OpenSUSE :: Virtualbox Usb Not Working After Upgrade From 4.0.4 To 4.1?

Sep 1, 2011

epositories/Virtualization:/VirtualBox_backports/openSUSE_11.4_Update_standard repo the usb support was working but after the upgrade it is not working any more, note that I removed the old version of the extension pack to install the new one "VirtualBox 4.1.2 Oracle VM VirtualBox Extension Pack"

View 2 Replies


ADVERTISEMENT

OpenSUSE :: How To Upgrade To Latest Sun VirtualBox (CLI Method)

Feb 13, 2010

Make sure you have the Sun VirtualBox repository installed and enabled.

If not, you can download this file [URL] and copy it in the directory /etc/zypp/repos.d on your system.
refresh this repository (only needed if autorefresh is turned off for this repo)
(sudo) zypper ref virtualbox
upgrade to the latest Sun VirtualBox
(sudo) zypper up -r virtualbox
recompile the VirtualBox kernel module
(sudo) service vboxdrv setup
Done! No need to reboot.

Code:
# rpm -qa | grep VirtualBox
before -> VirtualBox-3.1-3.1.2_56127_openSUSE111-1.x86_64
after -> VirtualBox-3.1-3.1.4_57640_openSUSE111-1.x86_64

View 5 Replies View Related

OpenSUSE :: Can't Recompile Virtualbox Kernel Modules After Upgrade To 11.4?

Mar 20, 2011

This has got me stumped. I expected to do /etc/init.d/vboxdrv setup after the upgrade from 11.3 to 11.4 but the command fails. The log is (it seems to repeat so I only quote the final bits to make it fit into the wordcount limit):

Code:
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.37.1-1.2-desktop/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules

[code]....

View 2 Replies View Related

OpenSUSE :: Data Corruption In VirtualBox 4.0.4 From Virtualbox.org?

Mar 7, 2011

Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.

View 1 Replies View Related

OpenSUSE :: Flashplayer Not Working After Upgrade FF?

Nov 29, 2010

I installed SuSE 11.1 again because of the higher resolution. Installed manually the latest Adobe Flashplayer and all worked well. Now I installed Firefox 3.6 and it also works well except for the flashplayer. I cannot reinstall the player because it is already installed.

hans@linux-acry:~> rpm -qa | grep flash
flash-plugin-10.1.102.64-release
pullin-flash-player-11.1-1.1
flash-player-10.1.102.64-0.1.1
libflashsupport-1.2-4.20

Is there a way to make the player work in the new version FF3.6 or must I de-install and the install again?

View 3 Replies View Related

OpenSUSE Install :: How To Upgrade Non Working 11.2 To 11.3

Aug 2, 2010

On my desktop PC I have openSUSE 11.2 installed but this os as screwed up. For example: the mouse's left button not reacting at all not in GNOME nor KDE. So I fought to upgrade to 11.3 but my question is how can I do it without losing my data and settings. I have there a TexLive working environment and I don't sure I will able to do it again on new installation.

View 6 Replies View Related

OpenSUSE Hardware :: Numpad 0 Not Working After Upgrade To 11.3?

Jul 25, 2010

I can work around it for now if I have to, but it's a weird and annoying bug. Basically, since installing openSUSE 11.3 RC1 I've been unable to use the 0 key on my numpad. The rest of the numpad functions correctly, it's just the 0 key and it is in both numlock on and off modes (not that I ever use it in off, but I tested anyway). This is the relevant output from xev:

Code:
KeyPress event, serial 35, synthetic NO, window 0x5e00001,
root 0x1ad, subw 0x0, time 3291105, (574,178), root:(588,243),
state 0x0, keycode 87 (keysym 0xff9c, KP_End), same_screen YES,
XLookupString gives 0 bytes:

[Code]....

View 2 Replies View Related

OpenSUSE Install :: Kdesu Not Working After Upgrade From 11.2 To 11.3?

Jul 29, 2010

After I upgraded my suse 11.2 to 11.3 (via zypper dup, all worked well), kdesu is not working anymore. A "kdesu -c /sbin/yast2" for example will not produce any output in the terminal.

