OpenSUSE :: Stop Packagekit Update Applet Using Command Line?
Jun 22, 2011
I have a few PCs that are used by average joe's and whenever updates are available the update applet apears indicating there are updates. I usually update all these machines at the same time using zypper so in order to remove additional confusion how can I disable this? I've read in the forum how to stop it from starting up by going to Control Center | Startup Applications and unchecking Packagekit Update Applet. Is there a way to do this using the command line? I'm sure there is, after all this is Linux, I just need to know how. Reason being is I'll be ssh'ing into these machines to disable the update applet and don't want to touch all the machines and click my way to stop it at startup. Figure there has to be an easier way
View 9 Replies
ADVERTISEMENT
May 19, 2011
I add a "command line" or "mini-commander" applet to the panel in gnome, but nothing happens.
If I launch "/usr/lib/mini_commander_applet" on a terminal, I get a dozen such applets, for all the times I tried, but then I have an xterm tied up.
If I launch the same from "alt-f2" it does not work, and gives no error.
Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar)
View 9 Replies
View Related
Jul 10, 2011
How to stop/start KDE from the command line (Terminal) on opensuse 11.4?
View 9 Replies
View Related
Feb 4, 2011
when i try to update to kde 4.6.0 (in opensuse 11.2) i notice that it need packagekit 0.6.3 (while it have 0.5.1) how do solve this problem? i use this repo: [URL]
View 4 Replies
View Related
Mar 24, 2010
My kupdate-applet tells me it has a recommended update: KDE 4.3.5 from the official opensuse update repo. Problem is I already have a more recent version of KDE 4.3.5 installed from the official opensuse KDE repo. In yast I pressed the "switch system packages" button for the KDE repo. How can I make the update applet ignore this "recommended" update? Note that the updateApplet itself is installed from the opensuse update repo. If I don't do this, then the older update applet from the KDE repo always has a recommended update for... Kupdate-applet.
View 2 Replies
View Related
Feb 27, 2010
Getting "DBus error : Unable to get transaction id from packagekit." when trying to update. I can't update or install software through the package manager anymore. The yellow exclamation point won't go away on the toolbar.
View 8 Replies
View Related
May 30, 2010
I wanted to install TeamViewer (for Linux). I downloaded the RPM, but when I double-clicked on it to start the installation I got the following error: The name org.freedesktop.PackageKit was not provided by any .service files I Googled around for possible solutions but I couldn't find any. Does anyone know how to fix this error and install TeamViewer? I'm using openSUSE 11.2 with GNOME desktop.
View 1 Replies
View Related
Oct 12, 2010
I have a GUI for Samba already as it most likely installed, the problem is I don't have a shared folder in admin menu. I have told samba what folder to share and what user to have access to it. As well I have looked at the config file to make sure what was in the gui printed into the config file. However I cannot start, stop, restart samba via command line. I will try config package and hopefully that drops down everything,
[code]...
sudo service smbd restart unrecognized service, nmbd same thing. Now it is installed, but has no script file or the script file is not in the init.d folder like it should be still trying to figure I have come to the conclusion that the daemons are not installed and am trying to figure out what those script files look like or a way to import them off a ftp, however no luck with google so far. But the scripts files don't exist on my box. how do you install samba daemons when it says samba is already installed.
View 7 Replies
View Related
Apr 14, 2010
How can I make the security applet stop showing an update for firefox 3.5.9? I have a more recent version installed from mozilla repo: firefox 3.6. The mozilla repo already has a higher priority (95 instead of 99), so I don't know what to do.
View 5 Replies
View Related
Apr 18, 2010
Is it just me or your update applet also stopped working recently? I'm running Factory KDE-4.4.2 and openSUSE-11.2. It's always "Checking for updates..." without finding any, even though I can always see new ones through Yast - Online Update. And sometimes it asks me to accept some key, when I click OK it asks me for a root password but after I type in half of the password it simply disappears and starts "Checking for updates..." again without end.
And YAST doesn't show any newer packages anymore but rather has "Switch system packages" on the top. If I click on that, then it starts showing newer packages and wants to update them all. But what if I want to use Packman's packages for multimedia and Factory KDE for KDE? If I select "Switch system packages" for KDE then it will update, for example, Kaffeine to KDE's but I want to keep it Packman's. If I search for Kaffeine, it shows no newer packages, but if I go to Versions, there's clearly a newer version there!
View 3 Replies
View Related
Aug 21, 2010
Whenever I check for updates, or download/install them, the openSUSE updater applet never shows the loading bar. The border showing the loading bars position is there but the loading bar never appears. It always sits at 0% but still successfully complete updating.
View 9 Replies
View Related
Dec 7, 2010
Using XFCE with OpenSUSE 11.3. XFCE's Update Applet runs without superuser privileges. It finds updates without problems, but when I try to install them, it reports that it failed to authenticate or something like that. I have to start YaST Online Update module in order to install the updates. Is it possible to enable XFCE Update Applet to prompt for superuser authentication or to directly use YaST Online Update as panel applet, like in KDE?
View 2 Replies
View Related
Jul 13, 2009
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies
View Related
Dec 9, 2009
In my update tray applet I often get a notification saying an update for my system is available and when I click for details the only patch listed is dummy Patch. Anyone know what or why this is? It's happening on my 11.1 and 11.2 machines.
View 9 Replies
View Related
Apr 30, 2010
I have a minor problem with my "Update Applet 2.28.0" in Gnome. It occurs when I want to make the applet do one or more suggested update(s). It always asks me for the password of superuser/root: "Authenticate : Authentication is required to update packages. [...]". I think under my installation before (11.1 maybe updated from an older version) I could tell the automatic/semi automatic updater to remember the su password (in YaST or in the authentication dialog?).
