Fedora :: Playback Error Encountered - Missing Plugin
May 25, 2011
I'm completely new to Fedora. I've tried using both Rhythmbox and Exaile to no avail. I keep getting a message that says "Playback error encountered! Your GStreamer installation is missing a plug-in." I have searched all over countless forums and blogs trying to figure out this issue. I went into add/remove software and searched GStreamer and basically checked everything that appeared to be what I needed, but that still hasn't worked. Insanely annoying not being able to play my music and even more annoying because I never had this issue with Ubuntu.
View 1 Replies
ADVERTISEMENT
Apr 17, 2009
When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies
View Related
Jul 13, 2010
When I try to use Rythmbox, I got a message error saying that your "GStreamer installation is missing a plugin" and it says that is ID3 tag demuxer I already have this streamer plugins installed, so I don't know which one is missing
[Code]...
View 5 Replies
View Related
Sep 15, 2009
I'm trying to view a movie in totem but an error occurs saying missin plugin text/html totem can't find im when it asks to search for. what can i do to solve this error
View 5 Replies
View Related
Sep 19, 2009
when i got play any movie or song i got some error which show below error:The playback of this movie requires a MPEG-1 Layer 3 (MP3) decoder plugin which is not installed.
View 2 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
Aug 22, 2009
While doing 'yum update' an error message was issued during clean up phase:
Code:
Cleanup : elfutils-libelf-0.141-1.fc11.i586 110/180
ERROR: Module uprobes does not exist in /proc/modules
Cleanup : systemtap-0.9.9-2.fc11.i586 111/180
Does this represent some kind of problem or can I just ignore it?
View 3 Replies
View Related
Jul 14, 2010
I installed Fedora 12 at school on my external hard drive, using Windows Virtual PC 2007 to run Fedora at school on a dell PC with XP 2000, which works at school!However at home, i am using Windows 2007 os, I install Windows Virtual PC 2007, wasn't successful in running Fedora 12.As soon as Fedora begin to boot, an error message appeared which said,"An unrecoverable processor error has been encountered.The virtual machine will reset now".below the message it gives you only option to reset the virtual machine, however this is a vicious cycle
View 1 Replies
View Related
Dec 13, 2010
I got the error: "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have edited the options in installation screen with adding noreplace-paravirt at the end of boot parameters. but still have this error and FC installation does not continue.
View 11 Replies
View Related
Feb 7, 2011
I am trying to run Fedora 14 from Virtual PC 2007 on Windows XP. Every time I try to boot it, it flashes some code and shows a blue screen with the Fedora logo for a fraction of a second. It goes to an ms-dos type screen with a white background and a single "[" in black. Then I receive an error saying "An unrecoverable processor error has been encountered. The virtual machine will reset now." I have googled many times and have scavenged the Fedora site for a solution, yet I have not found one for Fedora 14.
View 3 Replies
View Related
Aug 16, 2010
I installed an MP3 plugin, and tried to play a podcast on Rhythmbox, and was presented with an error message, which said: Your GStreamer installation is missing a plugin. How can I remedy this?
View 1 Replies
View Related
Jan 28, 2010
I been havin a problem whit the installation of fedora 12 on virtual pc, gives me the error:
"An unrecoverable processor error has been encountered.The virtual machine will reset now."
View 7 Replies
View Related
Mar 7, 2010
I tried the "rpm", the "yum", and the "tar.gz" from the adobe site. Both rpms installed fine but I still can't view flash content in Firefox (missing plugin). The .tar.gz contained a .so file, but the installation instructions for the flash player said I should see an installer file in the .tar.gz, but I do not. I can't believe I can't even get flash player working. Their instructions said to check under "Help > About Plugins" but obviously Firefox does not and has never had such an option. I hate Adobe.
View 2 Replies
View Related
Aug 27, 2010
I'm using fedora 13 x86_64 and firefox. I have installed flash player: flash-plugin-10.1.82.76-release.i386.rpm.
Whenever I open any website having flash content, firefox shows missing plugin symbol and message.
View 3 Replies
View Related
Mar 21, 2010
I am not able to play certain encrypted DVD's under Lenny. Some of these DVD's worked fine in a previous installation (Mandriva 2008.1) in the same laptop (nx6125). I tried with several players (Kaffeine, vlc, mplayer), but nothing works. I know that the DVD drive is OK, since I was a able to watch an unencrypted DVD. I also have libdvdnav4, libdvdread3, libdvdcss2, w32codecs already installed.