View 1 Replies View Related

OpenSUSE Network :: Ethernet Not Working After Upgrade To 11.4?

Jun 12, 2011

system:
destop
openSUSE 11.4 KDE
single wired network connection
running as a headless server
upgrade from 11.1

Problem: I had a bunch network services running under 11.1 with KDE. Now after upgrade to 11.4 full network functionality is broken. I was using ifup but now is broken. Between ifup and NetworkManager I can demonstrate the full required range of functionality but not all at the same time (the union of functionality of each provides the full required functionality, but not individually). WOL does work in all cases.

With 'ifup', it seems that everything is 'working' as before, but services are broken when accessed from outside. eth0 up and fuctioning with statically assigned IP. Outgoing connections seem to work - I can browse the web. But trying to access services from outside is broken. VNC is rejected. Connecting to SMB shares reports login error. TFTP doesn't respond. SSH connection is rejected.

Although sometimes it will get in a state that everything except VNC works (connects but then is dropped upon login with "Error while waiting for server message") but I can't consistently reproduce this state other than it seems to happen after some extended period of time.

I have verified the firewall is off and apparmour is off.

On the other hand, everything works with 'NetManager' (both KDE and Plasmoid) with no other changes. The problem here is that it does not seem possible to set a static IP address - eth0 doesn't show up in the list of wired interfaces to be able to select and edit. That's problem 1 - I need a static IP. (I suppose I could reserve an address at the DHCP server, but a static IP works 100% to get the right address). The other problem is that neither NetManager starts at boot and only start _after_ login at the console - that won't work as I never log in at the console. (I suppose I could set it up to login automatically into a console or something but I would rather not)

View 9 Replies View Related

OpenSUSE Install :: X Stops Working After Upgrade To 2.6.34.4-0.1-desktop

Sep 10, 2010

Last night I upgraded the kernel to 2.6.34.4-0.1-desktop and now X has stopped working. I can go into run level 3 OK.

I have tried removing the xorg.conf file, using a copy of the install xorg.conf. I have also tried reinstalling the ati drivers

-rwxr-xr-x 1 readyp home 101178081 2010-08-07 23:45 ati-driver-installer-10-7-x86.x86_64.run
-rwxr-xr-x 1 readyp home 103164399 2010-08-29 21:25 ati-driver-installer-10-8-x86.x86_64.run

the ATI drivers stop at 75% and do not complete.

If I go into run level 3 and run startx the screen goes black and all the keys stop working (Ctrl-Alt-F1 etc..)

I can attach the Xorg.0.log if you like, but it does not look strange.

I am sure the hardware is OK as I have my system dual boot with 11.2 and 11.3.

View 1 Replies View Related

Ubuntu Installation :: Upgrade Virtualbox From 3.0.12 To 3.1.4

Mar 25, 2010

I'm currently using the PUEL version of Virtualbox 3.0.12 and whenever I open it, it prompts me to update - see screengrab.

Clicking that link and choosing to open it via the package installer (see screengrab) results in the error screen below - another screengrab.

I then realised the deb file was named Jaunty, so went to the Vbox website to download the Karmic file.

Running that via package installer produces the same error - Error: Conflicts with the installed package 'virtualbox-3.0'

Do I need to remove the old version first? If so, how do I do that (given that this is the PUEL version not the open-source version) and will my existing virtual machines (I've got WinXP and ChromeOS) be safe and still work afterwards?

My reason for wanting to upgrade is to virtually try Ubuntu 10.4 which I just cannot get to run or install in Vbox (either from a CD or from the iso image)

View 5 Replies View Related

Ubuntu :: Unable To Upgrade VirtualBox

Sep 1, 2011

I have not been able to upgrade VirtualBox for a while now. I get the attached error

View 9 Replies View Related

Ubuntu Installation :: 10.04 - Unable To Upgrade VirtualBox

Jul 30, 2010

I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.

View 4 Replies View Related

Ubuntu Installation :: No Audio In VirtualBox After Upgrade To 11.04?

May 5, 2011

I just upgraded to 11.04, and apart from an initial freakout because I didn't realize why all my settings were borked*, I haven't had any difficulties... until today. I ran my virtual WinXP machine (VirtualBox) to watch some streaming Netflix, and the sound didn't work. Sound still works under Ubuntu just fine. No idea why it didn't survive in my virtual machine.

