General :: Can't Format Kingston 8GB Data Traveller G2 - Fix Partition Table Back?
Oct 25, 2010
I used a Kingston 8Gb flash drive as a live usb recently (copied the live iso image over using dd). I am done with the installations and all but seem to have a problem. i cannot format my flash drive. It now shows as a live CD (800 or so mb). Is there a way to fix the partition table back? I guess if i copy a partition table image from some other 8 gb drive that might fix the problem but i dont have any other flash drives. Is there a solution possible or am i stuck with a live usb forever
I've initialize a virtual disk and deleted the partition table didn't notice that i've done that to the wrong one, data still on the physical hard disks but....how I'll get my data back safe without losing it?
had trouble viewing partition table using fdisk, now realised i just cudnt view the whole table from Rescue terminal, please remove this thread, i can't find how ))
I have an unallocated space at the end of my hdd, which is about 10 gb. I installed Pardus on that space, but then deleted the partition to install something else (I know I did not have to delete it, I could simply install the new thing over it), i dont remember exactly how, but it was from my Debian System, not from a LiveCD.Now, I am unable to use that space. GParted gives an error and says:Warning: the kernel failed to re-read the partition tableon /dev/sda (Device or resource nusy). As a result, it may not reflect all of your changes until after reboot.
I was putting the cover back on my Antec p180b, and I guess it got stuck and gave it a hard bump (pretty much broke the cover). As a result, one of my hard drives, a Seagate Barracuda ST3750640AS, got messed up or something. All the other hard drives are fine. It's in an LVM with another hard drive, so now I can't boot up into my computer. So I booted into the installation CD:
Code:
# find /dev/sd[a-c][1-3] /dev/sda1 /dev/sda2
[code]....
This led me to believe the partition was messed up. So I ran cfdisk, and it said something about a missing partition table or something. Additionally, instead of showing the single partition on it, it displays, from my recollection, Pri*Log. To my knowledge, this is the only problem with the hard drive. So now I need to either somehow create or restore the partition table without overwriting the data. Or get a new hard drive, and some how recover the data (LVM, partitions, and all).
I erased my partition table. Can anyone recommend a good method of reconstructing it? And if this is impossible, can anyone recommend a good method of data recovery? I had an ntfs partition with windows 7 and a larger ext3 partition that ran Debian.
I'm running Test-disk on the SystemRescueCD at the moment (cross your fingers).
I used to have a 1TB external drive with lots of stuff on it. But after a reported drive failure during a F11 install the partition table seems to have been lost. (I think F11 toasted it)
Disk /dev/sdc: 1000.2 GB, 1000215724032 bytes 255 heads, 63 sectors/track, 121602 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
The drive used to have xfs and a partition. Is there any way to rebuild the partition? Or is my 1TB of data gone forever? The drives seem to be fine now... I just want to get it up enough to either pull any data or just to get a file list. Most of the stuff on the drive was from somewhere else.(ie 300GB of NRN data for all of North America.
During a recent request to install fedora 11, I ran into an interesting problem. It seems that between fedora10 and fedora11, the developers switched from fdisk, to parted for creating the initial pre-mke2fs partition table creation.
It looks like the implementation of this is broken, as it's writing the partition table with overlapping cylinder boundaries. While this can sometimes be ignored, it can in certain cases cause significant data corruption.
On an installation I took it through, using the latest installation media, in both manual & automatic partition creation, the layout looked like this:
The last two partitions turn out fine, for some reason. However, those two partitions should not have overlapping cylinders. After my very first installation, the system was completely unbootable, and not even fsck wouldn't rescue it. If this is possible, then that means that a system that's been online for months or even years could simply drop out of functionality simply due to a byte or two of system-critical data falling on that last cylinder. Considering that a lot of the time kernel data ends up on /dev/sda1 (commonly the /boot partition), this is something that should not be ignored.
Is there a difference between using GPT partition table when formating hard drives and MS-DOS partition table? What are the advantages/disadvantages of using either?
I just built a new 10.04 server. It has a 500Gb drive for the operating system and a 22 Terabyte drive that will be used for data. When I format the data partition, it only shows 2.2Tb available. I have this formatted as ext4. I know there is a 16Tb limit and I am going to repartition my drives, but shouldn't I at least be seeing 16Tb instead of 2.2
i installed puppy linux on my KINGSTON data traveler G2 and i cant figure out how i select my flash drive from the boot esc menu ive tried changing the boot settings
oh yea the flash drive is 5 gigs so i want to use its memory
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
USB flash disk partition disappeared as well as partition table I'm not sure about the cause
Code:
root@u# less /var/log/syslog usb 5-1: New USB device found, idVendor=058f, idProduct=1234 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Where did the partition table go? The device had one ext3 partition something around 4GB(size of USB storage device). I need to restore few files from this device.
I'm having a slight dilemma on reading data from a text file and outputting it into a table then displaying it. Basically I'm writing a shell script that takes information from text files then outputs the data into a table with 4 headings.he extracting of the data is fine, but creating a table i'm having problems with. I think it is possible to do it using the awk function, but so far i'm having a lot of difficulties.
I need to change my LUKS partition to NTFS as I do not need the boot partition any longer, but I need to keep sdb3 (truecrypted ext3) intact. This is how the disk looks now:
Code:
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I tried everything under the internet-sun that purports to allow my 128 mb usb pen to work like a writable floppy. The last I tried is: mount -o umask=0 /dev/sdc1 /home/myhome/usbpen. It works, but only a switch to root can write and root usurp my directory. just format back to dos/fat16, will work. But a repartition of my pen don't get changed after a reboot. How am I supposed to go back to 'good-old-microsoft' format.
I have a problem with one hard disk,now it says its Unallocated,and i tried to create a new partition on it,but it says that first i need to create a partition table,but when i create one,choosing msdos label,it doesnt to nothing. I used Gparted in Fedora,how can i create a partition table,so i can use my hard disk again?
We are in the process of backing up our hard drives to Blu Rays. I am creating tar.gz files and burning them to Blu Ray.Is it possible to use a simple (preferably Python-based) solution for creating images of those tar.gz files, of a predetermined size (to fit in the Blu Ray), and simply burn this images to the disc?Do you have any other approach for creating physical back-up of your hard drives?
I need to find a program or a way to edit the partition table and set the values and addresses for the partition boundaries manually. A while ago I had a very messy data loss that left me with a disk full of data but without a partition table (and without file indexes for some of the partitions on the disk). So, for recovery reasons I need to try lots of combinations of starting and ending addresses for each partition. Additionally it would be extra nice if I could do this with a live cd since I don't have the faulty drive attached to a working computer at the moment.
I was having trouble creating a USB Startup Disk in Ubuntu and used the command:
sudo dd if=/dev/zero of=/dev/sdb bs=1M count=1
This was a mistake as my USB flash drive was on /dev/sdc. If I am understanding this correctly, the command above deleted the MBR and the partition table. This disk had a single "/storage" partition on it. I googled a solution and found that the "testdisk" program seems to be the most popular solution for things like this. I ran it, selected an "Intel/PC partition" type, set the partition to a non-bootable primary Linux partition, wrote it, and rebooted.
Whenever I run:
sudo mount -t ext3 /dev/sdb1 /storage
I get:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Dmesg shows the following:
[20246.273941] EXT3-fs error (device sdb1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [20246.279376] EXT3-fs: group descriptors corrupted!
When I run:
sudo fdisk -l /dev/sdb
I get:
Disk /dev/sdb: 400.1 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I am trying to install Gentoo. Currently I have windows 7 on my primary Hard Drive.I decided to add in a second HDD that I got for free and use linux on that.I got through my entire install and at the end I accidently wrote grub to my second hard drive.When I rebooted it went straight to windows.So I have some questions. When installing to the secondary HDD does my boot partition and swap need to be on sda? or can they reside on sdb?Also I tried to re-issue the grub-install command and it said bash: command not found. How can I get grub to re-install? I tried to emerge it and same issue no command found.Do I need to redo the entire reinstall?My last question is If I have more then enough HDD space how much is too much for linux? Most people say 30 GB is all you need from what I have read but I assume 160 GB is going to go to waste?
This machine has UBUNTU & wINDOWS XP. I'm currently logged into UBUNTU. I was just checking the features of GParted and accidentally clicked Device > Create Partition Table. A default MS-DOS partition table is created. Now if I re-start the Gparted there is nothing. Its showing entire disk as UNALLOCATED space.
Lucky thing is All the drives (C:, D:, E:) are currently mounted and I'm in UBUNTU. I guess its possible to re-create the partition table using current status. how to do this. This is a lab computer. If its not recoverable. I'm completely screwed!
I accidentially overwrote the first 1M of my harddisk on linux (using dd). So, the partition-table is gone. I can still access all partition (except the first one) using /dev/sda2 (and so on), so the data is still there. I only need the partition boundaries to restore the table. How can I do this? The Linux-Kernel must still know them because all mount-points still work. fdisk -l /dev/sda doesn't work because it acctualy reads the partition table.
Purpose: Python, PHP, WebKit (hopefully), and pyqt development. There is Wubi for Ubuntu, which I am using right now. But Ubuntu 11.04 doesn't work well with my system. There is a Wubi like installer for Puppy Linux. There is Debian Win32 installer, but I think that does touch the partition table. My last option is to simply grab Ubuntu 10.04 LTS and hope it works. Would that be a viable solution considering my needs?
Do i have any chances to restore my windows partition table after tried to install debian and i used the entire disk instead of the free space i had alocated for this
after i figured out what i did i stoped the installation but was to late ... i answered yes at write partition table changes on disk question
i tried win7 automate recovery tool from dvd and manual install of mbr with no successful result
