Anybody know if there's a way I can ssh into a remote box and have vlc start a movie on the remote machines display.
I have openvpn setup and can ssh to all my machines. I just want to freak the **** out of my sister when she jumps on the computer.
Opensuse 11.4 and Gnome
I cannot get x11vnc to start via ssh. I keep running in to this MIT magic cookie.
I have tried the -findauth and -auth guess but I am told .Xauthority is not set.
ps wwaux | grep auth which worked for me under KDE does not help.
I am using x11vnc so that I can export the active seesion :0
I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedI am using an Acer Aspire 5536 AMD dual core laptop with a 64bit installation of Susie 11.4. Using 11.2 I had no problems connecting to the wireless router. As soon as 11.4 was installed, clean install, and the laptop rebooted, network manager failed to start, until manually invoked and then enabling networking through the system tray. Even after this it will not connect to a wired or wireless network sometimes for more than 30 minutes.
View 9 Replies View RelatedI would like to use zypper to update openSUSE 11.2 through the Virtual Terminals (tty1 thro' tty6).
Network Interface is wlan0 (Wireless LAN, home network through a Router) that requires a password using WPA2.
My question is how to start wlan0 through the command-line ?
I have just installed opensuse 11.3. I am absolutely new for Linux and for this forum. I have tried to open Network manager to configure my wlan. But its not starting. How to start network manager and configuring my wlan.
View 4 Replies View RelatedI tried connect to internet through iPhone (bluetooth tether), so I followed one tutorial... It said I have to change "networkmanager" to "ifup" in yast>network settings, and make some other changes... I did it, but I couldn't connect via iphone... OK... I put back all changes, also changed ifpu to networkmanager.
After reboot, Knetowrkmanager gives me "network management disabled" on startup, instead of list of my networks.
Of course, I google for solution, but without any luck. And then, I don't know why, I killed Knetworkmanager, start it again, and.. it worked!
But now, I have to kill it, and start again always, when I reboot my laptop...(HP Compaq 6720s, BCM4312, KDE 4.3.4)
I have had a notebook with an ethernet plugged in cable before, sent a signal through the cable by resetting my router, and it switched my notebook on from cold. My question is, is there a way of doing this using a remote desktop client. Ideally, I would like a machine switched off at home running suse linux/windows, then have a client computer sent the remote request, this in turn activates the machine, which boots and then gives the rmote client control.
View 4 Replies View Relatedregarding a remote connection from my workplace to my home system. On my home a have a connection to the ISP and the provider is allocating a dynamic IP to my router. How can I connect from my work computer to the home computer? There are other application or other stuff for making this possible?
View 5 Replies View RelatedI can't seem to get Remote Administration (vnc) working for the life of me. I tried the ip4/ip6 fix and every other work around I could find. I simply can't figure things out. I can't say I'm new to Linux but I can say that I am quite new to openSuse and the RPM world in general. My actual error isn't much of an error but that of the vnc window just being a black window that eventually times out.
As of now I access and configure the box vis ssh.I'm using:
openSuse 11.3
Gnome Desktop
Installed from gnome live CD
How to limiting connection to a remote server.
We have set up a connection in OpenOffice Base to MtSql on a remote server - a very nifty thing.
We have OpenVpn set up - also works very good, in Yast - Security and users - allowed services - External Zone we have Mysql added so we can connect no problem.
My Question is : we can connnect using OpenVpn - through 10.x.x.x. but also via the normal address , 193.x.x.x.
How can I limit this, so people can only connect via the OpenVpn connection?
The clients are all OpenSuse 11.2, the remote server is OpenSuse 11.1.
Just a few moments ago I got notified by the remote desktop application that someone logged in. As I have not given out my remote desktop information to anyone it has to be some sort of attack. I immediately rebooted and I noticed erratic hard drive activity. A few applications with 'tracker' in their name were causing major cpu load so I killed them. Right now my computer is not logged into the Internet so it's probably impossible for any more of my data to leak out.
View 3 Replies View RelatedI want to create a user on my opensuse 11.4 computer, for the sole purpuse of using it to access network shared data (eg samba, nfs, etc). This user must be in the "Users" group, but it must NOT be able to login directly on the computer, i dont want him to show up on the GDM users list at logon, he must not be able to login to a terminal, etc.
How can i add a user like that? must he belong to a specific group?
i am suing SUSE 10.00 and i need remote assistance from friend in another country. I think this can be done in windows xp using "remote assistance". How can i do this using linux suse?
View 2 Replies View RelatedI have been reading up around the internet that although it is possible to use MSTSC.exe under Windows XP to connect back to a Suse machine running XRDP (I believe).I had been working fine with Suse 11.0 until today. I had not made any changes to my local network but now whenever I try to connect in, I am told that I can not start the session as the sesman logon fails!
I tail'ed /var/log/messages but there is nothing written to that log when I try (interestingly enough, I do get the logon prompt that requests username, password and session type - I usually select KDE3 but have tried all options - and get the error after clicking OK).
My questions:-
1. Is XRDP under 11.1 any better (more stable as when it worked, I use to get kicked out a lot under 11.0)
2. What log file should I be trying to tail so I can see what is happening?
I must use Linux as the back end, I don't want to use a hacked copy of XP anymore and don't want to pay �� for a real version when Linux is free and should by now be able to grant me access to my network from a remote location!VNC is not an option as I will be wanting to log on more than one user at the same time.
