OpenSUSE :: Yast Automatic Backup Not Working?
Jun 9, 2010
I created a profile for Yast Backup and successfully executed it manually. However, when I set up the Automatic Backup with the same profile it doesn't work. It will start at the scheduled time and do the "search" part of it but it hangs before it creates the archive. These two processes (backup_cron & y2base) remains running and never terminates.
Here are the last few lines in the Yast log before it hangs:
Code:
2010-06-09 20:08:05 <1> londy(1957) [YCP] backup/ui.ycp:2037 subprocess started: true (PID: 1958)
2010-06-09 20:08:05 <1> londy(1957) [YCP] backup/ui.ycp:1827 Reading installed packages
2010-06-09 20:08:18 <1> londy(1957) [YCP] backup/ui.ycp:1735 Number of installed packages: 1281
2010-06-09 20:09:17 <1> londy(1957) [YCP] backup/ui.ycp:1842 Searching in packages started
[Code]....
View 2 Replies
ADVERTISEMENT
Apr 8, 2010
I bought a new HP printer and had to install the latest HPLIP version. I had to compile it and install it from source. In order to avoid interferences with the installed version, I had first removed the installed version. But now Yast wants to re-install this old version with any package installation or upgrade because it sees unresolved dependencies. How can I stop it to add this packages? Or how can I tell Yast that the hplip packages are installed?
View 3 Replies
View Related
May 21, 2011
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
View 4 Replies
View Related
Mar 8, 2011
When i create a backup with yast using the option to manually create it, i select the file name /mnt/Backup/system-full-$(date +%F).tar which results later on in two files, the xml file and the tar file with different names:
for example
/mnt/Backup/system-full-2011-03-08.tar, /mnt/Backup/system-full-$(date +%F).xml
this is not acceptable. both files should have the same suffix. Is this the expected behavior or should i report a bug?
View 6 Replies
View Related
Jul 16, 2010
I report this issue since RC1 but the problem left unsolved .
I unable to start vsftp from yast .
View 1 Replies
View Related
Dec 23, 2009
I enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies
View Related
May 12, 2011
After installing opensuse 11.4, the kmail program does not automatically check spelling. It worked perfectly in 11.3. Kmail is now 1.13.6. I click Settings > Spellchecker, and it has checked automatic spell checking enabled by default. I click on ok, and the spell checker starts working for a little while. If I click Tools > Spelling it brings up the spell checker box, and that works perfectly. But then, when it's finished, the automatic spell checking is turned off again? There are times when even Settings > Spellchecker will not turn on automatic checking. I haven't figured out yet what triggers the complete failure. What can I do to make it do automatic spell checking when composer starts, without having to remember to click anything? And so that it stays on always?
View 2 Replies
View Related
Feb 8, 2016
Like topic, I want to create a weekly backup of some folder to anoter partition (or external usb), compressed or not (folder also of 20/30 gb), with only root permission on file (or folder) created..This system, where I have installed debian jessie, is always on being used like a NAS..
View 1 Replies
View Related
Jul 18, 2011
I am trying to find a backup program to incrementally backup some files to an external disk every week for example. I would prefer not to have to write a script as I am not really used to it.
View 4 Replies
View Related
Jun 20, 2011
i am not familialized with Linux i installed recently a TACACS+ server under CentOS 5.5 and it is working well but my boss asked me to make a weekly backup of the tacacs.log file to check who was connected at any time the problem is that i don't know how tp make this backup and how to make it automatic and also he asked me to change the default port of tacacs from 49 to another port does someone knows how to make it?
View 1 Replies
View Related
Apr 14, 2010
Linux/Ubuntu noob here so please be gentle So I own an Ubuntu server (7.10 - "gutsy") which was previously used for my small business. All setup and maintenance of this server was done by an admin who has since moved on and I can't get in touch with.As part of the setup, this admin has somehow setup the server such that whenever I plug in an external HDD (USB) it automatically runs a backup script which copies over a whole bunch of stuff to this drive.I want to cancel/delete this script as this is no longer necessary. Can anyone give me any pointers as to how I could track down where this script is and how to remove it?
View 2 Replies
View Related
Sep 10, 2010
I wonder if anyone knows of a cross platform sync/backup utility that can do the following:
Incremental backups Revisioned backup (possibility to not just restore the latest but to go back to a specific point in time) Two way sync. E.g. two computers sync to the same server and the server also pushes changes to the clients (well I suppose it might be possible to solve it by restoring the latest backup also)
Cross platform: Linux, Windows & Mac (the server side may be Linux only)
Basically I want a revisioned version of Unison or a local version of Dropbox with support for custom folders. Depending on how you see it.
I'm not afraid to script things together if no pre-built solution exists but there are tools that when combined might do this. However it must be possible to automate, this comes from the fact that I want to be able to schedule it so it performs automatically. (If there is a way to push changes to the computers, like Dropbox, that's a plus but not a requirement.) This also means that a command line utility might be preferable over a GUI-only one.
View 1 Replies
View Related
Feb 2, 2010
I have been looking around online and I am seeing that there are several solutions for doing a nightly automated backup on Linux. I was wondering what people here actually use for doing such and why they use one particular backup method over another.
What I am looking to do is every night (at say 3am) I want my system to backup my 200gig Documents folder to my external hard drive. Does Ubuntu have a tool built in by default to do this or do I need to add something from the repos/online?
