Programming :: Display IP Address And Host Names In Wireless?
Jul 7, 2010can any one post the "Java Program to Display IP Address and Host Names in Wireless".
View 9 Replies
ADVERTISEMENT
Programming :: Java Program To Display IP Address And Host Names In Wireless?
Feb 25, 2011"Java Program to Display IP Address and Host Names in Wireless".
View 7 Replies View RelatedFedora Networking :: Resolving Host Names To IP Address ?
Jul 27, 2010At work we run DHCP. hostnames have the format: computername.city.mycompany.com
I have a laptop runing Fedora 13 and a desktop I use for backups, etc. My laptop is named copernicus. Desktop is named galileo. If ping either hostname from itself I get back the localhost IP address. If I ping the fully resolved hostname it tells me unknown host. The desktop is exporting an NFS share I use for backing up work data. I need the laptop to be able to resolve host names to mount the share since we use DHCP. The desktop is dual boot and if it is booted into windows my laptop can resolve the hostname properly. What do I need to do in Fedora to get it to register a hostname with the DNS and/or DHCP server? Should the domain and the search path below both say the same thing?
Here is resolv.conf on the laptop (I am at home). The desktop looks the same, except for a different nameserver. Both computers can resolve other hostnames, just not each other.
Programming :: Unable To Fix Syntax Error In Finding Ip Address Of A Host Name?
Apr 27, 2010Writing a program that finds the IP address of a host name. Sorry forgot to include the line numbers, but where the $$$ is where the syntax error is. The errors are syntax error before "{" token and syntax error before "if". I've looked throught the code for a couple hours and can't figure out what's causing it. The code is attached below.
#define WIN
#include <stdio.h>
#include <stdlib.h>
[code]....
General :: Get The Ip Address Of Host Using Of Host And Nslookup Command?
Oct 20, 2010HOW TO GET THE IP ADDRESS OF HOST IN LINUX WITH USING OF HOST AND NSLOOKUP COMMAND and after getting the ip address how to assign it in the variable
View 4 Replies View RelatedFedora :: Changing Host Names On Fc15?
Jun 22, 2011I'm building a replacement service, and in the not to distant future, I'll need to change the host name and IPs (ipv4) (I'll also be doing this on the fedora 10 box I'm replacing)
I can look around and edit a bunch of files to make it happen, but there has to be an easier way.
Ubuntu Networking :: Assigning Host Names On LAN?
May 29, 2011when I'm in my campus I saw things like this from tcpdump:
client-64-15.department.univ.edu
client-x-y.department.univ.edu
gw.nettokurabu.univ.edu
and my laptop got a name like that too (x and y being last 2 segments of the IP)out of curiosity, how to assign names like that to each IP? well, the names are not in dns records (can't resolve them to IPs)... when I set up (illegally) my on subnet with a routing software the addresses I used also already have their name without me configuring it before...
OpenSUSE Network :: Host Names Cannot Be Resolved Except For Ping
May 5, 2010I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
General :: Get Windows To See Host Names And Vice Versa?
Sep 17, 2011I have Windows and Linux machines on the same subnet. My router configuration correctly tells me both their machine names, and their IP addresses. However, when I try and ping a Linux machine from a Windows machine, or ping a Windows machine from a Linux machine, I need to use IP addresses rather than names. If I'm pinging a Windows machine from a Windows machine, or a Linux machine from a Linux machine, the machine name correctly resolves without any hosts file entries. Why is this?
I would have thought my router (D-Link DIR-655) would act as a DNS server itself. I see it has an option called "Enable DNS Relay", but from what I've read this won't help me. If it's relevant, the DIR-655 is used for internal traffic, with my ISP's Netgear DGN1000 used as a gateway to the Internet. It's on a different subnet though, and all my machines connect to my DIR-655, not the DGN1000. What do I need to do to have host names automatically resolved within my subnet regardless of the operating system that they're running?
Networking :: Internal Host Names Resolving Through External DNS?
Feb 6, 2011I just set up my first ever bind9 DNS server running on ubuntu server 10.04. This server is also my gateway/dhcp server.
Here is what is weird: If I do a dig @8.8.8.8 dschuett-lmtl.scs.local from any of my clients it resolves?!?! Dig shows that it got the answer from MY Bind9 DNS server (and NOT Google's of course), but why is it still resolving when I'm telling it to use and external DNS server?
The other weird thing is that the SAME EXACT dig command above does NOT resolve internal host names if I do it from the Bind9 DNS server. - Which is what i would expect SHOULD be happening if done from the client machines...
Here are the dig results:
From any internal client:
Code:
Server :: DHCP: Logging Host Names In Log File?
Jul 7, 2009What I am trying to do is log IP Address, MAC Address and the host name for records. So I can have a record of what PC got which IP address and when they got it. So far my search has yielded no results. It would not be that big of a deal as I could always look at the dhcp file, but it is generated dynamically (3rd party application using RADIUS and each user gets a host).
subnet 208.x.x.0 netmask 255.255.255.0 {
option routers 208.x.x.1;
option subnet-mask 255.255.255.0;
[code]....
CentOS 5 Server :: Name Resolution Of Host Names Using Bind?
Mar 21, 2011I installed bind & did not install chroot. I set up a fictional domain kelly.local. I am able to resolve FQDN (example: angus.kelly.local) in both dig & nslookup & ping on linux boxes.
I want to be able to resolve bare host names (example: angus) using bind. I get mixed results.
(1) linux boxes resolve bare host names & FQDNs just fine using nslookup & ping, but not dig. dig gives error:
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> angus
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 15241
[Code]....
Networking :: Multiple Domain Names On One IP Address?
Dec 19, 2009Is it possible to have one static IP address with a NAT network forwarding each domain name to certain internal/DMZ IP addresses? I know you can do it by port but if both websites are on port 80 can you forward to the corresponding server on the dmz.I ask this because I noticed the website braemere.com.au had to be typed into a web browser and entering the IP which is 202.47.5.7 did not take me to the website.
View 5 Replies View RelatedServer :: 2 Websites (domain Names?) 1 Cup Err Ip Address?
Dec 13, 2010So I'm looking to host potentialy three different...sites...I want to call them from the same machine. One is a radio station and the other 2 are just straight websites. So I wanted to know if I had to use different machines to accomplish this or can I alter maybe the http conf file or what. I did find this in the forums but wasn't quite sure if this applied to me. [URL="http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/"http://www.linuxquestions.org/questions/linux-software-2/serving-multiple-domain-websites-on-one-server-329914/[/URL]
View 1 Replies View RelatedFedora Networking :: Local Host Names Without Domain Using Bind?
May 10, 2009I want to use single label host names on my local LAN, without using any domain (at least no registered one). My machines should be named in a fashion similar to 'myserver', 'mydesktop' etc. so that i from a browser on any LAN machine may write 'http://myserver', and get the webserver on 'myserver' (so NO domain part, e.g. myserver.domain).
Do i need to create a DNS zone for each host or is there a way to put all host in a single zone, if so; which? Would such a name be considered a root domain?
Ubuntu Networking :: Able To Ping IP Address But Not Domain Names?
Jun 15, 2010Since two days i m not able to browse websites using the domain names but able to ping/browse using IP addressed. I have done the following:
1. Using wireless i m able to get IP address of DNS (8.8.8., Gateway, localhost & router ip address
2. Disabled wireless and connected ETH0 but still the same problem
3. not able to edit resolv.conf
sudo gedit resolv.conf
** (gedit:4179): WARNING **: Hit unhandled case 0 (Error opening file: Input/output error) in parse_error.
[code].....
General :: View All Domain Names Hosted On An IP Address?
Oct 21, 2009Is there a way you can view all domain names hosted on an IP address using dig or whois? Say if a server is using Name Based hosting??
View 5 Replies View RelatedRed Hat / Fedora :: Display Names Of Files Alone?
Jun 25, 2010Is there any command apart from ls command in Rhel that could display names of files alone in particular folder ?
View 7 Replies View RelatedCentOS 5 :: Configure Sendmail To Accept Email Without Domain In Local-host-names
Mar 23, 2011dammit... all that typing and I hit the wrong "submit" button. *sigh*
Ok, I have a couple of SMTP servers for our infrastructure. They are running Postfix. I have them configured so that specific email addresses such as support@mydomain.com and billing@mydomain.com all go to a new support server that I am building with osTicket. Lets call that server SUPP1.
SUPP1 runs sendmail from the default install of CentOS 5 i386. At this point everything runs great. New emails get added into the osTicket system via a pipe in sendmail. Here's where the problem comes in. In order to accept mail, sendmail has to have the domain listed in local-host-names and the addresses in virtusertable. That works just dandy. But in doing so, sendmail believes it is the destination SMTP server for "mydomain.com". That means that I can't send mail from that server back into my normal SMTP servers. So things like the LogWatch, cron jobs, etc can't send notifications. Is there a way to work around that? For sendmail to ignore local-host-names for outbound email or something?
OpenSUSE Install :: Don't Want To Display Account Names?
Sep 22, 2010How can I turn off the login names on the welcome screen? I don't want to display account names.
View 5 Replies View RelatedGeneral :: Display Only Permissions And File Names Using Ls Command?
Oct 18, 2010and how to list all files in a directory including full path, owner, group and permissions for each file
View 3 Replies View RelatedUbuntu :: Gnome-RDP Does Display Group Names In Lucid
May 10, 2010I recently updated to Ubuntu Lucid Lynx from Karmic (fresh install though). All of the packages I used in Karmic seem to work nicely in Lucid, with one exception gnome-rdp. I'm a sysadmin in several windows environments so as you can imagine I love the session storage and grouping features. Unfortunately gnome-rdp is not displaying the group names. it stores my session and creates the group structure just fine, it just doesn't show me the group names in the app or the right-click menu on the top panel icon. My gut says it has something to do with the new Lucid theme, but I like the new theme. Does anyone know of a config file I can edit, or something I can do to disable theme integration, just for gnome-rdp?
View 3 Replies View RelatedRed Hat / Fedora :: Doesn't Display The Names Of Partitions After Made
Oct 21, 2010i have made partitions using fdisk , in fedora as / , /boot , /home but when i used fdisk -l it doesn't display the names of partitions , how can i made it work so that it displays
/dev/sda1 /
/dev/sda2 /boot
/dev/sda3 /home
General :: Comparing Two Files - Display The User Names That Are In The First File And Not The Second
Sep 17, 2009Im trying to compare two files and I only want to display the user names that are in the first file and not the second.
So I have one file named final.txt (which contains every user name and only the user names in a list no other information)
Then I have another file Over1.txt (which only contains certain users that have different permissions This file is also setup differently with the user name and some information about the user after the user name.
I need a way to compare final.txt to over1.txt so that I will only display the names that are in final.txt but not Over1.txt
Ive tried using diff and comm but just cant seem to get it two work correctly. Im not sure if im missing a option or what.
General :: Get Only Ip Address Of Host?
Oct 20, 2010my problem is when iam typing
a=host test.com
echo $a
output
test.com has address 17.108.43.86
now i want to print only address (17.108.43.86) and don't want to print this line [[URL] has address] how to do this
Networking :: Some Other Host Already Uses Address?
Oct 17, 2010I am setting up a server, with a static IP address. I thought I did the setup correctly, including setting up the static IP address. When the system restarted, I saw a message flash about some other host already uses address 72.86.26.xxx
Then, once logged in, I got a system message: System is not receiving updates, check network connection.
I went to System: Network Configuration, and under Devices, I saw:
Inactive Device: eth0
I clicked on activate, and I received the same message: some other host already uses address 72.86.26.xxx
The file /etc/sysconfig/networking/devices/ifcfg-eth0 reads:
#realtek Semiconductor, Ltd. ...
DEVICE=eth0
BOOTPROTO=none
BROADCAST=72.86.26.255
[Code]....
Programming :: Pass Ip Address, Port Address And Some Parameters From Command Line?
Apr 1, 2011I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
View 1 Replies View RelatedProgramming :: Shared Memory Address Area In Process Address Space?
Feb 21, 2011if i attach a shared memory to my process whch part of the address space it will add(like stack, heap, data, code...).
View 3 Replies View RelatedProgramming :: Physical Versus Virtual Mac Address And Mac Address From NIC's Firmware?
Apr 6, 2011I need a small shell based program that prints the mac address of physical ethernet adapter from it's firmware. I need this utility for license generation and appliance activation. I have tried several example but none of them is flawless, The easiest method I have found is to parse the output of "ifconfig" command but it has also some drawbacks.
1. Firstly program should differentiate between physical and virtual adapters. Physical means installed on board(wired or wireless) or installed additionally. Virtual adapters are those created by VPN or created by virtualization apps such as VirtualBox/VMWare etc. I am not interested in virtual ones.
2. In case of more them one physical adapters(wired and wireless), it should print the mac address and description(name & vendor) of both/all adapters.
3. If media is disconnected then also it should be able to read the mac address and description(name, vendor) of card.
4. This one is bit complex. I know that 'ethtool' can show you the universal mac address but it's limited to use only 2 types of drivers and won't work in all cases.
Programming :: Translate Virtual Address To Physical Address In Application?
Nov 18, 2009I want to translate the virtual address to physical address in linux C application, how to do that?
View 1 Replies View Related