes:
The photos themsleves. Their organization among, and order in, various 'albums' Photo & filesystem metadata -- timestamps, filenames, EXIF data. PhotoApplication-specific data recognizing that at any time a change may be made on either device. rsync is a possibility, but once photos move into different dirs, it'd get messy. What workflow can I use to do this? Do I need a central server in the mix? If not using the 3rd-party services, is OwnCloud my best/only choice assuming that after each (group of)change(s) on each device I manage to sync with it?
Say I have an image of a file system. I made it with dd by copying it off my USB stick. e.g. "sudo dd if=/dev/sdb1 of=./image.ext2" I can mount said image with the command: "sudo mount -t ext2 -o loop ./image.ext2 /mnt/" Now, say instead of copying a partition with dd, I copy a whole drive. e.g. "sudo dd if=/dev/sdb of=./image.img". sdb had 2 partitions on it. How can I mount those separate partitions without copying that image back onto the USB drive?
View 1 Replies View RelatedI have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.
View 6 Replies View RelatedIs it possible to output one playback stream to multiple devices simultaneously with the current PulseAudio / Phonon setup? The PulseAudio mixer only has radio buttons to choose one device per playback stream. I believe the hardware is capable of this, since I remember doing that before we had PulseAudio. How can I duplicate an audio stream?
Here's one application scenario: I am travelling with my family, all crammed in small hotel room. My wife and me want to watch a movie on my laptop without waking up our kids. I just happen to have one analogue headphone available and one wireless USB headset with me. (Of course, the low tech solution is to bring an 3,5mm Y-cable to attach two analogue headsets, but I would really love to use the USB headset together with the analogue one.)
Another similar thing that bugs me is that my laptop's built-in speakers now always seem dead when an analogue headphone is plugged in. This is mostly what one wants, and before PulseAudio, one had to manually switch them off which was generally annoying. However, the downside is for example with notifications.
For example, before PulseAudio, I could configure Skype to always ring over the laptop's built-in speakers, regardless of whether the analogue headphones were plugged in. This is no longer possible, since PulseAudio does not distinguish between built-in speakers and built-in analogue port any more, while old Alsa did. So in my office, where some analogue headphones are plugged into the docking station, I never hear Skype ringing if I don't wear the headphones.
I setup samba file sharing to auto mount in fstab. Everything works great except when a computer has more than on user account.
The folders in mnt are owned by root and ownership changes to the first user account no matter what user logs in. So only the first user can edit files in the mounted share.
Anyone got a clue why this is happening? Seems the mount folders should be changing ownership to the user that is logged in.
I have Linux Mint (LMDE) on another partition and I guess I need to do some 'fixing' so I need to mount the partition. I can't, though, not by just clicking the partition (obviously?). I assume this is because I need root access to mount it.
how I can do this?:
1) CLI - mount via CLI by mounting at some point - for e.g., mine is /dev/sda3 so mount as ?
2) Use an 'editor' or file manager - such as Dolphin - how would I do this?
3) Use a Live CD/DVD - I think this way is unnecessary but it's a way, right?
Anything I missed? I guess gparted could mount it?
Which method would you use?
I think one could ssh into it but I'm not able to do that yet.
I need to exit the xorg.conf file which is recently really messed up.
I installed ubuntu 10.04 from the CD (downloaded from ubuntu website), all worked very well. until today that I decided to run the software updater. It installed all the updates correctly, I restarted ok, but i experienced a mini locks, for example when i was with firefox, firefox had mini hangs for about 15 seconds then run normally. Then all OS got unstable, windows showing no thing, for example when i tried to restart using the button, it didnot do anything. Well i reset my computer and BOOM!, im stuck after Grub showing me this:
mount : mounting /dev on /root/dev failed : No such file or directory
mount : mounting /sys on /root/sys failed : No such file or directory
mount : mounting /proc on /root/proc failed : No such file or directory
[code]....
I'm able to reproduce this. I installed a fresh 10.4 again, then installed propietary drivers (nvidia), restart, all working flawless here, then updating all packages using the update-manager, restart, here not all working well (same sympthoms) so i decided to restart, then BOOM AGAIN.. I did the process 3 times and, the same, so I think something is BROKEN. So im able to reproduce it but don't know what the hell is causing it.
I am trying to give another user the ability to mount any hard disk by using either the Places menu or the Palimpsest disk utility. Currently whenever you try to do either of these, it immediately asks for root password, even though the logged in user has sudo priveliges to mount disks.
I have modified the sudoers file and given them access to STORAGE and other needed commands. The account CAN mount using the mount command in terminal, but I want to allow them GUI use. From my reseach it looks like Fedora is using DeviceKit but I'm not too familiar with how it works. What do I need to allow non-root users to mount disks in the GUI?
I'm having a problem mounting a vfat partition using fstab... If I don't use fstab and mount it manually, everything works fine. But if I add a line to fstab, it will mount, but will have root permission only - so I can't write to it. can mount another partition (ext4) through fstab and everything works fine. Just not sure why there's a problem with the vfat partion. Also, if after mounting it through fstab I try to unmount it, it gives an error saying only root can unmonut it.
View 2 Replies View Related