I noticed when I started that it said there was an upgrade for the VirtualBox software, so I did that, but that didn't fix it either. I'm using PusleAudio for the Host Driver and ICH AC97 for the audio controller on my virtual XP machine. These worked before the upgrade, now... not so much. I tried switching the driver to ALSA and the controller to SoundBlaster 16 (and other different available combos, etc), to no avail.

* It turns out that crap pile, Unity, did away with all my nice custom panel layouts and configs and replaced them with something ugly, unwanted, and non-intuitive. I'm using "Ubuntu Classic" now because Unity is horrible.

View 3 Replies View Related

Ubuntu :: Upgrade 10.10 To 11.04 - Virtualbox Can't Be Located On The Menu

Apr 29, 2011

Ubuntu 11.04 desktop 64bit Just upgrade from Ubuntu 10.10. But virtualbox can't be located on the menu. Neither I can start it. how to start it and get it added to the menu.

View 2 Replies View Related

Ubuntu Installation :: 9.10 To Lucid Upgrade Broke VirtualBox?

May 13, 2010

Since my distribution upgrade to 10.04 my VirtualBox guest of XP SP3 will not boot, it bluescreens and reboots. I can boot the guest in last known good config and in safe mode but I have no CDROM. I attempted a tools install over the lan but that resulted in the same blue screen. Tried installing the virtualbox-3.2 beta package and guest tools and had the same results..

View 1 Replies View Related

Ubuntu Installation :: Virtualbox Can't Be Located On The Menu After Upgrade To 11.04

Apr 28, 2011

Ubuntu 11.04 desktop 64bit Just upgrade from Ubuntu 10.10. But virtualbox can't be located on the menu. Neither I can start it. how to start it and get it added to the menu.

View 2 Replies View Related

Ubuntu Installation :: VirtualBox Does Not See Attached Drives After Upgrade

May 3, 2011

Upgraded. VBox (Win7 - 64bit) runs well, but does not see attached drives. Removed the drives, and attempting to re-attach, usually results in an immediate Windows 7 crash. Even when attached (lucky) - the drives do not re-attach after a VBox reboot. Is there some easy way to downgrade to 10.10??

View 2 Replies View Related

Ubuntu Installation :: After Upgrade From 10.10 To 11.04 On VirtualBox - Can't Get To Desktop Or Terminal

May 12, 2011

When I fired up 10.10 this morning on VirtualBox as usual (running on Windows 7 machine), I got prompted to upgrade to Ubuntu 11.04 Natty Narwhal, so I followed the prompts and after about 4 hours or more, my vm restarted and says 11.04 is running, however, I never get to the Ubuntu desktop. Im stuck at some startup screen that shows the Ubuntu logo and I definitely cant see the System, Peferences, etc. menus at the top left.

One thing I came across is that 11.04 is designed for use with touch screen devices and 3D, and thus 3D acceleration is required in the VirtualBox settings, but even after checking that option and restarting I still couldnt get to the desktop.

Also, during the install I came to a step where I was prompted to discard files no longer needed at which point I agreed to have them deleted (41MB or so of files). Maybe I should have just kept everything.

Did I miss a step or is it not good practice to upgrade on a vm in this manner, meaning it's better to always download the .iso and do a fresh install?

View 2 Replies View Related

OpenSUSE Hardware :: Unable To Start VirtualBox Kernel Modules - Error Stopping VirtualBox Kernel Modules

Mar 23, 2011

I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:

/etc/init.d/vboxdrv setup. I get this error:

[code]...

When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?

View 5 Replies View Related

Ubuntu :: Virtualbox PUEL Lost USB Connectivity After Upgrade To Karmic?

Jan 14, 2010

I am using the VirtualBox PUEL version, and I used to run Windows + the driver program of my Lexmark USB scanner - successfully. Now I have upgraded to Karmic, and when I try to attach the virtual machine to the USB scanner I see its line (and all other lines) greyed out, see the screenshot below:

Thus I have lost USB connectivity after upgrade to Karmic. Also in the yellow status box "Unavailable" appears. how to use my scanner and other USB devices again?

