OpenSUSE Wireless :: Wireless Connection Not Starting Automatically?
Apr 7, 2011
I set up 11.4 in my laptopnd, after updating and downloading the proper firmwareeverytihing runs great. I already configured the wireless network via the standard NetworkManager but the connection never starts automatically. When I boot up it reports all the wireless connections available and also let me connect to hidden networks (mine is not broadcasting so I have to use this option). I had to reconfigure my network options the first time I selected Hidden Networks but it connects fine. Please note I had already selected the "Automatic connection" optionSo the only question is how I configure my equipment so it connects automatically to the already configured network
View 3 Replies
ADVERTISEMENT
Apr 17, 2010
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
View 2 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Jun 28, 2011
I need help configuring to set my wireless to connect automatically on boot up. Right now I do have wallet on with a password.
View 1 Replies
View Related
Feb 27, 2011
I recently set up a new desktop with openSUSE 11.3 64-bit GNOME, and I'm having some trouble getting the wireless to behave.I'm using a D-Link wireless USB, which uses a Ralink chipset. According to dmesg, the firmware is rt2870.bin.I can connect to the network, but it automatically disconnects after a while.
View 6 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Apr 27, 2010
I recently bought a D-Link DIR-655 router capable of 802.11n operation, upgrading from a DIR-624 router only capable of 802.11g operation. While my overall setup uses wired connections, other people in the house prefer wireless, and the upgrade was undertaken more for a hoped for increase in wireless range, rather than the possibility of increased speed, since the router is located to accommodate the wired connections. However, to test the 802.11n operation I bought a D-Link DWA-130 USB dongle for my now 5-year old laptop, which comes with an otherwise satisfactory 100Mbs ethernet port(eth1) and an 802.11g wireless card(eth0). By checking the dmesg | grep firmware output after I plugged in the dongle I determined that the necessary firmware was rtl8192sfw.bin, which I found on the web, and downloaded into the directory /lib/RTL8192SU.
A subsequent reboot and then YaST > Network Devices > Network Settings showed the device as wlan0, but not configured. I changed the Network Setup Method to ifup (since I can see no way to do a device configuration in Network Manager), and configured the device, and at the same time deleted the configuration for the existing 802.11g wireless card(eth0). I then rebooted, went back into YaST to confirm the wlan0 device was configured and the 802.11g device (eth0) was not, changed the Network Setup Method back to Network Manager, rebooted again. Making sure that the router was set to only transmit/receive using 802.11n I then typed iwlist scan. To my surprise, the output showed first that the supposedly unconfigured eth0 device seemed to be still active, for it found my home network, and claimed that the protocol used was 802.11g. On the other hand, the newly configured wlan0 device produced the message: "Interface doesn't support scanning: Network is down".
First, should I expect iwlist scan to work for a device that shows as unconfigured? And even if it should work, shouldn't it show 802.11n as the protocol, assuming that the router is in fact telling the truth? Is there any independent means to determine if the router is only using 802.11n as it claims? Second, the overall goal is to make the wireless network in the house 802,11n only, and since the dongle is backward compatible with 802.11g, I would expect to permanently unconfigure the eth0 device and use the dongle, both here and on the road. I do not need two wireless connections on my laptopThe laptop is running SuSE 11.2 as of about a month ago. Some relevant(I hope) command line output:siracusa:~ # uname -aLinux siracusa 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/LinuxUSB Information
siracusa:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2001:3301 D-Link Corp. [hex]
[code]....
View 9 Replies
View Related
Sep 13, 2010
I just started using OpenSUSE on an old laptop. It seems that I have my graphical problems at least temporarily solved, but I continued to lose my wireless connection after an hour of use. This is an old and well supported chipset (RT2500) and I had never had any issues with it before. I use WPA security, and one kind poster suggested I had a line for using the old "wext" driver in the /etc/sysconfig/ifcfg-wlan0 file, and that seems to have sorted it since I have not had any further issues since doing that edit. I eventually found the information on my own:
# Note: This option requires a wpa driver supporting it, like
# the 'nl80211' driver used by default since openSUSE 11.3.
# When you notice problems with your hardware, please file a
[code]....
View 9 Replies
View Related
Oct 10, 2010
I installed ubuntu 10.10 and it is not automatically detecting the wireless connection and showing message firmware missing. how to connect to wireless. I installed on the laptop.
View 6 Replies
View Related
Nov 15, 2010
There seem to be a number of people that believe the junk that NetworkManager is buggy.As I believe the opposite, I want to offer more detailed instructions on how to create the initial connection, and how to troubleshoot the process. Once readers of this group have commented on this draft, I plan to ask the moderators to make it a sticky.
This description will be specific to the KDE desktop. The steps will be similar for Gnome, but the details may be different.
Step 1: Do you have a Network Manager applet in the system tray? If not, use YaST =>
Network Devices => Network Settings. Under the "Global Options" tab, click on the "User Controlled with Network Manager" button. If it is already set, you will get a warning box when "Network Settings" starts.
Step 2: Now you should see the NM applet. Click on it and check the popup. If the "Enable Wireless" checkbox is inactive (gray), there are several possibilities: (1) Your wireless device driver is not loaded, (2) the necessary firmware is not available, or (3) an rfkill switch/button is wrong. For (1), check "hwinfo --network" and check the "Driver" line. If it is blank, then you need to run the command "/sbin/lspci -nn" if the device is connected to a PCI bus, or "lsusb" if a USB device. Post the results on the Wireless forum. For (2), look at the output of "dmesg | grep firmware", which will list the name of the file(s) to be loaded.
For Broadcom devices that use either b43 or b43legacy, the firmware is obtained by using the command "/usr/sbin/install_b43xx_firmware". You will need a wired connection to complete this step. For (3), you will also need a wired connection and install the
"rfkill" package using the command "sudo zypper in rfkill". The interrogate the current settings with "/usr/sbin/rfkill list". If any device is "Hard blocked", then wireless will be disabled.
Step 3: Once the "Enable Wireless" checkbox is active, check it and click on "Manage
Connections". Choose the Wireless tab and click on Add. Enter the name for this connection. You will probably want to check the "Connect Automatically" box. Next click on the Scan button. If you do not see your Access Point (AP) in the map, you will not be able to get a connection. Click on the AP you want, and click OK. The (E)SSID should be in the SSID box. The other boxes on this screen should be OK as is. If you have several APs with the same SSID, but you wish to restrict the connection to only one of them, then you should enter its MAC address in the BSSID box.
This usage is rare. Next click on the "Wireless Security" tab and enter any encryption secrets. The correct type should have been selected. For WEP encryption, you will need to use the hex key, not a passphrase. Once this is complete, click OK to close this screen, and the configure screen. During this process, a popup should appear offering to use a
wallet to store the connection secret. If you use a password on this wallet, you will need to enter that password each time you log in. If you set no password on the wallet, the security level is lowered, but entering a password is avoided.
Step 4: At this point, you will need to disconnect the wire. Whenever the computer can make a hard-wired connection, it will supersede any wireless option. The wireless connection should then occur automatically.
View 1 Replies
View Related
May 6, 2011
I've been having problems with connecting to my router with my wireless card. Sometimes knetworkmanager attempts to the connect to my wireless via it's saved profile but it just stays on "Activating" for about 45 seconds then just stops. This only started happening a few days ago, so maybe the new kernel update has something to do with it?
I've tried to debugging the problem myself and have found if I reboot my router knetworkmanager can connect immediately to the wireless router, but also something interesting I found was is I assigned a IP Address and DNS manually on the saved profile it would connect with no problem (No reboot of router required), so it is indicating there is a problem with getting network settings. I've confirmed that the wireless card is not hard or soft blocked through rfkill.
I was using the box standard ath5k driver when this problem started happening and even went as far as a complete reinstall but ironically enough on first boot from a fresh install my wireless could not connect with the problem described above. I've since moved to the compat-wireless drivers but the problem remains.
I checked a couple of logs, one log file of significance was the wpa_suppliment log which was full of these messages: From all my debugging I can only assume that the kernel update is a possible cause for all of this as the problem occurring on first boot of a fresh install sounds like a general bug. I've got all of the requested information about my wireless card below, hope I've got everything:
[Code]....
View 2 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Jun 3, 2010
Some info below:
- notebook Fuijtsu Siemens AMILO Pro2065 - 4 gb ram - 80 gb hd - wireless on board Intel PRO/Wireless 2200BG
- wireless works properly with Ubuntu (with WEP key)
I'm just installed OpenSuse 11.2 and:
- wireless found my AP
- i've just inserted WEP key / 64 bit Hex-Ascii and..not working!
View 1 Replies
View Related
Dec 9, 2009
I have upgraded to KDE 4.3.4. Network manager now works but whenever I reboot or tun the computer on I have to start it manually. I have added it in "system settings > autostart", but it has made no difference.
View 9 Replies
View Related
Apr 9, 2011
Just moved over to openSUSE 11.4 (KDE) from Ubuntu, yesterday. However, I'm having some trouble with my wireless connection.