In the help manual on my computer (and in the internet) there is the possibility to make the updater remember the password via policy kit: ("Access to all privileged operations is controlled via PolicyKit." See: GNOME Documentation Library : gnome-packagekit Manual : Introduction) I could not find any policy kid or any other possibility to give to the automatic updater (or its user) that privilege permanently (=to remember authorization). I think on a system with more (real) users this could be a real problem (not just an inconvenience).
View 9 Replies
View Related
Jan 8, 2011
I'm using openSUSE 11.3 with KDE 4.5.4. The updater applet works fine for me, however I think it only checks for updates from the update repo. I tried to modify this behaviour by right clicking the icon and checking "show available updates, when the backend provides it(for experts)" (translation from polish so it may not be 100% accurate) but the behaviour is the same, it only prompts me when there are updates available in the update repo but I would like it also to prompt me when there are updates available in the packman and KDE stable repo. Is it possible to force the updater applet to do this ?
View 3 Replies
View Related
Apr 5, 2010
i have huawei usb stick modem, i'm connecting to internet with wvdial command, i have configured the file "wvdial.conf" to be able to connect, everything works fine i guess but the update applet still show me the message
Code:
Unable to check whether updates are available
connect to the internet and connection manager too .. it tell me i'm not connected, i think i must configure my connection in an other way .. but i don't know how ..
View 5 Replies
View Related
Jul 19, 2010
i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies
View Related
Aug 27, 2010
I made a live USB memory stick / pendrive with Ubuntu netbook remix 10.04 using my desktop computer. I want to install / update my netbook that has no network function yet. I booted the desktop with the pendrive & ran update manager. I want to update the kernel so I will have the driver that will operate my netbook ethernet.Acer AOD260 has Ethernet Controller: AR8151 v1.1 Fast Ethernet, Atheros Communications & Network Controller: Broadcom 4727 (rev 01)and will not work from the current release of 10.04 (too new) but there are supposed to be drivers in the newer kernels.
Running Update Manager I get a box labeled "Debconf on ubuntu" & says "Configuring grub-pc". There is an entry box that says "linux command line:" & is empty. When I press the help button I get the message "The following Linux command line was extracted from /etc/default/grub of the 'kopt' parameter in GRUB Legacy's menu.lst. Please verify that is correct, and modify it if necessary.The installer is hanging, Preconfiguring packages ..., probably waiting for a response, but I have no idea what to do.
View 4 Replies
View Related
Sep 12, 2010
On Ubuntu Desktop editions, there is a GUI application which allows easily changing to a different server. It can even find out how one is the fastest update server.Is there a corresponding command line tool available to do this? Because I'm using the Server edition without GUI. I hate to manually edit /etc/apt/source.list.
View 4 Replies
View Related
Sep 29, 2010
I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.
View 4 Replies
View Related
Dec 2, 2010
What is the command line to update grub in mandriva 2010
View 5 Replies
View Related
Sep 8, 2010
In OpenSuSE 11.2 YaST -> Online Update Configuration I can configure how often the system should check for updates (i.e. daily, weekly). Does this operate independently from the Online Update Applet(kupdateapplet)? The reason I ask is that the Applet doesn't always seem to work correctly. However, if the system will check for online updates automatically regardless of the Applet, perhaps this isn't an issue. If I can avoid messing with the Applet, that would be great.
View 1 Replies
View Related
Mar 12, 2011
how do you download an update or an upgrade (or whatever it's called) on a command line. for chromium internet browser. opened the computer and couldn't watch videos. i tried all the downloads available on adobe's website and all of them are on my "downloads" folder and when i click on any i just get stuff i don't understand and i simply find it easier to download through terminal.
View 9 Replies
View Related
Apr 29, 2011
I upgraded from Meerkat to Narwhal. After all the files have been downloaded and installed it rebooted. Once it rebooted it went straight to the GRUB command line. After couple of hours of research, I ended up at
[URL]
My root was at (hd0,1). So therefore I put this in at the GRUB prompt.
set root=(hd0,1)
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
boot
I did what it said and it got me into Ubuntu. Nice! It asked me to: After successfully booting into the system the user should run sudo update-grub I did. Next it asked me to review (/boot/grub/grub.cfg). That's where it is hairy, my file has multiple root settings and with msdos settings. That doesn't seem normal.
[Code]....
View 3 Replies
View Related
Apr 30, 2011
I installed this graphics card update in kubuntu 11.04 [URL].... And when now kubuntu boots to a command line interface login screen I don't mind reinstalling to fix it, i would just like to install the latest version of the graphics card driver. I've tried twice with the same results, how i can fix it?
View 1 Replies
View Related
Nov 19, 2009
I compiled the 2.6.31.6 kernel and <insert drumroll> it boots!(my first kernel roll, I'm kind of shocked actually) That's the good news. The bad news is that my NVIDIA drivers are gone in the wind. That's not entirely true as I can still boot into the old kernel and startx. Is there a way to download the driver using the command line for reinstall?
View 4 Replies
View Related
Jul 30, 2010
running 11.3, installed k3b and a few other things from Packman. Now suse updates wants to replace k3b. I moved the suse update repo to priority 100, packman to 90. Still, it tries to apply the k3b update from the suse repo. I went to the updater in yast and told it to NEVER install the update, and also tried locking it (protected) and again, after a reboot, it checks for updates, and tries to replace my k3b. Then finally, the version in packman is NEWER than the one in the suse update repo
View 9 Replies
View Related
Jan 2, 2011
I noticed in phpmyadmin that we can export a database in type update. Indeed we have update... in place of insert.... is there anyone know if it possible by a command line or by a simple PHP code ?
View 1 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