View 9 Replies View Related

Ubuntu Installation :: VirtualBox - Kernel Driver Not Installed After Upgrade To Lucid?

May 4, 2010

I upgraded to Lucid last night, and I'm getting this error when I try to run virtualbox-ose:

Quote:
Kernel driver not installed (rc=-190 Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root.
I try it, then I get:
Quote:
modprobe vboxdrv
FATAL: Module vboxdrv not found.

I have no idea what's going on. Can anyone help? The version of virtualbox is 3.1.6-dfsg-2ubuntu2

View 9 Replies View Related

Debian :: Virtualbox-ose Is Not Working In Squeeze?

Mar 9, 2011

If I recall correctly, my Squeeze desktop is working whereas my Squeeze laptop isn't.

Here are the errors: Failed to open a session for the virtual machine Ubuntu 10.04.2. The virtual machine 'Ubuntu 10.04.2' has terminated unexpectedly during startup with exit code 1.

Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine

[Code]....

View 2 Replies View Related

Fedora :: VirtualBox GUI Has Stopped Working?

Feb 26, 2011

I migrated a few VirtualBox vdi's to a new laptop. My Windows XP and 7 virtual hard drives imported nicely when I created and started the guests; however, Fedora bombs as soon as the boot progress bar completes. I get this error message: VirtualBox GUI has stopped working.

View 2 Replies View Related

Ubuntu :: USB Items Are Not Working In Virtualbox?

May 30, 2010

So I have virtualbox with a fresh install of Windows XP running in it (no service packs) and when I plug in a USB Item it shows up on the device list and it is not greyed out, but nothing happens I cannot access the device through windows XP. It was greyed out before but then I logged in as root and started virtual box and it is not greyed out anymore but nothing happens when I plug in a USB item.

View 5 Replies View Related

Ubuntu :: Virtualbox-ose Not Working After Update

Jun 15, 2010

recently i updated to a kernel version 2.6.31-22-generic and now I cannot start my virtual machines from virtualbox-ose.

View 3 Replies View Related

Debian :: VirtualBox Not Running - Browsers Not Working

Jun 11, 2011

First I wanted to install the proprietary software Virtualbox-PURE cuz there is usb support, I need.

Added the Repository and installed it (virtualbox-4.0) and dkms.
Here is my sources.list
$ cat /etc/apt/sources.list
# Debian Hauptrepos
deb [URL] squeeze main contrib non-free

# Debian Update-Repos
deb [URL] main contrib non-free .....

The result of all is:
virtualbox is still not running. I use experimental branch flash is not working now. flashplugin was installed, I restarted my browsers, not working. I tested it with opera, chromium and iceweasel.

My questions are:
How I ever can go back to stable?
How can I make virtualbox run?
How can I make flash run?

I'm using debian squeeze with gnome 2.30.5. When you need more infos or results of commands I give it to you. 2 days of work and nothing is running.

View 8 Replies View Related

Networking :: Ssh Isn't Working For Some Domains (VPN), But Virtualbox Can Connect?

Jan 4, 2011

As of yesterday I have this perculiar problem. When I try to ssh into my account I have on a linux server where I keep some of my files (I'm using Cisco VPN) ssh claims it can't find the address.It's worked fine before, and if I connect using putty in Virtualbox on the same machine it works.The problem applies both to command line ssh and NetBeans (which uses a java client).I've tried setting SSH not to resolve DNS in the config file but it doesn't help.

View 3 Replies View Related

Fedora Installation :: Wine And Virtualbox Not Working After Bug Update?

Mar 25, 2009

i always run updates if i get prompted about it... this time i ran a couple or so updates and software updates and restarted, i realise my VirtualBox and Wine isn't running at all... i click on the icons but nothing fires up.. all my programs on Wine seem to fall under the same issue...

how do i view all the latest updates i just installed?

View 5 Replies View Related

Fedora :: Virtual Machine Manager And Virtualbox Not Working

Jun 18, 2010

i want to run winxp really bad in virtual machine, but have yet to get the programs to open without error.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved