OpenSUSE :: VBox + Suse X64 - Freezes During Auto Configuration
Feb 16, 2010
Has anyone successfully installed the x64 on VBox? Is there a different way to install the x64, because I don't think VBox can process this version. The few problems I have are:
1) it freezes during Auto Configuration.
2) freezes during boot initialization.
3) after reboot it keeps prompting me to complete a failed install, and doesn't matter if I accept to complete or not, I have the same problem.
4) freezes randomly executing system programs.
View 4 Replies
ADVERTISEMENT
Jul 11, 2011
I installed Suse 11.3 and it freezes randomly. No mouse control, keyboard. Sometimes the screen renders just the part of it, mostly top part of the screen and then freezes. I've gone through the /var/log/messages and I found this last line prior to restart (not sure if this is relevant) linux-fcvk kernel: [185.318403] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 1
View 5 Replies
View Related
Mar 2, 2010
I have installed opensuse on VirutalBox , during installation I said "yes" to autologin as normal user.After installation and restart , it shows follwing message "Logging in Laks ...Cannot enter home directory . using /"I can login as single user by passing "single " in grub.
View 9 Replies
View Related
Jul 6, 2009
Last friday I went home from work and just turned off my monitor, as a program I had written needed to run a durability test over the weekend. Unfortunately it seems that the moment I turned off my monitor, Linux just froze, quite evidently as it said this morning that the time was still Friday 17:13.
From the syslog I got the following on that time:
What this means and what I can do? It's not the first time it crashes as soon as I turn my monitor off.
View 3 Replies
View Related
Feb 13, 2010
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
View 9 Replies
View Related
Apr 7, 2010
Installed debian lenny one hour ago, and starte customising it for my needs.
i have a small problem after installing VirtualBox, after installation no shortcut icon is added .
I can use VBox from terminal, but wanted to ask what may br the problme.
View 4 Replies
View Related
Apr 15, 2011
im reinstalling 11.4 on my laptop and I can't seem to get past the automatic configuration. It installed perfect earlier, and I'm not sure its freezing this time.
View 9 Replies
View Related
Jun 3, 2010
I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
View 10 Replies
View Related
Apr 27, 2011
My new HP625 Laptop came with SLED11 preconfigured - including such special keys as the wireless/bluetooth key etc under gnome. I need a 64bit OS and 8Gb for my applications and the HP site does not offer any explicit support for 64bit Linux. So I installed SLED64bit on separate system partition and can select now 32 or 64 bit from GRUB. There remains the problem of configuring gnome (or KDE) on the 64bit system to take advantage of the keyboard, sound, cam etc. I did find a 64bit wireless driver in the i586-Repo on the HP-site that requires the kernel from opensuse 11.3 and I got bluetooth working with gnome but just for the keyboard alone, I am stuck with finding a decent configuration under 64bit. Is it possible to migrate the system wide gnome configuration from the SLED32 bit installation (as configured by HP) to any SuSEx86_64 system?
View 9 Replies
View Related
Jul 28, 2011
I was trying to automount a few NTFS partitions last night. Upon reboot, I got the following error messages.
/device/sda2 ... is not ready or present
/device/sdc2 ... is not ready or present
Then Ubuntu just freezes. I am using Ubuntu Natty, if that helps. I am currently unable to get into Ubuntu without a LiveCD.
View 1 Replies
View Related
Jun 30, 2011
I did it, I don't know exactly what I did, but OpenSuse 11.4 only boots to CLI when I fire it up using vbox 4.0.10. I was not able to attached a screenshot, I got an error saying that I did not have sufficient rights or something.
View 5 Replies
View Related
Aug 6, 2011
I have Vbox 4.0.4_OSE installed on my 11.4/KDE4.7 Laptop with Win7 and WinXP VMs installed. Generally runs well, although the Win7 VM seems to lock up on occasion if I ignore it for too long. Compared to having to reboot to Win7 to do the few things still stuck on Windoze, it is a GREAT solution.
Question: I have seen several forum items related to difficulty with dual boot systems and the installation of Win7SP1, regarding SP1s checking the MBR for the Win7 boot loader. Has anyone done a SP1 update to a VM on Vbox? It is sort of unclear what SP1 might see in the VM disk container associated with the VM. Since the initial load process for a new VM is time consuming, I thought I would ask first before blowing up my otherwise working Vbox system and then having to reload from scratch.