This is the error message from Kaffeine:
07:06:12 PM: xine: cannot find input plugin for MRL [dvd:///dev/hdc]
07:06:12 PM: xine: input plugin cannot open MRL [dvd:///dev/hdc]
07:06:11 PM: xine: found input plugin : DVD Navigator
And this is from vlc
tommy@tardis:~$ vlc dvd://
VLC media player 0.8.6h Janus
libdvdnav: Using dvdnav version 4.1.2 from [URL]
libdvdnav: DVD Title: DVD_VIDEO
libdvdnav: DVD Serial Number: 2E904DAF
libdvdnav: DVD Title (Alternative):
libdvdnav: Unable to find map file '/home/tommy/.dvdnav/DVD_VIDEO.map'
libdvdread: Invalid main menu IFO (VIDEO_TS.IFO).
libdvdnav: vm: failed to read VIDEO_TS.IFO
libdvdread: Invalid IFO for VMGM (VIDEO_TS.IFO).
libdvdread: Error cracking CSS key for /VIDEO_TS/VIDEO_TS.VOB (0x00000180) .....
[00000277] dvdread demuxer error: read failed for block 0
[00000270] main playlist: nothing to play
View 9 Replies
View Related
Aug 21, 2009
I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
View 1 Replies
View Related
Jan 17, 2011
While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:
Code:
Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)
Code:
[URL]
After finding no help there, I ran rhythmbox -d to debug:
Code:
(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized
[code]....
View 1 Replies
View Related
Dec 23, 2010
I recently encountered an error with pppd on both openSUSE 11.2 and 11.3. I use umtsmon (which uses pppd) to connect to the internet with my 3G device. Yesterday for some reason it just plainly refused to connect to the internet. I have been using the same configuration for almost a year now without any issues. I tried it on 4 different computers running 11.2 and 11.3 and all of them failed. Thinking that it is the hardware I borrowed a windows laptop and tested it on that, only to find that it works flawlessly. On my network server I sometimes use the device as a backup and activate it with "ifup modem0", for some reason this also now fails.
After doing some troubleshooting I managed to extract the following from pppd.
Running it with my user account:
pppd options in effect:
I have no idea why pppd would break all of a sudden but I expect it might have been an update that broke it since I have automated updates on all of my systems.
View 1 Replies
View Related
Jan 8, 2011
I recently had a hard drive on a computer (not to be obvious), and I fried the computer. You may ask "well why did you do that?" well, simply because I had accidentally bumped and switched to 220 volts, rather than keeping it at 115 like a sane individual. Anyway, I got a new computer, swapped the hard drive. When I go to boot into ubuntu though, it gives me the following error:
Code:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) No devices detected.
I also have XP on this hard drive, and it works almost better than it did on my old one, surprisingly. all i have to do now for it to be labeled as efficient, is to get some RAM. But anyway, what can I do about the error message? I tried booting into recovery, running dpkg from the list of options, and it did a couple of things.
View 3 Replies
View Related
Aug 8, 2010
When I first got Ubuntu a few weeks ago, and got the older version of Wine from the Software Center, and it could run pretty much any game I wanted. Albeit really slowly. Well, I upgraded to 1.2 using the instructions on the wine website, and now a couple of my low-power games (like Bootfighter Windom XP) run totally perfectly, but a lot of mainstream games like Mirror's Edge and Mass Effect 2 just crash when I attempt to open them, and all they all have the same message where the main .exe file has "encountered a serious error." Here's what the terminal gives me:
Code:
Backtrace:
=>0 0x68286bbe in libc.so.6 (+0x110bbe) (0x033bd9c0)
1 0x693815a1 in winhttp (+0x115a0) (0x033bea20)
2 0x69381aa1 WinHttpQueryDataAvailable+0x60() in winhttp (0x033bea70)
0x68286bbe: fmull 0x488bdc4a(%ecx) .....
View 7 Replies
View Related
Aug 19, 2010
I'm having some trouble installing Ubuntu 10.04. What I am trying to do is completely wipe all things on my computer and install Ubuntu. I have followed the instructions from Ubuntu's homepage on how to download the ISO, and ran their program to put it onto a portable USB device. Through doing all of this, I receive no error messages. Then it tells me to change the BIOS to boot from USB, so I did that. I've successfully accessed the install menu and filled in all the information requested (i.e. computer name, account name, etc.). I select that I want to delete the current partitions and use only Ubuntu. It starts to install, but at 67%, while copying files, I receive an error.
