OpenSUSE :: Sound Turns Automatically On While Starting The Pc?
Mar 8, 2010
i run opensuse 11.2 with kdebase4-4.3.5-0.1.1.x86_64 on a hp elitebook 8530w. when i start opensuse and the sound is initially turned off, it will be turned on while starting. if i turn it of manually (by pushing the appropriate button) it will be turned on again. I assume that there is a script like .bashrc for bash scripts which tells the system to turn on the sound. Does anyone knows whether there is such a script and if yes, where can i find it and edit it?
I have fresh installation of Ubuntu server upgraded with apt-get dist-upgrade and with XFCE4 installed on my notebook. The problem is whenever I type startxfc, startx or X, the NTB freezes, CRT display connected to docking station/port replicator turns off, LCD in NTB gets black. The system does not respong to any signal, even the alt+sysrq ones. If I even install Xubuntu-desktop, as the X gets loaded every start, system everytime hangs after few seconds and I cannot do anything. Now I reinstalled and tried autoconfiguration with Xorg -configure. If I start the X with this configuration file, the result is still the same. Log at /var/log/X11/ seems to be blank.
Any ideas? Should i try to get drivers for my video card? I thought this is not necessary, the X server should start without anything, even only with basic resolution settings. As I looked, the video card chipset (Intel 82852/82855) is detected in my /root/xorg.conf.new file.
I have 2 computers, one running Ubuntu 9.10. I don't often use this one and rather than turning on the power point & having the computer automatically comen, as my Windows machine does, you had to press the power button to switch it on.As of yesterday - after not using it for some time - it turned itself on when I turned the main power point at the wall on to use my other computer. Thought maybe the button was knocked, but this has happened twice since. Seems it's mysteriously changed to automatic start up I can't work out how to change this. Can someone tell me what settings need to bechanged to have it not turn itself on until asked, please?
Running openSuse 11.2-64 on a DualCore / 2Gb machine.I have 3 nfs shares described in my /etc/fstabAll three were mounted at boot time when I was connecting to the network through the wired interface (eth0).I need to use the wireless interface, and even if that interface is up and running well (I use ifup), the nfs client doesn't start... if just after boot I do a mount -a or simply a nfs start, everything comes up and runs well.This machine will not be used by myself, and the users cannot just jump into a command line and type nfs start or even mount -a (they would need su privileges...)I have disabled the eth0, killed the eth0 config (with yast) edited /etc/sysconfig/nfs and setted the NFS_START_SERVICE to yes to force the gssd and idmapd to always start even if there was no nfs entry in fstab, but nothing changed.
kde knetworkmanager is not starting on startup.i am starting this manually every time on login to connect to network..how to make it start automatically?
The sound stopped working on my Macbook Pro 1,1. It was working fine before, and I can't think of any changes I made that would make it stop working. I know it's not a hardware problem because the Apple sound plays when I turn on the computer. Everything is unmuted in ALSA Mixer. None of the hardware options in Sound Preferences produce sound. Plugging in headphones or speakers does not solve the problem. I'm using 10.10.One curiosity: Whenever I do something that would normally cause sound to play, the optical audio red light in the headphone jack turns on, but no sound plays.
I'm trying to install OpenSuse 11.3, everything went fine untill last step : configuring hardware. So my install hangs up at the point "starting sound card" (well it is in french, but it should be this translation in english). My sound card is a classical realtek hd audio card (from a laptop toshiba x200). In the terminal(/dev/tty1) I can see that it is hanging at Starting Yast2. I had no pb with my previous installs regarding the sound card (with openSuse 11.2 and earlier). what to do to have this step working, or at least have the sound card not started at this point.
my sound has been only turning on if i turn it up beyond about 10%. it didnt used to do this. This has been happening for quite a long time, i just now wanted to bring it to the forum.
suspend has always worked fine with 11.04 and now it stopped working a few days ago. How can I figure out what is going on? The display turns off but the computer never turns off and the only way to bring it back is to hold the power button down and then start it back up.
I set up 11.4 in my laptopnd, after updating and downloading the proper firmwareeverytihing runs great. I already configured the wireless network via the standard NetworkManager but the connection never starts automatically. When I boot up it reports all the wireless connections available and also let me connect to hidden networks (mine is not broadcasting so I have to use this option). I had to reconfigure my network options the first time I selected Hidden Networks but it connects fine. Please note I had already selected the "Automatic connection" optionSo the only question is how I configure my equipment so it connects automatically to the already configured network
As you know,whenever user turns the PC on,a beep sound is heard,then the bios starts,but recently this beep sound doesn,t come out of the case,and,so the bios does not start(nothing seen on the screen),then i have to hard reboot several times,and mostly,i have to shut down for some seconds to remove this problem,also sometimes this beep sound comes out but repeatedly for many times.
I am suspicious about the shut down button,because it,s a long time that this button usually is blinking.
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated. 21:24:04.868 Statistics reset. 21:24:04.886 ALSA connection change. Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
played around with Plymouth Manager yesterday, and today, my system would not start. I got some help from #ubuntu, and to my surprise, startx ran without problems. sudo service gdm start also worked perfectly. However, when I boot up my computer, I am always taken to the recovery screen. How can I stop this from happening, get my boot screen back, and make everything work as it should?I'm on Ubuntu 10.10 32-bit with an nVidia GeForce 8800 GT and version current on the nVidia restricted drivers.
and i have to type bash everytime to get it running. i found a bandaid fix by having it type bash at the "custom command" profile preference... but i still consider the problem to be unsolved, because i still have to manually type 'bash' whenever i log remotely (putty). it seems like something happened, and now bash is not loaded by the terminal by default like it should.
