i get some trouble setting up good environment in linux.i have problem regarding connecting php(under linux) to a sybase server(under windows)is there anyway connecting this two technologies?.
View 1 RepliesI get some trouble setting up good environment in linux.. i have problem regarding connecting php(under linux) to a sybase server(under windows),,, is there anyway connecting this two technologies?..
View 7 Replies View RelatedAt work we have a Sybase Adaptiver Server 9.0 database running, it has to stay there for now, and we are developing a web application that will connect to it using PHP.I was already able to make it work using ODBC on Windows and using odbc_connect on PHP.But now we are moving to Ubuntu, and we are trying to get it to work on it.I already have Apache2 and PHP5 up and running.There are two ways (I can think of) we can do this, one is using ODBC and then use "odbc_connect" and the other is making "sybase_connect" work on PHP. Being the latter probably the best one since you wouldn't have ODBC as an intermediary.
Either way, as long as it works I'm happy. ODBC would be fine to meet our requirements for now.I already have ODBC Data Source Administrator but no idea how to create/include/add the Sybase driver.We also tried setting freetds up, but that didn't work either, we might be missing something.
I'm attempting to get freetds and sybase up and running on my centos server, mainly for nagios - MSSQL checks. I've installed freetds freetds-devel ok but am having issues getting SYBASE installed. I've had a go via cpan but get a failure on the sybase environment variable. I've set it to /etc where the conf file is located as well as trying /urr/lib64 for the tds libs, but no joy. Has anyone had much luck with this on centos?
export SYBASE=/etc
[root@nagios ~]# echo $SYBASE
/etc
cpan DBD::Sybase
CPAN: Storable loaded ok (v2.15)
[Code]...
1. i need to check whether the oracle database is running or not if it is running it will run auto mount script.nohup /u01/app/oracle/product/11.2.0/dbhome_1/bin/dbfs_client dbfs@xxxxx -o allow_other,direct_io /u01/app/oracle/DBFS/XXXXX < /home/oracle/passwd_dbfs.txt&nohup /u01/app/oracle/product/11.2.0/dbhome_1/bin/dbfs_client dbfs@xxxxxx -o allow_other,direct_io /u01/app/oracle/DBFS/XXXXX < /home/oracle/passwd_dbfs.txt &2. For every 1 hour i need to check above mount points is mounted or not if it is not mounted it should be mounted.
View 3 Replies View RelatedMy freetds.conf
Code:
# /usr/local/etc/freetds.conf
# $Id: freetds.conf,v 1.12 2007/12/25 06:02:36 jklowden Exp $
#
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
[Code]...
We purchased a new database system at work last October, ditching the old system because of a lack of support from the vendor. This is a retail Point of Sale and Backoffice database system. I am not sure what system the new one runs on, but the system we replaced was a Firebird data base. The reason I am posting is because we are now in need of the information contained in the old database which was not completely imported into the new system. Unfortunately, we parted company with the old vendor under extremely hostile conditions, and they are not a source of help for this problem, nor are the new vendors.
Basically the problem is this: The database in on a Windows XP system and I found a copy of SQL Manager Lite 2008 on the system, which after quite a bit of studying, I figured out how to extract the database into a removable file. I have this file (178MB) on a USB stick in a file called Backoffice.fbd. I can get into this database with MySQL. All I want to be able to do get into the database and create tab deliminated spreadsheet files for each of the database sections (Customers, Repairs, Sales History, stock files, etc.) Is it possible to do this with Ubuntu and MySQL and if so, can an expert suggest one or two things to get me started.
I have an application running on a centOS machine that needs to access a database on a CentOS server. I granted access to all users with a certain user name and password.i opened up port 3306 as well with the following command: /sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPTbut whenever i try to connect from my machine i get an error:ERROR 2003 (HY000): Can't connect to MySQL server on '172.16.102.129' (113)I am using mysql version 5.0.77 on centOS 5.5.
View 1 Replies View Relatedi have two machines at home running ubuntu linux and windows connected by lan. on ubuntu machine i have mysql installed, how do i go about accessing ubuntu mysql database on my windows machine.
View 2 Replies View RelatedI mean, isn't that exactly how normal home users can visit search engines such as Google or Bing and search for information?
View 7 Replies View RelatedIs it possible to setup apache to normally block an IP from accessing a site until that IP is in a database/file?More or less, I need a login system that another script can add/remove the IPs and the site can be accessed by only those IPs.
View 1 Replies View RelatedI am writing a simple application that will run as user foo (i.e. Ubuntu user foo).However, the application will connect to my database as (database user foobar). IIRC, database users have nothing to do with Linux system users - but I just need to clarify that.So can an app launched to run as user 'foo', connect to a database as user 'foobar'?
View 1 Replies View RelatedSo i ran a srcds server (source) in the backround using &.ccess it again or atleast kill it" ./srcds_run -console -game garrysmod +maxplayers 52 -autoupdate &"
View 2 Replies View RelatedI've been trying to figure out how to access tomcat6 pages outside of the computer actually running the tomcat6 server. I can access the tomcat6 web pages fine on the computer running the server, but I can't seem get to it on another. I'm probably not setting it up correctly or something, but I've attempted to access the tomcat6 server by following this form:
[URL
Did I not set up the tomcat6 server correctly?
how do I create a shell script that looks for connections running on a oracle database. e.g connection name is CONNECT and database name is DBTEST. I want to know what processes with the name CONNECT are running in database called DBTEST. Am creating the script on the server side. I know about the ps -ef | grep command but how to point to a particular database I don't know.