View 3 Replies
View Related
Jun 18, 2010
launching vBox lately pops-up this; but if I allow it to go ahead, I get this.. : the window has no end (!), no scroll bars nor any further info. If I first uninstall in Yast, will I lose all of my machines? Up until now these periodic updates have been a breeze, only sometimes needing a vbox setup afterwards to tweak the kernel
View 6 Replies
View Related
Nov 9, 2010
I have been trying to run my vmachines in virtualbox with no success so I decided to install upgraded packages for upgraded kernel, this means to install them from Virtualization-kernel-HEAD repo.The error is about that known issue where the kernel module can't start.
View 3 Replies
View Related
Dec 3, 2009
I logged on my ibm600e with SUSE 11.1 + on Thanksgiving and auto update started and is still running today 12/02/2009. Pentium cpu is at 77 to 97% 93% memory usage plus some swap usage. Ethernet and wireless are activeily working
also separately the CD ROM is not detecting/detected except by the hardware report I sent in. My external Zip100 Is visible. as is the plug in floppy drive
My linux is very limited
View 1 Replies
View Related
Aug 2, 2010
I installed recently opensuse 11.3 and then Virtualbox from Sun Webpage. I have a local printer connected to one of the usb ports. With 11.2, VBox saw perfectly that printer and I could connect normally to it. Now, VBox sees the printer: if I click on the usb icon in the status bar it appears, but dimmed, and I cannot connect to it. I tried to disconnect and reconnect the printer physically, but nothing changed.
View 6 Replies
View Related
Oct 21, 2010
I have downloaded vbox from its site and installed it. I created a vm but when I try to start it, I get error:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing:
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
And when I try 'sudo /etc/init.d/vboxdrv setup', I get:
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel modules done
Trying to register the VirtualBox kernel modules using DKMS failed
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules failed
(Look at /var/log/vbox-install.log to find out what went wrong)
And this is /var/log/vbox-install.log:
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
View 9 Replies
View Related
Jun 21, 2010
Trying to install OpenSuse 11.2 on a machine which has run version 10.3 for ages. I am installing to completely separate hard disk drives from the existing Suse. Installation is from a DVD burned from a successful download.
All goes well until suddenly the whole thing freezes, mouse as well. This has happened twice. The first time it stopped with 532 packages still to install. The second tim it had installed all packages, and the froze at
"Installing kernel module dependencies" 53 percent, and
"Save configuration" 90 percent.
Each time I was installing to a different, unused, hard disk.
View 6 Replies
View Related
Feb 22, 2010
I run openSUSE 11.2 on my notebook using VirtualBox 3.0.6_OSE r52128. Recently, I installed the guest additions on my Windows XP guest system (VBoxGuestAdditions_3.0.6.iso).
Before this installation I was able to use a screen resolution of 1024x768 in the guest system. Having installed the guest additions the best result I get is 800x600.
The resolution I'd like to get is 1280x800 which is the default setting of the host system. The graphic device used in my system is an Intel 965 GME/GLE.
View 8 Replies
View Related
Mar 25, 2010
I am running OpenSuse 11.2 64 - I have vmware Player and Vbox loaded and working fine - I have XP running in each VM - I have a Creative Live cam and was accessing it in each of the VM's, because I can't access it in Suse. This worked very well until recently. I received updates for Suse, one of which was a kernel update - I installed and rebooted. All of a sudden my time to boot took for ever - however - once up and running every thing seemed fine. After a few boots the system started booting normally and the video from my live cam in both VM's is garbled and and essentially not working right.
Video seems to work correctly in all other areas - I removed the creative software and reinstalled in each of my VM's No change. One last thing - I recently (a week or so before my problems) installed an Nvidia video card. I previously used on board video (also Nvidia) I had no problems either in the VM's or Suse until the kernel update. I have removed Vbox and reloaded and set it up (/etc/init.d/vboxdrv setup) problem still there.
My OS is:Linux 2.6.31.12-0.2-desktop x86_64
New Video is: G96[GeForce 9500 GT] Driver - nvidia
View 1 Replies
View Related
May 13, 2011
I've never got if, after enabling the 3d acceleration in virtualbox and installing the guest additions in safe mode, you still need to install the original drivers (catalyst in my case). Do know that by chance?