I have OpenVPN 2.0.8 installed configured to Ethernet Bridge BR0. All windows outside machines can "see" and mount remote inside firewalled machines (i.e. \machine1 or [URL]). However I can't access to inside windows machines with windows Remote Desktop
View 3 Replies View RelatedI may have to work in another state for some time, and I'd like to access my home machine desktop remotely, like this: Server - home machine, oS 11.4 64-bit, KDE 4.7, 1920 x 1200 screen (currently set to 24-bit color depth), 1 Mbps upload speed, behind a Dlink DL-524 router I manage.
Client: laptop, oS 11.4 64-bit, KDE 4.6.5, 1280 x 800 screen (also 24-bit color depth), unknown up/down speed - probably huge at work, crappy at apart hotel. I'd like to keep the server resolution, if possible, even if the client's is smaller. I want to be able to star/stop KDE apps in the server, move files between folders, and fix the issues that only happen when my wife is at the keyboard (it's a machine conspiracy, she says ). So I'd need to connect to the server's current session/user (which is myself, i.e., same login/password).
What do you recommend for this? I've read Swerdna's tutorial for 11.2/11.2 (a million seen malcomlewis xrdp 0.6 packages for 11.4 (you rock, malcomlewis!), as well as this thread: RDP into OpenSUSE 11.2, however most seem concerned with rdp between windows and linux boxes. Is there something better/faster/simpler for oS-to-oS RDP or should I use xrdp all the same?
Possible to have the Movie Player launch with the "Show Controls" option off?
View 1 Replies View RelatedPrinter is connected via USB to server PC running OpenSUSE 11.1 Client PCs are running 11.1, XP, Vista No problem printing from the Windoze machines
Printing is trouble free with the 11.1 client's firewall disabled, but no printer is available with firewall running.
In hopes of diagnosing the problem I figured I'd open everything I could think of until the printer remained available with the firewall running. Then I planned to start removing exceptions one at a time 'til removing one caused the printer to disappear.
I've gone to Yast>Security and Users>Firewall>Allowed Services>External Zone and tried addingSamba Server
NetBIOS server
Samba Client
Samba Server
VNC
[Code]....
When I execute Eclipse or Firefox remotely using ssh (on a LAN using ssh -Y user@remote-machine eclipse) they both look strange, the colors are kind of yellow. Logging in to the remote machine using NX or VNC and executing the same apps does not produce the same colors, the apps look fine. Executing the same apps on my local machine does not produce the strange colors either.The remote machine is a SLES 11 and the local is a openSUSE 11.3 (with KDE 4.5.2).This might seem like a small problem but it is annoying to work a whole day like this when the remote apps looks like **** on my otherwise beautiful KDE desktop
View 2 Replies View RelatedI'm new to the principle of network boot and I was wondering if this is possible. Computer A runs openSUSE. Computer B is an older, slower computer. Computer A and computer B are connected using an Ethernet cable that supports two-way transport. Can I use network boot on computer B to use the OS on computer A remotely while computer A is being used too? Does it involve RDP? Will the remote user experience noticeable lags/delays? What do I need to install on computer A to make this happen?
View 6 Replies View RelatedI have local and remote networks that have various printers. I can add any printer (local or remote) to any PC, except for one PC that's refusing to allow remote connection (it used to, but doesn't now!). The problem PC has two printers connected and work OK as a local printer, but both display same problem when attempting to connect from any remote PC via YaST. Using 'Connection Wizard> CUPS Server' connection method requires IP address of remote PC and printer name. But if I correctly select either of the two printers I get an error message:
"PING 192.168.1.149 (192.168.1.149) 56(84) bytes of data.
64 bytes from 192.168.1.149: icmp_seq=1 ttl=64 time=1.12 ms
Both printers are set to 'Accept Print Jobs' and 'Share Printers> Allow remote access' permits all networks to connect. why this PC is requiring the root password?
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies View RelatedI have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. how to keep the firewall running and allow the remote mysql incoming requests?
I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. Do you guys have any idea how to keep the firewall running and allow the remote mysql incoming requests?
Am in the process of upgrading from an ancient OpenSuSE release (7.2) to 11.2. One thing I have been unable to do that worked fine under 7.2 is remotely mounting a compact flash drive from an XP machine. Worked fine for many moons on 7.2:
# mount -t cifs -o rw //xpbox/'cf (H)' /cf0
I get:
mount error(12): Cannot allocate memory
Other cifs mounts of hard disks work fine.
I found a posting that says this means the memory allocation error is from the XP side. It says to fiddle with the XP registry, specifically IRPStackSize. I was not confident this fix would work since there should not be anything significantly more consuming with 11.2 compared to 7.2, and indeed, I got the same error after changing the parameter to 18 and rebooting the XP machine. Any ideas? I have some suspicion that the space and parenthesis in the share name might be fouling up someone. XP forces the share name to this for some reason.
I've got problems uploading files to a remote FTP server using passive mode with enabled SuSeFirewall2 (Using 11.2)
I've disabled Firewall and everything went ok. Why firewall disables or terminates OUTGOING connections to a remote FTP?
I finally got my wireless card to work but I don't know how to start the network manager.
View 3 Replies View RelatedI seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
i used to start vpn connections with knetworkmanaer in 11.3now i migrated to 11.4 and had to install the networkmanager plasmoid instead. the reason is variosu crashes and that knetworkmanager is unable to start 3g connections. however it was able to start vpn.now i am using the plasmoid and i can get the 3g started but not the vpn. when i click on the connection nothing happens.
View 9 Replies View Related