View 4 Replies View RelatedI have 32 gigabytes of my hard drive wasted with a vistool installation a flaky don't look at me wrong or I will brake and you will have to reinstall me stinking winbloze
simple I want to fly my radio controlled helicopter and both programs that configure the radio transmitter so it talks sense to the model are windoze only almost (the wrong driver for the interface cable came with it the driver crashed and scrambled the configuration of the transmitter) the lesson here is XP drivers DO NOT! work with Vis-Stool
One of them will run on .NET (for windoze) and wine (I have no idea of how to install .net for linux ) it just dose not talk to the interface cable witch has a linux kernel module and connects the cable to /dev/ttyUSB0
Is there a way to make /dev/ttyUSB0 show up as a COM4 in wine.
I installed Tomcat5.5.23 on CentOS5.2 running on Sun xVM Virtual Box2.1.2. When i try to view Tomcat( Running in Vitual Centos)'s home page in the web browser of Host( XP sp2) am getting the "Connection Time out" error.. How to resolve this problem.
View 2 Replies View RelatedWhat database can I use for c++?,this is my first week programming in c++.
View 14 Replies View Relatedi have an open source application that was developed in C++ (it uses objects and namespaces all over the place). I also have another application that was developed in C. Now i am trying to insert the code made in C into C++ application, but when i do that , i get this error on compilation of the source code:
Code:
error: 'mpi_init_vars' was not declared in this scope the function mpi_init_vars() is not part of object oriented programming and it doesn't belong to any scope, it was compiled into an object file and i am linking it with all objects of C++ application.
How can invoke the C function from C++ object oriented code?
sql statement. I am trying to check if there is such a value in the database.
Code:
string NewMovie = "ww";
string queryText ;
queryText = "Select * from movie_info WHERE movie_title = '"+ NewTitle +"'";
MYSQL *conn;
conn=mysql_init(NULL);
mysql_real_connect(conn,host,username,password,database,0,NULL,0);
[Code]......
return 0; The problem i am facing is how do i check if the value is found. I read up and found that a query will return a value of TRUE if the query is a success and a FAIL if there is an error. How do i call these values and then based the check on it?
I am using Centos. I have written some scipts in python that access my routers and fetch the configuration, etc. Now i was thinking of creating a web interface which i can access from my windows XP. I want it to have good look n feel :-),
View 7 Replies View RelatedI am pretty new to PHP so excuse my dumbness. I've searched this up in quite a few places and cant find anything : Basically, I've made an array, within it are 3 more arrays. Their are two values in each array, 'Name' and 'Age'. Basically I am using a While statement to try and cycle through the 'age' value of my array and state whether or not the person is eligible. (I am actually just learning so I'm doing this to just test myself).
Here is my code
Code:
<?php
$people =array(
array('name' => 'Bob', 'age' => 15 ),
array('name' => 'Jhon' , 'age' => 10),
array('name' => 'Sue' , 'age' => 7));
//($value =& $people[0,1,2][age] );
Here was an attempt to try and create a reference to age, I tried it many different ways
while($age < 10) {
echo ('$name, is eligible') ; } ?>
Okay, so I tried to do this through two ways, one way I tried to create a reference to age, then evaluate it, without that line of code their would be no reference, which way is correct, why wont it work? I am using Xammp, so when I launch local host I get an undefined variable error. What To Do?
I want to install Sybase ASE 15 on CentOS Linux 5.6 has anyone ever done that.
View 1 Replies View RelatedI'm trying to install Sybase ASE EXpress 15.5 on Ubuntu and am getting the following error message: ./startserver: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory.
View 3 Replies View RelatedI need to reconfigure my php to have Sybase support. However, I am not sure which library to use. I'll try freetds but I am not sure if it will work. I used it before with Microsoft MSSQL.
View 3 Replies View RelatedHow to create a database using c language it includes structures, pointers, arrays and switch..
View 4 Replies View RelatedI have a php scriptI want it to ping list of ips from a databse(using fping) and based on the status of the values to put them in a field(status) into the database(0 if down,1 if up)i executed tghe script and it gives me this error:Thread 1 - 17:51:01 26-04-2011 4.2.2.2 alive Couldn't execute query.I cant see what 's wrongthis is the source of the php script:
<?php
require_once("conf.php");
$connection1 = mysql_connect($h, $u, $p) or die("Couldn't connect.");
[code]....
I have created a database which stores students grades for different stages of a project. One of the stages of the project is the specification part. I have a simple bit of html code which is going to be used as the searching facility. I want the user to be able to enter their ID and then it will display only their results. At the moment, it is displaying the results for EVERY student because I cant seem to find the correct syntax for my statement.
Heres the HTML code
<html>
<head>
</head>
<body>
<body bgcolor="#6881bb">
<center>
[Code]....
At the moment when i click the button, no matter what I enter every students marks appear on the screen.
I think, but obviously dont know for sure because if i did i would know how to solve the problem, the code that i need to change is in green.
How to shorten the long URL without using database(i.e. without storing url entries in DB)?
View 2 Replies View RelatedI am trying to unload file from a database. Which contains few lines with the character below. Rest of the data was unloaded appropriately.
Code:
a) What does this below character means?
b) How can i remove it,
I already have
Code:
sed '/^$/d'
c) Will this effect the file by any means (If I am guessing properly, this is the eof notation)