This error is:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error
This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
View 9 Replies
View Related
Apr 29, 2011
Code:
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_natty-updates_universe_i18n_Translation-en
E: The package lists or status file could not be parsed or opened.
Get this kind of error while trying to update Natty.
View 5 Replies
View Related
May 27, 2011
I'm a first time user of xubuntu or any other linux derivative operating system and I was wondering if I could get some assistance on installing xubuntu 11.04 on my old laptop. When I downloaded the iso and burned it into a DVD+R, I inserted it into the machine and let it ran. It started well and I checked the disc's integrity before continuing with the installation and it passed that. Now, as I enter the installation screen, I select my language then click forward but the installer freezes for a few minutes and later disappears only to be replaced with an error message, "The installer encountered an unrecoverable error. A desktop session will now run so that you may investigate the problem or try installing again." and it does as it says and boots into a demo mode. I try installing again through the "Install Xubuntu.." link on the desktop but it follows the same problem.
My laptop's specifications are as follows:
ACER TRAVELMATE 290
256 RAM (240 usable)
Intel Pentium M processor 1500 MHz 599 MHz
Video card: 64 MB internal Intel 82852/82855 GM/GME Graphics Controller
Sound card: Realtek AC97 Audio
View 2 Replies
View Related
Jun 5, 2011
I have an error message that I do not understand nor know how to resolve:
E: encountered a section with no Package:header
E: Problem with MergeList/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_natty_partner_b inary-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache>open() failed, please report.
I hope this is simple for some of you!!! I do not have a clue what this means, I'm pathetic.
View 3 Replies
View Related
Jan 6, 2010
Personally I have an intel PC which runs Ubuntu 8.04 smoothly. I tried booting the live-cd from an AMD athlon and encounterred the above mentioned message as an error after loading. I went into the bios and disabled the floppy drive as a third booting option as the machine does not have one in it but I still encounter the same problem. I can insert the floppy drive but doubt that would work?
View 1 Replies
View Related
May 19, 2011
i am graduate student and my X colleague gave me this Fortran 77 program to run my result files with. She is no longer reachable. I compiled the following program with gfortran, it compiled well but, when i run it, gave me end of file error. My output file (which is the input file for this program (DFILE1) ) has about 78,000 lines of velocities of atoms (Vx, Vy, Vz with 1000 steps.. an example of some of the atom's velocities in the 1st step is given at the end of this program). I will be highly obliged if any one can help me with this.I run this program on opensuse linux 11.3 version /32 bit/i586
error message:
Code:
At line 124 of file v.autocorrelation.f (unit = 10, file = 'DFILE1')
Fortran runtime error: End of file
Code:
PROGRAM TCORR
COMMON / BLOCK1 / STORX, STORY, STORZ
COMMON / BLOCK2 / VX, VY, VZ
COMMON / BLOCK3 / VACF, ANORM
C *******************************************************************
code....
View 6 Replies
View Related
May 15, 2009
i'm trying to install a plugin witch will let me watch movies in .wmv format. I can't seem to find it. also, i would like to get a converter that will allow to change the format of the video from .wmv to .divx.
View 1 Replies
View Related
Oct 2, 2009
Code: [root@enhu Download]# su -c 'yum install flash-plugin nspluginwrapper.x86_64
> nspluginwrapper.i586 alsa-plugins-pulseaudio.i586
> libcurl.i586'
Loaded plugins: refresh-packagekit
Existing lock /var/run/yum.pid: another copy is running as pid 3703.
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: yum
Memory : 43 M RSS ( 55 MB VSZ)
Started: Sat Oct 3 00:36:31 2009 - 13:48 ago
State: Traced/Stopped, pid: 3703
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: yum
Memory : 43 M RSS ( 55 MB VSZ)
Started: Sat Oct 3 00:36:31 2009 - 13:50 ago
State: Traced/Stopped, pid: 3703
This keeps going on and on and it don't end until I hit ctrl c. What does this error mean and how can I solve this?
View 1 Replies
View Related
Mar 29, 2011
I was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
View 6 Replies
View Related
