For eg: $NUMBEROFPASSES=6.19 to round up I use NUMBEROFPASSES=$(printf %.0f $NUMBEROFPASSES) What I need to do is round up from eg: 6.10 to be 7 and if lower than 6.10 round down to 6
View 5 RepliesI'm learning shell scripting using bash and I want to generate 4 floating point number with 5 decimal places and write them to a file and a variable. I've done all this except the $RAMDOM enviroment variable does not generate a float number but a integrer.
[code]...
I have lines in some files that look exactly as below, and the line numbers they occur in are always the same. (Lines 136-139)
W 0.00000000 0.00000000 2.00000000
W 0.50000000 0.50000000 2.50000000
W 0.00000000 0.00000000 3.00000000
[code]...
I have a directory with files like this:
Code:
And what I'd like is to have the files renamed like this:
Code:
How could I code it so that it removes the numerical part of the filename (at the beginning), even with different patterns (like the 01 - artist vs the 01-artist)?
I just need to perform a simple operation of subtracting two numbers - that aren't whole numbers, i.e 200.56 - 67.24attempting to use expr i merely get "expr: non-numeric argument"
View 3 Replies View RelatedId like to share with you a strange behavior I�ve been seen with the printf C language function running in Fedora.The code opens a file as showed:descString = fopen( strcat( stringName, txt), a+);There are also some printf functions in the code.However, instead of the printf functions to print their content at the screen, theyve been printing them in the file with the descString file descriptor.Have you ever seen something like that?To print something to the file I use the fprintf function. I didn't make a mistake to confuse printf with fprintf. I'm sure.
View 2 Replies View Relatedmisunderstood structure definition at the beginning
View 3 Replies View RelatedI got curious during the construction of my program to search for blocks of text that contain certain words, and wanted to print out blocks of text with the words I was searching for, initially, in ALL CAPS and seperated by tabs for easy identification. That got boring, though, so I thought, "Can printf do colors, too?" Yes it can.... Who knew?
[Code],,,
am writing a small search program for my class. I have decided to use indexing for my program. Ive researched online about indexing and how search engines do it. If im gonno do that I need to create inverted files to associate files to numbers ( numbers being the index of my paths ) . Now I was wondering what would be the best way to create an inverted file ? I was going to create sql tables using mysql api in C but then again there is no array data type or vectors to store few numbers in a single column in mysql and it is not advised to use Enum or SET
View 14 Replies View RelatedI am trying to port some "C" code from Solaris to Linux. I have a Dell PowerEdge R610 with an Intel Xeon E5504 quad core processor running Red Hat Linux Enterprise 5.3. I am compiling in 64 bit mode. I have managed to get the code compiled and linked, but when I attempt to execute it, I get a core dump in one of the C library calls (like strcpy or printf.)
I have a static library that contains our own code that makes the call to the C library. If I move the library method into the source file with the main method and rename it to be certain that I am executing my method instead of the method in our library, the call succeeds. Eventually another static library call is made that results in a core dump in the shared object. I compile my library code into a static library with gcc as:
[Code]....
Our assignment is to take in two numbers and add them. While the inputs will always be numbers, we are to inform the user if they are doing it wrong. My code:
[Code]....
The code worked fine before I tried to idiot-proof it. I'll probably end up nesting the if statements checking if the first two inputs are not null, but I'm more annoyed at why the script isn't working.
I'm making an bash script.
As input you can input different numbers from 1 to 3.
Depending from the input a text shows up.
as a result of a find command, i have
852065 72: /bin/gunzip
852065 72: /bin/gzip
852065 72: /bin/zcat
(the first column is inode number and the second is size if you're curious)
I want to be able to format it in a way such that:
852065 72:
/bin/gunzip
/bin/gzip
/bin/zcat
I know I can get the bottom half using awk- but I can't figure out how to extract the first set of numbers and get them to appear only once
I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:
test.txt :1 6 1 3 6 8 10 2 4
I would like to read those numbers using CAT and store them into an array:
numlen=${#num[*]} - (must be like this because it is a part of a larger program)
I am intended to simply make printf give "001 002 003 004 006.... 150" but with the single command line of SH (dash) ... not easy ...
Code:
tucholsky:~$ seq 1 1 150 | sed 's/([0-9]+).*/1/g' | tr '
' ' '
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
[code]...
For the geeks, which distro/version is it, based on the code above
I've written a bash script that extracts the audio out of a movie file and saves it out in separate .wav files using ffmpeg. Here is the key ffmpeg command:
Code:
ffmpeg -i $movie_file -vn -ss $start_time -t $duration ${file_name}_${counter}.wav
$start_time and $duration are floating point numbers that contain time information in the form of seconds and milliseconds (ss.xxx). It is important that I am able to control the time down to the millisecond.
My script works exactly as hoped on .avi files. My script needs to work on an existing archive of .mov files. when I try to use it on a .mov, the audio files created always have start times and durations that have been rounded up to the nearest half-second. This breaks up the audio in the wrong spots, and creates files that last too long and have too much extra audio. What can I do to make my ffmpeg command create .wav files from .mov files that properly recognize a specific number of milliseconds? Or, asked another way, how can I eliminate the rounding behavior?