View 1 Replies
View Related
Aug 6, 2010
Currently, I would like to setup an automatic backup system, where the data on my computer is copied to an external harddisk which is connected to the router (Siemens SE551). This device theoretically allows setting up a file server, but unfortunately I can't access the share from Linux. I have not yet tried to access this share from Windows.
The rough plan is to use rsync and ssh, issued by a cronjob on both, my Ubuntu- and on my WinXP-notebook. But before considering this, I have to get my system connected with this drive.
BTW: I am using Ubuntu 10.4.
According to the SE551 manual [URL], NAS is not provided.
I followed this manual and set security OFF. According to the router's web interface, the device was recognized correctly.
I installed samba:
Code:
gedit /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code]....
View 5 Replies
View Related
Apr 3, 2011
I'm trying to use automatic login with sudo like this:
But in both case I'm getting the same error:
My linux version:
My sudo version:
My terminal settings:
View 2 Replies
View Related
Apr 19, 2011
I just purchased a router that supports IPv6 and configured my eth0 to use IPv6. I have tried automatic and automatic, address only with no results. My Windows 7 and OS X 10.6 boxes both work w/o issue of need to change settings. I have done a bit of Google searching, but not found much in the way of useful advice. Can someone point me to a good article or let me know that the product is broken at this point.
View 2 Replies
View Related
Aug 28, 2010
I'm trying to make my system automatically shutdown once the battery level is low, but still without success. I've tried kpowersave, gnome-power-manager, kpower, klaptop but none of these worked for me. Well, I can't imagine I would be that stupid, but simply it doesn't work. In all cases mentioned above (kpower, klaptop, gnome-power-manager) I've tried to setup the laptop to shutdown once the defined level is reached, but the laptop never actually switched off unless all the battery was drained.
Btw. I think all the above mentioned apps only work once the user is logged in. But I'd like the solution to work also when the PC is on without anyone logged in. I thought I could write a bash script based on parsing of acpitools output and define it as a service, which would monitor the battery level, but I simply don't believe there isn't any functional solution to this.
View 3 Replies
View Related
Dec 8, 2010
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
View 7 Replies
View Related
May 4, 2010
I'm an Ubuntu/Kubuntu user for a while now and i hav Kubuntu 9.10 with ubuntu-desktop installed.
I have two hard disks and i had one of the partitions mounted automatically while startup. I did that by reading the first method posted here
HTML Code: [URL]
It was working good till i did the distribution update to Kubuntu 10.04. After the upgrade while startup, a message is displayed on the screen saying
Quote:
"Disk to be mounted at /media/miscellaneous is not ready or is not there. Continue waiting or press S to skip mounting or M for manual recovery"
I dont know what to do. I have to skip and then mount the partition manually. I think the entry i added in
Quote:
/etc/fstab
is still there.
View 1 Replies
View Related
Jul 8, 2010
What does the red text in Yast mean? I installed a printer driver (Gutenprint 5.2.4) from here: software.opensuse.org: Download openSUSE 11.2) and when I view the installed packages in Yast, it shows up in red text. Why? (btw, that newer Gutenprint has the driver for my new Epson Artisan printer as well as my Samsung laser printer).
View 2 Replies
View Related
Jan 24, 2011
i want to install openmosix.
someone told me is easier to do it with yast.
exactly, where do i have to go in Yast in order to install openmosix?
View 9 Replies
View Related
May 22, 2011
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies
View Related
Oct 30, 2009
Using OpenSuse 11.2 RC2. After playing around to install the nvidia driver, Yast lost its beautiful initial colours (light blue, as the rest of the kde desktop) and became a bit uglier (dark blue, more rudimentary, etc; I think the default "unbranded KDE"'s colour).I have the KDE theme set either for the regular user and for root. I have also installed the packages yast2-theme-openSUSE and yast2-theme-openSUSE-Oxygen installed but, how shall I choose one of them?Some webs say that there is an option in Yast under "miscellaneous" to choose Yast's theme, but I do not have it.
View 5 Replies
View Related
Jan 21, 2010
I've installed OpenSUSE 11.2 and I'm pretty happy with over all system, the only issue that I had is with Yast, so far. It gives me alert for security patches but no alert for Software update. When I did "zypper up" as superuser I saw that there are updates available for more that 14 applications but yast didn't show me.
if there is any setting for it or should I file it as a bug.
View 9 Replies
View Related
Feb 24, 2010
From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
View 5 Replies
View Related
Mar 3, 2010
When I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh
It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.
View 1 Replies
View Related
Jun 10, 2010
Turned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.
Whatever I tried to download & install displays an error message
Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.
I'm running 11.2 64bit KDE 4.4.3
View 8 Replies
View Related
Jul 13, 2010
Yast-gtk sw manager - is there a way to reinstall an rpm? There is in the qt version but can't see how in gtk.
View 9 Replies
View Related
Aug 27, 2010
on opensuse 11.1, i was able to see my system logs using yast. but on opensuse 11.3 i'm not able to find it
View 9 Replies
View Related
Nov 18, 2010
How do I stop YaST from downloading the repodata every time I open the software manager?Even if I have opened it 5 minutes before, YaST still downloads the repomd.xml again.This is also a real pain if I am offline and trying to install an rpm, because I have to wait for it to realise that it can't access the data before it allows me to skip the auto-refresh.By the time that happens I could have installed the software already if I was using a debian or windows based system.
View 4 Replies
View Related
