If I set the level for headphone via Yast/Sound at 50% it is back to 100% after a reboot what gives Pulse-Audio vs. alsa ?I'm running a Dell latitude D830 and the card is 82801 H (ICH8 family) and the driver is snd-hda-intel.
View 3 Replieshello everyone, im having a problem when my computer enters in the run level 4 as the default when i start slackware. The strange thing is that it not seems that is a X window problem, it looks like more like a configuration problem in some part of the kde script to initialize the log in, because if i manually start the X service it works fine, i dont know what is the source. Thank you in advance for the help.
View 3 Replies View Relatedwhen my headphones are plugged into my computer, the sound comes from both the speakers AND the headphones. I just want the sound from the headphones if they are plugged in.
View 7 Replies View RelatedI'm having an issue with my computer and the headphones. When I plug in the headphones into the headphone jack, the sound plays through the headphones but it also plays through the speakers as well at the same time. I've attempted to play around with the sound settings to see if I can get this issue resolved but I have not been able too. Computer specifications are in my signature.
View 3 Replies View RelatedI have a problem with sound on a laptop (ASUS X52Je). I have sound from the speakers and in headphones when headphones are connected (jack). Earlier on ubuntu (gnome) after connecting headphones, speakers in the laptop is automatically muted.I would like that when you plug headphones music was only in them, and after disconnecting automatically returned to the speakers in a laptop.
View 2 Replies View RelatedI just installed OpenSUSE 11.3/KDE4 and now I have no sound from the headphone jack. I checked Kmix and everything is fine.I do remember that in OpenSUSE 11.2 I had this similar problem which I solved by switching ON/OFF the "Independent HP" option in Kmix. The problem with 11.3 is that this option is not available in Kmix.
View 9 Replies View Relatedopensuse recognises my logitech usb 350 headphones, but no sound comes out of them. i can speak into the microphone and hear myself through the speakers of hte headphones, but general audio like ..... or mp3s all come out of my onboard sound card (which appears to work fine).
View 9 Replies View RelatedHeadphone jack seems completely unresponsive after a fresh install of openSUSE 11.4. Here are my outputs:
[URL]
-->From rpm -qa '*alsa*':
alsa-devel-1.0.24.1-4.7.1.i586
alsa-plugins-maemo-1.0.24-6.1.i586
alsamixergui-0.9.0rc1-749.1.i586
[Code].....
I am using opensuse 11.2 KDE. I hear sound only in headphones but not in speakers of laptop COMPAQ presario 2700. /etc/modprobe.d/50-sound.conf looks like this:options snd slots=snd-intel8x0# W60f.Zmi7iE4Vbq5:82801CA/CAM AC'97 Audio Controlleralias snd-card-0 snd-intel8x0
I have an old Acer Travel Mate 290 with OpenSuSE 11.3 (LXDE) 30G and 240Mb RAM. I don't have sound in the internal speakers, I only have sound through the headphones. Here you will find the information of alsa-info.sh [URL]
When I type:
rpm -qa '*alsa*'
alsa-utils-1.0.23-1.8.i586
alsa-plugins-1.0.23-1.9.i586
alsa-1.0.23-2.12.i586
alsa-firmware-1.0.23-1.2.noarch
alsa-oss-1.0.17-29.2.i586 .....
This is a Lenovo L512 laptop with Intel HD Audio (Realtek ALC269 / Intel G45 DEVIBX) which was recently upgraded to Squeeze. I've been having trouble using the headphones on this machine, as the speakers continued to play while the headphones were connected. I normally use KDE, and the available mixer only offers one channel. I thought I might be able to manually silence the speakers by using the command line tool alsamixer. Unfortunately, alsamixer has a channel for the headphones, but it doesn't do anything, only master volume is controllable. By luck I decided to play around with Gnome today and to my great surprise, System -> Preferences -> Sound offers complete control over all functions of the audio hardware. Does anyone know how I could get these features working under KDE?
View 3 Replies View RelatedI recently built a new computer, and my sound works fine, but the speakers don't mute when I plug my headphones in. The headphones work, other than there is also sound coming from the speakers.
View 9 Replies View RelatedI might have a different problems as I have a newer laptop, a HP dv6-2170us with intel i5 cpu. I had no wireless with the 2.6.31 kernel so I upgraded to the 2.6.34 and had to manually compile my wireless driver. Everything works great now except the sound issue. I thought it use to work out the box with the old kernel, but then again I might be wrong. I knwo it works in the "other os" dual booting and all. Its a not a huge issue, but hopeing I could resolve it. Here is some of the info from reading some of the other posts. the model=dell-vostro I just tried to see if that works, which is doesnt, so thats why thats in my sound.conf file.
[Code].....
Have I missed anything? I have tried the fix here: Audio coming from both headphone and laptop speakers - Page 3 - openSUSE Forums page 3 about adding a repo and upgrading, but that upgrade wants me to revert back to the older kernel in which case I dont have wireless support or acpi working proporly, so thats not a doable thing for me.
Yesterday I installed openSUSE 11.3 on a desktop PC and I noticed that the PC's speaker it's not functioning but if I plug the headphones I can hear the sound system working.
View 8 Replies View RelatedI have openSUSE 11.4 KDE version (64-bit) on a desktop PC. My sound card is ASUS Xonar DX 7.1 (PCI-E). I am brand-new to the Linux experience. I get audio out to my speakers which are connected to the jacks of the rear I/O panel of my PC. I do not however get audio out to my headphones which are connected to the jack in the front panel. I know that the headphones work fine because they do so when I boot up in Windows XP. Here is what I discovered so far: KMix does not show that I have a front panel audio channel. But when I run AlsaMixer it does show that I have such channel and, upon manually turning the volume on, I do have sound out to the headphones.