PS: i already tried 'cp /etc/skel/.bashrc ~./bashrc', and it didn't seem to do anything.
I am using Ubuntu 9.10, fairly fresh install. Had one hard reset since I installed it, which could be when the problem started. Also, I was messing a bit with profiles, switching their ID's and adding/deleting them (not sure if that would be the problem).
I just installed VNCServer on my Ubuntu box. I've tested the connection on my Windows box and connect fine.If I were to restart Ubuntu, would the VNCServer start automatically? If not, how would I do this?
I'm moving a homebrew arcade cabinet I have in my sitting room over from Gentoo to Ubuntu. Gentoo's served me well for a couple of years, but it refuses to recognise a touchscreen I recently installed on the cab, so I thought I'd give Ubuntu a try.
There is very little space on the SATA DOM inside the board in the cab, so I try and put as little OS on there as possible. To that end, I installed the minimal iso, and then apt-got X. I manually configured xorg.conf to make both monitors attached to the cab work, and I can enter X fine from the command line.
But what I need to do is have X start on powerup and automatically run my game. In Gentoo this is as simple as putting "xinit [GAME]" into /etc/init.d/local.start (the equivalent of rc.local). No login required, the prompt didn't even come up until I'd exited the game.
However, if I try and do this in Ubuntu, X can't find any devices, even though rc.local is at position 99. I've tried putting the lines in rc.local as well as manually update-rc.d-ing my own files, but no luck. X refuses to start until after the login.
So what seem to need is some way of automatically logging in as root on the command line, starting X, then running my game.
I recently upgraded to zenwalk 6.2 and xscreensaver now starts automatically so i have to input my password whenever i shut and reopen my laptop lid. how can i stop it from auto-starting.
I have a couple apps that I cannot figure out how to prevent them from starting automatically upon logging in. They are NOT listed in my Startup Applications under preferences. For example, pidgin. Pidgin automatically starts at each login even though it is not in the startup apps nor can I find an option in pidgin itself. Tomboy is another. I always get an error that tomboy cannot be added to my panel when I restart. The error in the tomboy panel log is that tomboy is already running. Does ubuntu have a hidden "start up" folder like Windows does in the start menu? Where can I clear this file/folder?
Anyone know how to stop the pureftpd starting up automatically? I've tried the usual in /etc/init.d/pureftpd but it still starts and I need to log in and close it in the admin UI or in terminal.
I have posted this somewhere here before and solved it but can't seem to find it. Just waisted 50 minutes googling and checking man pages for upstart. By the way; are man pages written by someone using their tows to type and getting beaten by a stick for every character they type? It seems missing a lot of info. Anyway, I know smbd is started with /etc/init/smbd.conf and there is a line like:
Code: start on local-filesystems Now it needs to be started on? (manually) I can't seem to find any useful information but did seem to find the upstart man pages a hundred times or so (same info same missing parts). I would love to get involved writing documentation for these things if only I know what I was doing.
A server like Lighttpd or Apache starts automatically at boot after you install it. How do I stop it from auto starting? I'd prefer to manually start it when I need it.
I am loading the file in Fortran. File looks something like this (shown below) I am interested in Velocity values and not Pressure values. Is there a way to code in Fortran which finds the staring LINE of Velocity values and ending LINE of values or I have to manually find the lines? IN this case it should return Starting line : 9 Ending line: 11
I have just upgraded from OpenSUSE 11.3 to 11.4, and now regularly about every 15 minutes my monitor display goes blank for a split second. My video chip is NVIDIA GeForce 6100.
I have a fresh install of openSuse 11.3 installed. But after the install the auto reboot nothing happens screen turns off, I restart comp grub came up. OpenSuse (Default) Failsafe openSuse Windows 7
I select default the little gecko loading screen comes up then after 15sec screen goes black screen actually goes into idle mode, button pressing mouse moving nothing effects it. I reboot again select failsafe, text screen comes up going through list everything green, then screen turns black doesn't go into standby just black screen. I reboot try default with nomodeset loading runs same as failsafe except when comes to x-server screen goes black.
I have 2 displays a 18" Dell digital lcd Monitor, and my 26" TFT TV, They are both connected to a Gigabyte Nvidia GeForce 8400 GS, TV with HDMI and Monitor with DVI-I. I have a second 18" Dell LCD Monitor, which I had connected with D-Sub but I couldn't get all 3 working so disconnected second monitor, as i wanted tv over monitor. I had ubuntu 10.10 running before the opensuse 11.3 install it worked fine but i wanted to try suse.
I thought it might have been that I was picking KDE desktop then adding Gnome later in installation, so tried reinstalling default install same problem, tried gnome alone same issue, tried gnome and KDE and same issue. so i put original idea back on KDE and gnome later in install. and im sticking with this until I fix as its the one I want. But if I really have to I will switch back to ubuntu. I have no Linux experience.
I have an issue running the openSUSE 11.2 liveCD KDE on a Dell Vostro 3500. It boots fine to command line. It seems to boot fine to KDE (I assume it doesn't hang cause the power button turns the laptop off without holding it). However the only thing I can see is a black screen. I've checked the CD with the tool included to the CD. The hardware of the laptop seems to be fine as well
