I am writing a program and I need to be able to grab data from web pages.The data I am looking for is on wiki pages with basic tables.A simple example would be like grabbing all of the episode data from a TV show of something similar.
View 5 RepliesI've got lines of data in the following format:
space1=number of times error has occured
space2=IP address
space3=Error
I've set this out nicely with printf and made it email me, the problem is - it's not entirely clear what each column/space is and the IP and occurances can sometimes seem confusing. Is there any (easy) way to output this into an ascii like table? There will always be 5 occurances, and the format will always be the same
I am working on an application in Motif and C++, which uses an XRT Table. With the XRT Table being an infrequently used product, it is hard to find good documentation on it, and one area in particular is sorely lacking... a good explanation on how to copy text from the table to the clipboard used by other X11 applications. I've come across an example application that demonstrates how to copy text to the clipboard, but I cannot seem to merge that knowledge with what I'm provided with the XRT Table API. Does anyone have any knowledge in using the XRT Table, and in particular, with copying selected fields within the table to the clipboard?
View 3 Replies View RelatedHow system call internals could be known ? I mean for example if i take the example of write system call of linux kernel, where i can find out the code of write() system call in the kernel source tree ? The problem is write() system call directly write on console.If we want to write the data on some web page then write() system call will not do that ? How to redirect out data from console to application like html/web page?
View 6 Replies View RelatedI have this program:
#! /usr/bin/perl
use DBI ;
use strict ;
[code]....
and I get this error simply running the program from the command line: DBD::mysql::st execute failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1 at ./submit.cgi line 24.
is this the right syntax to use, both, for this line:
my (@param) = $cgi->param("firstname","lastname","type") ;
as well as this one:
$sth=$dbh->prepare ("SELECT firstname,lastname,type FROM dts WHERE firstname LIKE $param[0] AND lastname LIKE $param[1] and type LIKE $param[2]" );
or should there be quotes around the $param[0] or something? (also is it $param[0] or $param(0)?)
I have a problem with arrays in awk. What i want is to take some data from a file (ssh log) and print it to a html table. I have managed to print some stuff (user logged in and how many times they have logged in) What i want more is to take all the ip that each user logged in from and print it in a row next to the username and times (in the code i typed blabbla where i want the ip to be shown. How do you think i should approch that, multidimensional arrys maybe?
Code:
had trouble viewing partition table using fdisk, now realised i just cudnt view the whole table from Rescue terminal, please remove this thread, i can't find how ))
View 1 Replies View RelatedFor some reason I am unable to view my database tables for my Wiki & I can't understand what I am doing wrong or what I'm missing. I know for sure there's table data on my 'wiki' database but for some reason I don't know how to list it.
Code:
psql (8.4.5)
Type "help" for help.
[code]....
When a user logs into my webmail application, it creates entries in a table on MySQL called "identities" which works great however once the user is deleted fro Linux with the "userdel -r" command, the data still sits in MySQL. My question is how I can I remove the table data from old users? It appears as show below:
[code].....
I have tried a few packages but cannot find an easy intuitive interface for editing tables in a mySQL database. I just need to simply edit the table field data, import and export multiple rows, and filter the table data so only the rows are returned based on a string that I search for. The tables I edit have several thousand rows and some up to 30,000. I do not know how to write queries and it seems all these packages require that you know how to write sql queries to do what I need to do. On the mac I used Sequel Pro, which is dead easy to use and is mostly point and click to do all the above. Since my mySQL experience is very limited, I really need something simple like this.
I have tried:
MySQL Workbench
Navicat (lite version)
MySQL Query Browser
how to do what I need to do with the above packages.
I'm having a slight dilemma on reading data from a text file and outputting it into a table then displaying it. Basically I'm writing a shell script that takes information from text files then outputs the data into a table with 4 headings. The extracting of the data is fine, but creating a table i'm having problems with. My code extracts the data outputs the string to another file which works fineThe text file looks like this
mr smith 1 purchase oct 2007
mrs smith 2 purchase nov 2006
i want it to look like this
[code]....
I was putting the cover back on my Antec p180b, and I guess it got stuck and gave it a hard bump (pretty much broke the cover). As a result, one of my hard drives, a Seagate Barracuda ST3750640AS, got messed up or something. All the other hard drives are fine. It's in an LVM with another hard drive, so now I can't boot up into my computer. So I booted into the installation CD:
Code:
# find /dev/sd[a-c][1-3]
/dev/sda1
/dev/sda2
[code]....
This led me to believe the partition was messed up. So I ran cfdisk, and it said something about a missing partition table or something. Additionally, instead of showing the single partition on it, it displays, from my recollection, Pri*Log. To my knowledge, this is the only problem with the hard drive. So now I need to either somehow create or restore the partition table without overwriting the data. Or get a new hard drive, and some how recover the data (LVM, partitions, and all).
I have 8.04 running mdadm raid 1. I selected the wrong drive in gparted and managed to hose my partition tables.
View 7 Replies View RelatedI erased my partition table. Can anyone recommend a good method of reconstructing it? And if this is impossible, can anyone recommend a good method of data recovery? I had an ntfs partition with windows 7 and a larger ext3 partition that ran Debian.
I'm running Test-disk on the SystemRescueCD at the moment (cross your fingers).