I have a wireless network with a hidden SSID and WPA2-PSK security. I entered all the nescery information into the KDE network manager, but it couldn't find my network. So I ran the usual command:
Code:
su -c iwlist wlan0 scanning essid [My SSID]
At which point, the network manager immediately found, and connected to, the network. However, it seems that I have to run this command (as root) each time I log in, before my laptop will connect to the network. The network manager has no problem find the plethora of unsecured networks as well as those that are secure, but broadcast their SSID.
View 1 Replies
View Related
Feb 13, 2010
I managed to get recognized my Trendnet TEW-424UB wireless USB adaptor with ndiswrapper. Now I have the configuration problem. When I try to do the configuration in Yast, in network devices -> network settings and I save I get a message that I must install the "iw" package. Because the computer is quite far from wired networks I can't get it on Internet to download the package automatically. So, I want to ask if it's possible to install this package off-line because I can't find it by searching on OpenSUSE website.
On this computer I use OpenSUSE 11.2 32-bit with KDE. I put some commands if someone wants to know how I manage to get this USB WiFi adaptor to work (with the Windows XP driver sis163u verison 5.1.1039.1050):
Code:
robert@VL420:~> /usr/sbin/ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
sis163u : driver installed
device (0457:0163) present
robert@VL420:~> lsusb
[Code]...
View 7 Replies
View Related
Feb 16, 2010
I have to manually connect to the internet (e.g. "activate"). How can I make the OS connect to the internet automatically?
View 2 Replies
View Related
Oct 5, 2010
I just reinstalled OpenSUSE 11.3 GENOME on my computer (Compaq Armada E500 w/512 MB RAM, 30GB HD, and Linksys WPG54v2 wireless card). After futzing around for several hours on two different evenings, I got it working all by myself! The only thing is,ow I have to manually connect to my wireless network every time,which gives me a a great sense of accomplishment. I start the computermber having to edit a script somewhere to make it connect automatically on system startup, but I can't remember what it is I'm supposed to edit or how I'm supposed to edit it
View 9 Replies
View Related
Jul 24, 2011
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
View 9 Replies
View Related
Apr 1, 2010
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
View 9 Replies
View Related
Sep 6, 2010
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
View 2 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Mar 21, 2011
Using tips provided in the "Sticky" posts, I have identified my wireless device -- BCM4322 -- and installed the necessary firmware and drivers. The device appears in Network Manager until system reboot, at which time the "ssd" driver module is loaded instead. After each boot I must execute the following commands to remove ssd and load the Broadcom driver:
rmmod ssb
modprobe lib80211
modprobe wl
The Broadcom README file provides directions to load the correct module automatically, but the commands appear to be incompatible with openSUSE 11.4. I'm happy to provide additional detail if needed
View 7 Replies
View Related
Apr 30, 2010
I'm trying to set up a wireless connection to my personal wireless net. I have a Linksys N router and I am using a WMN 300n adapter. I found out how to get the connection manager but I'm not sure if i ams upposed to enter the MAC of the router and I know what the SSID is but the B**ssid(not quite sure what that was and I'm on a Win7 system right now)so any info to get my wireless connection now
View 5 Replies
View Related
Feb 14, 2011
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
View 1 Replies
View Related
Apr 18, 2010
I was with SuSe linux time before it became part of Novell. Of course many of my hardware did not work at that time. But the large repository on installation disc attracted me to SuSE. I have been with other version of linux for last few years. With the release of SuSE 11.2, i thought i would just give it a try. I like what i see and would very much like to make a comeback. Except, my wireless usb stick is not working.I got Asus USB-N13 wireless stick. I tried all the article i found how to install wireless card using ndiswrapper or without, but sadly its still not working.
View 1 Replies
View Related
Feb 28, 2011
I have a problem getting a wireless connection to appear on OpenSUSE 11.3. I think it's because I don't have the drivers. I used to use Ubuntu, where the drivers just had their own menu, but I'm lost with OpenSUSE. I was told to post the output of dmesg | egrep "ssb|b43" and here it is:
[Code]...
View 1 Replies
View Related
Dec 18, 2009
I've got an old Compaq Armada E500 laptop (850mhz PIII, 512mb RAM, 30GB HD) that I've been running OpenSUSE 11.1 w/Gnome desktop. My wireless adapter (Linksys Wireless-G, model WPC54G ver. 2 w/acx-111 chipset) worked well with this setup, but no that I've upgraded to OpenSUSE 11.2 w/KDE, I've got to start all over. I tried doing what I did before, which was to copy the firmware file into /lib/firmware.
View 9 Replies
View Related