View 1 Replies
View Related
Jan 27, 2010
I have a dual boot set with XP Pro and 11.2 Is there a way to boot the already installed XP Pro as a guest in VBox? There are many occasions when I would like to jump into XP from 11.2 with the VM. Searches can't seem to find any link to this specifically but this may just be me and the terminology involved.
Found info on mounting an image here but not sure this is what I want.
HOWTO: Mount any VBox-compatible disk image on the host (View topic) - virtualbox.org
View 9 Replies
View Related
Jan 23, 2010
I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.
View 7 Replies
View Related
Jan 24, 2011
on startup/shutdown i get following message "vbox guest (something) failed
what does that mean ?
opensuse 11.3 gnome
View 3 Replies
View Related
Jun 19, 2010
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies
View Related
Aug 10, 2015
The apt-get autoremove command, I use Debian 8 for some time now and I often install a package, test it for some minutes and remove it then. I noticed that in most cases (if not all, I'm not completely sure) all the dependencies that were installed with the package (mostly libraries, of course) stay installed on the system when I remove the package.
And there is no output of apt-get that there are unnecessary pacakges which I can remove with apt-get autoremove. The autoremove command does nothing.Before I changed to Debian, I used Ubuntu and there all the dependencies are removed with apt-get autoremove when I uninstalled a package.My question is now, is this normal? if there are fundamental differences in which packages "autoremove" removes between Debian and Ubuntu?
View 4 Replies
View Related
Sep 28, 2015
I have a "time-server". It's sending time to different devices through different ports/protocols. The problem is that it has no operator and that makes some extra difficulties.
Now when i try to start it using terminal Code: Select allsudo ./myprogram works fine and
Code: Select all./myprogram doesn't work.
It is so because without sudo i have no access to ports. As a result If i add my program to System->Preferences->Startup Applications it has the same problem. So i need to start it as root, auto-start, right after auto-login to system but without entering password cause nobody will do it.
Also I need to start ntpd but it also asks password sometimes I've tried googles but it offer a few ways with entering password that isn't suitable for me or writing some scripts/changing system files but with no example I'm afraid to break it all. So is there a way to start Myprogram and NTPD as root with no password entering?
My system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686
View 12 Replies
View Related
Jun 18, 2010
I can use this at the end of bash_profile to autorun start x after logging on. code...
But what about to auto logout after killing the X session? I hit exit from fluxbox, but I could add a menu item I suppose to just kill the xsession. Wondering if there is a graceful way to do it with bash_profile.
Also, on a related note, if I switch to dash with the bash_profile method still work?
View 5 Replies
View Related
Nov 2, 2010
I need to configure xorg.conf or wherever that option is stored to stop Configuring my Desktop at a Huge Resolution i think it's Automatic one . I need to configure a static 800x600 screen resolution ,because @reboot every-time my Ubuntu 9.04 is switching it to a different one .
View 1 Replies
View Related
Jul 11, 2010
I just installed Linux for the first time and I'm having some internet connection issues. I am running Linux Mint 9 on my HP 210 netbook. I am unable to connect to anything using NetworkManager 0.8's automatic configuration. I can't even ping my other computer. Both computers are connected to my cable modem by a switch. The other computer (the one I'm on right now) is running Windows Vista and is working fine.
eth0 is getting an IPv6 address assigned to it, but no IPv4 address. When I do dhclient (I'll include it at the bottom) it says no DHCPOFFERS received and then makes another adapter called eth0:avahi with an IP of 169.254.9.78, which I think I understand from what I read is just a default.
I noticed when I looked at the ipconfig results from my Windows computer that there were a number of things called tunnels on there. My ISP is cox, and I saw some other people with cox had the same setup. One of the tunnels seems to make it so IPv4 and 6 can coexist. Could that be a problem? When I asked Cox why it was set up that way they helpfully referred me to wikipedia.
Here are my ipconfig (from windows), ifconfig, and dhclient results. Let me know if I can provide any other information.
Windows IP Configuration
Ethernet adapter Local Area Connection:
Tunnel adapter Local Area Connection* 6:
Tunnel adapter Local Area Connection* 7:
Tunnel adapter Local Area Connection* 12:
Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium.
All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
View 1 Replies
View Related