I have some code that opens a directory and reads in the names of files which are e.g. 0001, 0002, 0003 up to 9999I need to get all these numbers and then generate a new number that is not one of these numbers already.here is my code to check the files in the directory
DIR *d;
struct dirent *dir;
int i = 0;
[code]....
write a script in bash or shell to add the numbers between and including two numbers
View 3 Replies View RelatedAs some of you know that I am new to this forum. I have another problem that I got stuck on. I have this file called "Fib.rbb" and my instructor told us to write an interpreter program by using Fib.rbb.
"You are to write an interpreter in Perl for Rongs Basic Basic (RBB) as explained in class. The BNF description for RBB and a test file called Fib.rbb are part of the RBB.zip file which is available in the Course Documents folder on blackboard. If you call your interpreter myIntp.pl, you would execute the program via perl myIntp.pl Fib.rbb
Code: Print "A few Fibonacci numbers:"
Looking for code to add 5 numbers in assembly? I want to use array for input of those 5 numbers. No problem if the output is 1 digit(0....9).
View 3 Replies View RelatedI am trying to extract 2 numbers from a same file and my goal is to print them both in another file, on the same line, separated with a space. I have to do that for 20 files and I would like to have therefore 20 lines like this in the output file. It would look like this :
Quote:
number1_file1 number2_file1
number1_file2 number2_file2
...
...
number_1_file20 number2_file20
So far, I did only extract one number and got an output file like this :
Quote:
number1_file1
number1_file2
...
...
number1_file20
And I did this by running a bash script with the following content :
Code:
#!/bin/bash
ls execution$1$2*.* | while read filename
do
cat $filename | grep -e "Total aborts:" | cut -d " " -f3 >> abort$1$2.dat
done
$1 and $2 are just strings to identify the different files I want to consider in this loop. This script works well to extract a number which is the 3rd field of a line starting with "Total aborts:".Now, how could I change this script to do what I mentioned above (i.e. extracting two numbers from two different lines) ? The second number is the 3rd field of a line starting with "Total throughput:"
I want the get the date of the oldest log in this directory and compare it with current date.Time of the each log can be seen before ".Z" prefix.I have written the following piece of code. However, it is not working for the following case:
LOGDAY=20101129
TODAY= 20101201
Difference is 72, which is not correct, since these are dates.
I'm trying to write a program that generates a random number and then tells if it is prime or not. I have doe some research about how to calculate prime and random numbers but I'm still having trouble. I don't really get how to calculate a prime number. I know a prime number is a number that is divisible by 1 and and itself. how to calculate a prime number in C?
View 10 Replies View RelatedI am struggling to understand why nawk matches values that are either 1 or 2 digits in length, but not 100 (3 digits).
Am I missing something obvious ? Should I use substr to remove the % ?
I am sure it's something to do with character and string matching behaviour with nawk.
Code:
I have a program that sends QByteArray datagrams over a udp socket. I would like to have 4 bytes of the datagram that contain a 32 bit integer. When saving numbers to the QByteArray, I have tried the static function number(int) and member function setNum(int), but they convert the integer to its decimal string representation and save that in the byte array. So if the number were 10, it takes 2 bytes, if it were 10,000,000 it takes 8 bytes. This wastes space, and makes it more difficult to get the number when it is packed with a few other pieces of data in the same datagram. Is there a standard way of doing this in Qt?
View 1 Replies View RelatedI'm playing around with some shell scripting and I've got a directory call CS005 and I'm trying to write a script to I can locate to the directory really quick and easy.
export CS005DIR=/home/stud/0/043234/CS005
Now I get this error
CS005DIR=/home/stud/0/043234/CS005 No such file or directory.
This is because I've got numerical values within my variable.
Is there a way to allow numbers for variable names?
If I do:
for i in $(cat names); do seq -f "$i%03.0f" 0 999; done > output5.txt
I got ( tail snipped):
997munt
998munt
999munt
If I do:
for i in $(cat names); do seq -f "%03.0f$i" 0 999; done > output4.txt
I got:
997Zygmunt
998Zygmunt
999Zygmunt
How I can get numbers from 000 to 999 appended like:
Zygmunt997
Zygmunt998
Zygmunt999
I would like to create a small C tool. I encounter a problem of how to make a function to check an input chars contains numbers (started from the second element).
Some samples:
char *mychar= "a3547"; (The result of function checking this is true)
char *another_char = "t6548"; (The result of function checking this is true)
char *next_char = "appl3"; (The result of function checking this is false)
char *new_char = "b1aa3"; (The result of function checking this is false)
I am trying to generate sequence of number in the order of :
1
2
3
4
[Code]....
I have a text file with 4 columns and 18 rows. All are integers. I wish to find the average of first 12 numbers in the third column using 'awk'.
View 8 Replies View Related