Therefore, I deduct that I have some sort of configuration problem with KMix and would like to fix it as I prefer to use the GUI interface instead of the AlsaMixer one. It's just a matter of preference! I would like to troubleshoot things using the Audio Troubleshooting guide (SDB:Audio troubleshooting - openSUSE) but I notice that openSUSE's version 11.4 is not mentioned in it. Should I follow the instructions for version 11.3 or wait for an updated guide?
I have just installed OS 11.3 onto a lenovo desktop / Thinkcentre that previously had vista installed on it. With Opensuse I am having trouble getting much sound volume. With Vista the volume was fine but with Opensuse I have PCM, Master running pretty much on full. This gives me a respectable volume but I think there should really be more left in the tank from what I have it at. Is there any way to increase the gain in Alsa? The sound device shows in KDE as HDA Intel (AD198x) using xine backend.
View 8 Replies View RelatedI'm using OpenSuse 11.4 64 bits with KDE 4.6.00 (4.6.0) "release 6". Since several days, the sound level setting via the sound icon at the right of the task bar is very slow, ie it takes several seconds (not to say one minut or more) between the action of increase / decrease the sound level and the effect on the sound level.Same behaviour when I select this sound level icon at the right of the task bar, the cursor appears one minut later.
View 3 Replies View RelatedI have an issue where my laptop speakers work just fine, but when I plug in headphones, I get no noise. I'm using openSUSE 11.4.I found others with the same issue, but this guy's solution looks like he might be using some different version and his solution doesn't work (can't find the file he edited).
View 7 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I've been able to kludge a kill script which finds the correct pid for the kdeserver (or gnome server) after my system comes up in run level 5 so I can drop back to run level 3 mode. Lots of experimentation showed me that using telinit 3 and telinit 5 would occasionally leave the video memory in a mess and I would have the black screen of death.
I set the security parameter setting to autologin for me since I am the only user of my machine, but I still have to kludge the default setting under sysconfig (the DEFAULT_WM) under Window Manager to pick a certain window manager, so it takes time to manually switch the desktop.
Right now I can leave the gui and drop back to cli, but painful experimenting showed me that killing the X server is a no no. Right now I kill the kde server, which sends the SIGTERM to the X windows manager, which then figures out that it has to shut down.
Questions: Is there a better way of doing this? Apparently openSUSE figures that we have multiple users logging into the gui desktop, so the gui is always kept running and a login window with the desktop manager option forces the user to login in. With autologin, this never happens, but no choice of desktop is possible on the fly.
Can some type of script be set up to painlessly enable this to happen? And what is the best way of bringing either the Gnome or KDE desktop manager down gracefully? I do get lots of error messages as the system attempts to recover and X shuts down. It appears that apparently the single user with autologin is left out in the cold.
I want to install a software called TinyOS which is an operating system designed for wireless sensor embedded networks in my account. The problem is it has instructions to install the software as an administrator since i'm not an admin of the department network i can not able to install. Is there any method to install this software as an user level rather than admin level.
View 3 Replies View RelatedMy usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
View 1 Replies View RelatedI have sound on my main speakers and I can control volume from the desktop's icon tray volume control on the screen.However, my headphones were working just fine until all of a sudden they just stopped working. I tried other headphones but no change.Also, my volume control on my keyboard suddenly stopped working too.Any ideas how I can get the headphones and keyboard volume control working again?
View 1 Replies View Related[code]...
you can find a cutout of an output generated by "iwlist s" command for a cell. Does anybody know what Quality, Signal level and Noise level mean? What is the definition of them? I searched for it and could not find good information on it. What do these Extra:*** fields for? What does it show in the example above? How were those values computed?
[code]...
I am trying to edit /etc/inittab so that I can make run level 3 as my default runlevel but whenever I try to edit it, it opens in read only mode. I am logging in as root still not be able to edit the file. It still shows read only. Also tried chown/chmod to change the file permission but it won't let me change anything related to inittab. Also checked the /boot/grub/grub.conf to see if the file system is mounting as ro. Also tried with rw but didn't work.
View 7 Replies View RelatedI have 2 sound cards : one is on board and other is Creative sound blaster.I want to play sounds just on Crative.The problem is when I reboot the PC the sound is change,sometime the default sound card is Creative sometime is the onboard card.I want my default sound card to be only Creative.
View 2 Replies View RelatedI need to change the default zoom level for Evince. There must be some way to do this. Besides, can Evince start without any PDF file loaded? Also, what is the command line to execute evince? (I run Linux Mint 8 based on Koala 9.10). Whenever it loads a file for which it assigns a zoom level more than 175% or 200%, the whole PC hangs if I click on the "reduce zoom" icon in the toolbar. This is a very big regression.
This is ridiculous! Even ePDFViewer is better than this. I really would like to stay with Evince for the time being, and not need to move to Foxit.
I use headphones and have an MCP73 sound device; am running OpenSUSE 11.4.
On each restart, I get no sound. I have to go to YAST, Hardware, Sound, Other, Volume. The 'Other channels', Front slider is at 0%. If I slide it up to 100%, my headphones start working. At this point the Help text says to press 'Next' to save the settings, but there isn't a 'Next' button...just a Cancel and OK. OK keeps the new setting, but apparently doesn't save it permanently.
What can I do to avoid having to reset this slider every time ?
I'm a beginner with Fedora, I decided a few weeks ago to test it. Yet, I have some trouble with the sound. I have two cards:
Code:
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
When I have done the installation the sound work great, but now I have to use my headphones if I want to heard something.
Just installed Ubuntu a few days ago and have most things working except the sound. Here is the information I'm given when I type aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
I am getting no sound at all, with or without headphones.