I'm having a slight dilemma on reading data from a text file and outputting it into a table then displaying it. Basically I'm writing a shell script that takes information from text files then outputs the data into a table with 4 headings.he extracting of the data is fine, but creating a table i'm having problems with. I think it is possible to do it using the awk function, but so far i'm having a lot of difficulties.
View 14 Replies View RelatedI used to have a 1TB external drive with lots of stuff on it. But after a reported drive failure during a F11 install the partition table seems to have been lost. (I think F11 toasted it)
Disk /dev/sdc: 1000.2 GB, 1000215724032 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
The drive used to have xfs and a partition. Is there any way to rebuild the partition? Or is my 1TB of data gone forever? The drives seem to be fine now... I just want to get it up enough to either pull any data or just to get a file list. Most of the stuff on the drive was from somewhere else.(ie 300GB of NRN data for all of North America.
During a recent request to install fedora 11, I ran into an interesting problem. It seems that between fedora10 and fedora11, the developers switched from fdisk, to parted for creating the initial pre-mke2fs partition table creation.
It looks like the implementation of this is broken, as it's writing the partition table with overlapping cylinder boundaries. While this can sometimes be ignored, it can in certain cases cause significant data corruption.
On an installation I took it through, using the latest installation media, in both manual & automatic partition creation, the layout looked like this:
The last two partitions turn out fine, for some reason. However, those two partitions should not have overlapping cylinders. After my very first installation, the system was completely unbootable, and not even fsck wouldn't rescue it. If this is possible, then that means that a system that's been online for months or even years could simply drop out of functionality simply due to a byte or two of system-critical data falling on that last cylinder. Considering that a lot of the time kernel data ends up on /dev/sda1 (commonly the /boot partition), this is something that should not be ignored.
I want to download some specific information(age of the building, value, square feet, etc.) from a county auditor's website:[url]
For every property in the county and ultimately match it to a .dbf file I already have containing geographic information for each parcel.
The website only displays information for a single address at a time in response to a query form asking for either the parcel ID# or street address. I have a table of all the county's parcel ID#'s and valid addresses-about 350,000 or so of them.
I imagine there must be some way to automatically crawl the website inputting the information from my tables into the form and gathering specific information in some sort of format that could then be matched to corresponding information in my .dbf file.
I used a Kingston 8Gb flash drive as a live usb recently (copied the live iso image over using dd). I am done with the installations and all but seem to have a problem. i cannot format my flash drive. It now shows as a live CD (800 or so mb). Is there a way to fix the partition table back? I guess if i copy a partition table image from some other 8 gb drive that might fix the problem but i dont have any other flash drives. Is there a solution possible or am i stuck with a live usb forever
View 1 Replies View RelatedI've initialize a virtual disk and deleted the partition table didn't notice that i've done that to the wrong one, data still on the physical hard disks but....how I'll get my data back safe without losing it?
View 4 Replies View RelatedI am using read() in c++ to get data from a serial port. However, if no data is available on the serial port the function blocks until dta arrives.Example code:
//------------------------------------------------------------
char m_readBuffer[255] = {0};
char* p_curChar = m_readBuffer;
[code]...
I have some data files that should be distributed with my program. Using dist_pkgdata_DATA in Makefile.am, I get these files installed to /usr/local/data/share/package-name. The problem is that data is read-only, and my program needs to modify it. Playing with dist_sharedstate_DATA, dist_localstate_DATA, dist-data_DATA varibles, I got different installation directories, like /usr/local/com, usr/local/var, but data is always read-only.
How can I distribute modifiable data files with my package? I need some common directory for all users, or maybe local data in a user directory.
Im new to linux Iam pursuing bachelors in computer science engineering.... my final year project is to develop a "html to pdf converter using linux"... i have some basic knowledge of commands used in unix
1) Where can i get the basic idea about the existing converters... their pros and cons...
.... programming...
2) Any kind of material or source where i can get basic idea of programming used for converting html pages that are linked into a single pdf..
I have the following snippet HTML code:
Quote:
<table id="profile">
<tr>...............</tr>
<tr>
<td width="40%">
[Code].....
How can pass values in args[0] and args[1] to Perl/CGI script?
I've a web page where I can search information in my database.Sometimes results of search operation are more of fifty.How can I split results in different web page as it happens for example in any search engine or operation
View 7 Replies View RelatedI have a firewall, this consists of three NIC's:
Code: eth0[192.168.0.2] eth1[192.168.1.2] and eth2[10.10.165.2]
I am trying to ping eth0 from eth2, but I am not able to succesfully get a response from pinging the device, I am using:
Code: ping 192.168.0.2 -I eth2
I have tried to insert routing data into the routing table, but it still doesn't work
I have been working on this since 3 days but wasn't able to achieve what I want
I have a big text that has the following format:
Current max fieldLen for table1 (a):
Fld# Width MaxWidth ERR NAME
---- ------ -------------- ------ ---------
2: 80 38 *** field-name
3: 4 2 field-version
4: 40 7 field-value
[Code]....
I have just run into a baffling error. I have a database set up in MySQL with six tables. My PHP based website performs queries of all kinds on these tables (SELECT, INSERT, UPDATE, DELETE). On my most recently setup table, the "Orders" table, I am able to perform queries from the server, as well as from my PHP MySQL Admin interface, but all activity from my webpage states that the Orders table does not exist. All other tables are running fine. I have tried rewriting the query script, checked for case sensitivity problems, even cut and pasted other working scripts in place, changing the table and field names as needed. No success. What could cause a single table to not show up like this?
View 2 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View Related